Welcome to the Disrespected $2,000 Modified Car Challenge. Limited editing, no music and no voiceover. Hang with us and let us know what challenges the cars should go through?
I watched an ignition hotspots DVD last night these fits that scene these cars vs the ones of the era compare the cars with some judges Both of these are 90’s Japanese cars how about comparing them out in the blue mountains (it would be less of a test more of a fun comparison due to legalities)
Biggest "issue" with modified cars is the reliability so surely there needs to be a road trip! 90's backpackers challenge to Byron Bay....Make it happen
@@Shyzah Uhhhh I’ve been to theToto display center in Tokyo. We searched it out as a destination on a trip one time. 2 floors of low & high tech bathroom & toilet wizardry. Disneyland for toilet enthusiasts.
As for the "dont grease the sparkplugs" discussion. For me that is a must. Most modern cars have aluminum heads, and most sparkplugs use carbon steel threads. Over time and intense heat that combination can literally fuse and corrode together. A little dab of anti seize on each thread will ensure those plugs will come out every single time. In my 25 years of maintaining and building my own vehicles i have never seen a single issue come from it. But i have purchased cars that needed the head drilled and tapped because it wasnt done.
Exactly... Bought a used head. Spark plugs needed quite a bit force to get out ... one came clean with the threads, ripping a tunnel in the head. because someone didnt use a dab of copper / alu paste.
Modern spark plugs have a transparent coating on the threads designed specifically to avoid this. Any issue that may arise comes from people who overtightened the plugs
I think it comes to personal opinion. I have always used just a tiny bit of anti seize on my plugs for my alloy heads, and I have gone three years without taking plugs out, and never had an issue. It comes down to not over tightening as well.
Since they will both expire at some point during the challenges I suggest: 1) Push me race - who can push their car 100 metres the fastest 2) Followed by the - Now you're knackered change a tyre fastest challenge using the jack and wheel brace that came with the car 3) Finally the - two sweaty blokes race their cars two laps of a track fastest wins challenge 4) Probably (not) optional - the who can get the tow truck first challenge!
Great work with this vid, exactly the kind of, "Hangin' with the boys" content we love! Also, realizing there are kids who grew up on your videos, nothing adds grey hair faster! :D
I love how they are just changing editing style and saying limited editing. One of the things this channel so good is how they wink into the camera and wait to see who catches on. MCM has and continues to have Phenomenal editing, music, and voice work.
The Chicken free hand! Eat chicken see how far the car goes straight before turning. NO TOUCHING THE WHEEL! Added eating the entire piece of chicken for bonus points.
7.45 in and before you even mentioned leaking with excitement, I was already so excited for this episode that you would never imagine. I love both of these cars so much and can’t wait to see how much fun you have with this series 😁
@@TravsWorld69 Very underrated! They're great cars especially when considering you can still pick them up for reasonable money in comparison to many other old Japanese nuggets nowadays
Or just, no beating around the bush, fastest one around the track after a warm-up lap or two no egress no into no straight line no parking lot skidding with trolleys under rear wheels. Just, fastest, around, the, track.
The obvious challenge is called “high speed speed-bump” where you drive your car over a speed-bump at 50 miles per hour. And then check the cars for damage. The least damage wins. Recommend doing this challenge last.
90's Sydney!!..Tumbleweed is in order at the Landsdowne..followed by a wobbly walk up King st to the Bank with giggles and a strawberry daiquiri and down Enmore Rd with a kabab...beautiful!
I was shown the hose trick by an old mechanic many years ago who always used a garden hose to hold and start the threading when installing spark plugs without the danger of cross threading them. Nice and simple. Any bit of garden hose will do as long as it holds the spark plugs.
I’ve been watching since I was 9 or 10 and I’m 21 now. You guys gave me my start to doing crazy stuff with my moms car. I remember putting a push start button in my moms car when I was like 12 because of you, she loved it though. Gonna start my own channel when I get it figured out
Challenge: who can “cop” the best lean on to their car. Because “something that everyone happens to know is it’s not about how you lean on your car. It’s about how you race your car.”
I'm so glad I found you guys in 2012. Great content as always I love the new style of your videos. So much more personal and detailed. But dont get me wrong I love moogs music and cuts as well haha
"Unlock the Power of Your Tool" Yeah that should definitely be Ryobi's next ad blitz. It will be huge. An enormous campaign. The market will swell enormously. Garage banners with that motto will fly off the shelf.....
Moog's cream white and gold impact driver is ricier than spiked lugs. Ricier than an eBay wing, chopped and welded struts, or a mickey mouse exhaust. Ricier than an American with a lowered Honda ordering shrimp fried rice. Ricier than than a catch can, intake, fart cannon, and a tacho on your 93 civic. But I love it.
If the Sera is a 1.5L than its not the engine from the turbo Starlet, but its own original 5efe engine. Starlet engines were 1.3L 4efte, however most of the parts are interchangable. Many people take the turbo setup and cylinder head from the Starlet and bolt it onto the 1.5L engine, to sort of create a 4e/5e hybrid engine that has the best features from both engines.
"Covered in fluids, and not in a good way..." We've all been there. About torque settings for lubricated bolts... Check out John Cadogan from Auto Expert on youtube, he's got a full video on exactly this. He's a mechanical engineer by trade, knows his stuff. In essence though, if you lightly lubricate pretty much any bolt, reduce the specified torque required by 30 percent. All good to keep greasing your plugs, Moog :)
I still wouldnt ever grease the plugs, because it's very important to be able to transfer heat into the cylinder head which the grease only reduces by a lot
@@Ronnaferd most head bolt torques are correct for lubricated bolts. Normally it's just with engine oil, but some will be with a moly lube or similar. Pays to check when doing them what the lubricant should be
I use to have a GMH fridge. Heavy as crap but had the Holden insignia on the handle. Great fridge but the freezer door hinge broke after 35 years. Loved that fridge.
