So far I replaced my glow plugs and module, SRS light, changed my brake pads and rotors, and did a transmission oil change thanks to this channel. Thanks so much for sharing all this info!!!!
Owk, tomorrow im gonna look at my benz w168 2003 model and see why is not reading safety belts and why srs is there, is it normal for a car to go to limp mode when it has srs light on?
Great video and very will explained. Got Mercedes vito 2013 last week and the wire which connects to the seatbelt buckle plug has been cut for some reason. Basically the plug for the seatbelt buckle is there but the plug which comes from the vehicle is missing. When I drive keep dingling sound there is no srs light but the light for seatbelt dosen't appear at all on the dashboard. I m thinking of removing the plug and connecting the wires wich is brown to blue and green to yellow. Sorry for the long post, i hope it makes any sense
Update. I've connected the wires and the srs light came on. The scanner showed faulty seatbelt buckle. I've ordered the buckle and should arrive on Tuesday.
Ran into not being able to read any hvac data on a 2013 sprinter last week. Front ac cold rear hot. 2 compressors had to check everything manually found pressswitch on the roof stuck at low voltage wouldn’t respond
It seems that your test light bulb has some resistance but not much as a short to ground was tripped. I believe that the seat belt assy has a higher resistance to prevent the short to ground code, it would have been nice to check the closed circuit switch resistance, next time, thanks for all the great videos THUMBS UP.
Hello, my boss in fact you're doing a great job i feel the work so much. please i am Mercedes Benz specialist from Ghana 🇬🇭🇬🇭🇬🇭-West Africa please can i get any help from you? About the sprinter van and etc...
@OdehyeAutoBenzElectricals-dt2 Hello my Friend you can email me at Deo@calleva.org if you have any questions or you could ask questions here in the comment section so everyone can help as well!
hello kits I have 2016 sprinter 2500 2.1 engine diesel could you please help me and tell me where is the front crash air bag system sensors are located in my van . I look in front of the van but I didn't found nothing any help I really appreciate
Ok but if I don't have probes that small would jumpering the connector do the same thing as running the current through the bulb filament? Am I thinking right?
So far I replaced my glow plugs and module, SRS light, changed my brake pads and rotors, and did a transmission oil change thanks to this channel. Thanks so much for sharing all this info!!!!
@firpofutbol My Pleasure! I'm glad to hear that the video have been helpful
Professional Auto Technician because of you bossman
@user-uj1xg7hb2u Thanks!
You are awesome! So, I can fix my SRS light on problem. Thanks!
@peterc2312 My Pleasure!
Quick n easy, saved me time and money @ the dealership 👍🏽
@Chris.Elegance My Pleasure!
Amazing work, like always!
DinhaS Thank you!
Thumbs up, of course. Did the customer noticed that you installed the switch reverse? Or you flipped it over before he/she got the vehicle? :)
@TheRossz Thanks!
Great video 📹, very well explained. Thanks 👍
@marvinisales5357 My Pleasure!
Wonderful job .Thank you so much
@timmytran2616 My Pleasure!
Very well done. 🎉
@cnevins3866 Thanks!
Good job my friend , thanks
Mohammad Al-Gebaly My Pleasure my Friend
You are the best thank you
@novader007 My Pleasure! Thanks
thank you sir, good explanation
@gpoint4513 My Pleasure!
Owk, tomorrow im gonna look at my benz w168 2003 model and see why is not reading safety belts and why srs is there, is it normal for a car to go to limp mode when it has srs light on?
@Hiddensecretsrevealed No, not really
Can you use that light bulb test to test out any switch circuit to confirm voltage & ground are closing ?
sneakdza YES!
Great video and very will explained.
Got Mercedes vito 2013 last week and the wire which connects to the seatbelt buckle plug has been cut for some reason.
Basically the plug for the seatbelt buckle is there but the plug which comes from the vehicle is missing.
When I drive keep dingling sound there is no srs light but the light for seatbelt dosen't appear at all on the dashboard.
I m thinking of removing the plug and connecting the wires wich is brown to blue and green to yellow.
Sorry for the long post, i hope it makes any sense
PurePlay ok! can you get the right connector for the seat belt switch?
Update. I've connected the wires and the srs light came on. The scanner showed faulty seatbelt buckle. I've ordered the buckle and should arrive on Tuesday.
@@pureplay4020 Did you fix it with the new buckle?
Love this channel, do you work on diesels ?
sneakdza Thanks, yes I do!
Hello. I had a friend diagnosed my 2009 sprinter and it said “ driver airbag squib circuit 1 open” do you think it’s the same seatbelt issue ? Thanks
@alexdo1978 Probably!
Ran into not being able to read any hvac data on a 2013 sprinter last week. Front ac cold rear hot. 2 compressors had to check everything manually found pressswitch on the roof stuck at low voltage wouldn’t respond
Phil H Huh! That's intresting!
It seems that your test light bulb has some resistance but not much as a short to ground was tripped. I believe that the seat belt assy has a higher resistance to prevent the short to ground code, it would have been nice to check the closed circuit switch resistance, next time, thanks for all the great videos THUMBS UP.
@DuaneDonaldson My Pleasure!
Good video my friend.thank U
@SajidHussain-rl9ey My Pleasure! Thanks
Good explanation
Naji Husseini Thank you!
Very helpful video! What scanner do you use?
MikeTheGC Thanks. I used my snapon zeus in this video!
I have a 2010 and 2022 sprinter, what scanner should I buy?
@@MikeTheGC I would recommend an AUTEL Scanner on Sprinters
@@KITS_Auto_and_Truck_Repair Thank you!
@@MikeTheGC My Pleasure!
Hello, my boss in fact you're doing a great job i feel the work so much. please i am Mercedes Benz specialist from Ghana 🇬🇭🇬🇭🇬🇭-West Africa please can i get any help from you? About the sprinter van and etc...
@OdehyeAutoBenzElectricals-dt2 Hello my Friend you can email me at Deo@calleva.org if you have any questions or you could ask questions here in the comment section so everyone can help as well!
@@KITS_Auto_and_Truck_Repair ok sir i head you thank you very much
@@ODEHYEAUTOBENZ My Pleasure!
hello kits I have 2016 sprinter 2500 2.1 engine diesel could you please help me and tell me where is the front crash air bag system sensors are located in my van . I look in front of the van but I didn't found nothing any help I really appreciate
@Mrjfox818 send me an email and I will send you some tips and info about this van!
i have this very issue and was debating spending the $120 to find out. Couldn't this test be done with a multimeter? Why the bulb?
barkingnomad.darren I prefer using a test light! it helps check the circuit integrity!
Ok but if I don't have probes that small would jumpering the connector do the same thing as running the current through the bulb filament? Am I thinking right?
You full time mechanic? That your own shop or you work for someone else?
Phil H Yes I do this Full time, The shop is not Mine!
tks
dan man My PLEASURE!
Grasias
Martin Arrieta My Pleasure!
Are you located in Woodbridge va
@bigrob105 I'm located in Dickerson MD, it's about an hour from VA, you can email me at kitsautoandtruckrepair@gmail.com for shop info!!