Hi Gabriel, no because the 3M adhesive is quite strong and we use clear acrylic. Another option you can do is our double-sided thin engraver's tape that would leave less of a mark.
@@robertweekley5926 it is possible with our galvo fiber lasers but it's not ideal. Because the galvo (SpeedMarker) is extremely fast you can do thousands of passes quickly, but not with flatbed lasers like the Speedy series.
@@TrotecLaserCanada Hi. I’m here for a school project. With aluminium could you just use 2d design to make fancy details? I don’t necessarily need to cut through it, just make detailed prints. The design is either going to be a circle, 12cm by 12cm, 1cm thick, made of Matte grey stainless steel Or Grey bushed aluminium alloy of something. I don’t know how to cut a metal circle 1cm thick 🤷♂️
Why go through the time and expense of inlaying magnets when your laser can cut rubberized magnet sheet that comes with an adhesive backing to the exact profile of the acrylic? I cut 1.6mm thick rubberized magnet with a 10W diode laser @ 100% power and 4mm/sec. One pass will cut through cleanly.
very nice
Couldn't find the magnet inserts on your site, please provide a link.
Does the residue from the adhesive on the front side of the trolase eventually fade so it can not be seen through the clear acrylic?
Hi Gabriel, no because the 3M adhesive is quite strong and we use clear acrylic. Another option you can do is our double-sided thin engraver's tape that would leave less of a mark.
Thank You
ótimas ideias!!!
Abrigado!!
Can these laser cutters cut sublimation aluminum or hardboard?
We've never tried hardboard but since its organic that shouldn't be a problem. As for aluminum, no unfortunately we cannot cut metal.
@@TrotecLaserCanada Thank you for the reply.
@@TrotecLaserCanada - Well, what if you made Multiple Passes, in Vector Cut settings? On thin Aluminum?
@@robertweekley5926 it is possible with our galvo fiber lasers but it's not ideal. Because the galvo (SpeedMarker) is extremely fast you can do thousands of passes quickly, but not with flatbed lasers like the Speedy series.
@@TrotecLaserCanada Hi. I’m here for a school project.
With aluminium could you just use 2d design to make fancy details? I don’t necessarily need to cut through it, just make detailed prints.
The design is either going to be a circle,
12cm by 12cm, 1cm thick, made of Matte grey stainless steel
Or
Grey bushed aluminium alloy of something.
I don’t know how to cut a metal circle 1cm thick 🤷♂️
Why go through the time and expense of inlaying magnets when your laser can cut rubberized magnet sheet that comes with an adhesive backing to the exact profile of the acrylic? I cut 1.6mm thick rubberized magnet with a 10W diode laser @ 100% power and 4mm/sec. One pass will cut through cleanly.
how long did that take to laser cut ?
Under 10 seconds for each piece.
Where can I find those magnets in the US? Thanks!
Hi Troy, you would have to ask our Trotec US office if they sell them there. Thanks!
Super Strong Magnetic ID Badge Holder. You can find them on Ebay or Amazon but I would go the China route and buy them wholesale in bulk cheap!!
how can i buy this laser cut?
Hi there, which country are you located in?
@@TrotecLaserCanada from Mongolia
@@dotamuugi9811 Try our contacts in China:
Trodat Marking Xiamen Co., Ltd.
Guannan Road
361006 Xiamen, fujian
HONG KONG
Tel: +86-02-592-6020002
E-Mail: Celia.Lin@trodat.net
www.troteclaser.com