ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- We changed the engine and battery of the remote car
We have upgraded from 4.8v to 7.4v Lipo battery
Longer Driving and More Powerful Engines
beerkdemirci Subscribe: bit.ly/3cmVk0Z
Abone Olmayı Unutmayın: bit.ly/3cmVk0Z
Would You Like To Support Me In Patreon?
/ berkdemirci
You should add link or tell that where did you get the motor and battery from
With this same car I used a 5V, 2.1A power bank but only steering is responding. Power goes off when I press forward or back. Is it because the 2.1A circuit is too low?
Yes, same thing is happening with me, I tried to increase the voltage using boost converter but speed is increasing gradually.
六年前我做了和你相似的事，我用了一块3.7v电池，用DC-DC升压模块提升到5.5v，不能正常工作，现在明白为什么了，电机的启动电流很大，你的充电宝还有我的DC-DC升压板都不能提供足够大的启动电流，也许直接替换成3.7v的电池是可行的
Really your video is worth millions of likes but unfortunately it's not, but it's yes from my side
He use dc motor 180 and battery is nine volt rechargeable battery
Fun fact: The price of the battery is more than the rc car's price😂😂
True 😸
alternative for that you can use a old phones battery and solder the wire from the original battery to the phone battery
What tools do you use to cut and sauder? Links?
what motor are u using bro
I expected it to be stronger. but it is not. not worth the hassle
They use modified tamiya engines? Does it mean I can make it faster by placing a hyper dash on it?
No, it's not recommended using tamiya engines, imho it's different torque, u will loss lots of torque if use tamiya engines
what is the name of the battery that you used?
and
by using high power battery does the chip get damaged..?
upgrade the dc motorwhat is dc motor name and price
My Rc is having 4.8v 2000mAH battery input. can i also upgrade it to 7.4v without changing the motors? will it kill my motors?
Yes
no it will not kill your motor but ur rc car might catch on fire ur using way too much volt
Hai bro.. Can you share what kind of motor you use?
Belkul mast kam kar raha hai
Nice
I upgrade this car to 5km long distance + fpv camera
You should upgraded the transmitter into radiolink rc4gs
WE Have rhe same car Lol
Good bro
New subscriber
I saw cat, i like
nice
what motor did you used?
dc 130 motor 7.4v
@@ProMaker0 it's 180
It’s not powerful
You stole my 180 motor idea😠😠
its actually 130 dc motor 7.4v
No speed
Its working awesome, but lately you might get jitter
He used 180 motor
price
So much waste of time . . . And you ruined rc car. Result is =(0).
Everybody can make more powerful rc car to put stronger battery. It's much
easier.
more battery = more volt ur circut board is gonna wear out soon then ur esc will over work then ur ESC with break
@@faizkun4889 Teoreticly you're right,
but increase from 6V NI-MH, to 7.4V (LI-PO),speed and strength is almost double more. I'm using car for 2 years.
@@socamirkovic4046 Or Here is better idea put 20A Esc tx4 transmitter comes with reciever buy some new motors stronger one and just add stronger battery boom simple
@@socamirkovic4046 but dont go beyond its limit that stock circut board trust me you dont wanna burn you stock circut board😂
@@faizkun4889 Your idea for transformation is joke.
I did it for nothing: 2× Li-po from my
drawer, and 30min for connection.