Watched this vid and didn't have better to do on a Sunday night so I went back and started watching the Season 5 playlist. You guys should bring back THAT theme song! Rockin'est one you ever had!
Sera came with 5E-FE which is a 1.5 litre N/A SOHC engine but this particular one was swapped with a 4E-FTE which is a 1.3 litre Turbocharged engine from a Starlet GT I suppose.
29:25 I'm as old as these blokes and everything about Vaults and Tempe tyres is so on point. Brings back memories of just hanging out at Tempe Tyres and seeing fully sick rides. Almost everyone in Western Sydney had these rims lol
It's OK. I wasn't a fan of the later model 200SX wheels it had on it. Now if it had had the correct original wheels, then I would have been disappointed.
Been using a high temp copper based anti-seize on any aluminium head. Just on halve closest to the outside. Enables a proper wet torque in the aluminium head. Plugs will still come out years later.
Autosalon challenges, 90s styling, sound off (sound system and engine), dyno run, drag run and the most important the UV blacklight challenge to see how much cream has been spilt in these pants droppers haha
Challenge: seeing as these cars are meant to be show cars, see who can put on the best show, whether that is coming through a cloud of smoke doing a j- turn with McDonald trays under your rear tires or doing a drift with your gull wing doors open. You have 1 or so minutes to pull it off.
For spark plugs I use two different greases for the top and bottom threads, tighten them with an extension until they’re snug but not forced in and then clean up. No issues so far
Is it just me or does Moog look like he's been lifting? Always great to watch these! It's hard to believe how long we've been watching these legends wrenching on cars.
Yall DEFINITELY need to do an off-road challenge with these two beauts! Not like rock crawlinf of course but more like rallying type of stuff. That would be AWESOME!
AND NOW THE CHALLENGES: 1. Style ( afcourse)👍 2. Power output ( on the Dyno)👍 3. Fastest track time👍 4. 1/4 Mile drag race👍 5. Top speed challenge ( I think these would be interesting)👍 6. Fastest KFC food order pick up ( sorry Martin)😅 7. Spectator wow factor ( bring the car to a car meeting and let the spectators decided)🤣 9. Girl pick up challenge (in which car would the girls rather be picked up and you know that's an important factor, do I need to say more)🤫 9. And finally best exhaust sound (again sorry Martin)🤣 10. These point don't matter, because you already have the proper challenges from me.🤣 10. JUST DO IT 😎
Welcome to the Disrespected $2,000 Modified Car Challenge. Limited editing, no music and no voiceover. Hang with us and let us know what challenges the cars should go through?
Yes boissss
Fastest lap (circuit) fastest 1/4mile, and ya gotta do the trays under the back wheels drift in the car park thing again. Lol.
I watched an ignition hotspots DVD last night these fits that scene
these cars vs the ones of the era compare the cars with some judges
Both of these are 90’s Japanese cars how about comparing them out in the blue mountains (it would be less of a test more of a fun comparison due to legalities)
Drag
Road Course
Car meet peoples choice
Dyno Queen
Budget spent...
run them on oil
Blacklight challenge to see which one has the most “cream” stains
On a quiet Friday night faping over Facebook marketplace.
Lol that’s disturbing...... it I wouldn’t be able to look away Lol
Creme de Challenge
Challenge - highest trade in offer at a BMW dealership 🥳
$50 LoL
Please
There like, I'll give ya an extra key fob?
Try for a used 335i auto or 6mt would be funny or fast car for channel
@@TheG60528XiJinPing their new digital fobs cost more than these cars 😂
Biggest "issue" with modified cars is the reliability so surely there needs to be a road trip! 90's backpackers challenge to Byron Bay....Make it happen
Byron Bay, home of the homies in Parkway Drive!
Challenge:
Who can out run a 1990s police car on the track!
mitsi v3000!!!
On the highway would be more interesting
VN BT1 5L
Mitsubishi cordia turbo hwp
I think they are gonna have a hard time out running them. Them police cars are chipped
Challenge: Period correct outfits/sound system/music.
Lol can't imagine how slow with a few hundred lbs of speakers/deadening in it.
I could never live with a
I second this
Yes, please!
Fact!!
And clothing
Challenge: Have fridge enthusiasts rate your cars.
The fridge enthusiast thing is real. Jump on any off-grid solar forum and search info on fridge efficiency and modification.
@@DiscoFang then theres old fridge hoarders... and uh... toilet enthusiasts exist too fyi!
@@Shyzah Uhhhh I’ve been to theToto display center in Tokyo. We searched it out as a destination on a trip one time. 2 floors of low & high tech bathroom & toilet wizardry. Disneyland for toilet enthusiasts.
"This spark plugs has an electrode, do you reckon a sex robot has an elechode?"
Marty asking the real questions that matter...
Jonathan Garneau-Reid The look on Moog's face was priceless.
I could almost hear the cogs whirring in Moogs head after Marty said that :)
He’s asking for a mate
@@dt-hi6bg Cheryl?
As for the "dont grease the sparkplugs" discussion. For me that is a must. Most modern cars have aluminum heads, and most sparkplugs use carbon steel threads. Over time and intense heat that combination can literally fuse and corrode together. A little dab of anti seize on each thread will ensure those plugs will come out every single time. In my 25 years of maintaining and building my own vehicles i have never seen a single issue come from it. But i have purchased cars that needed the head drilled and tapped because it wasnt done.
Exactly...
Bought a used head. Spark plugs needed quite a bit force to get out ... one came clean with the threads, ripping a tunnel in the head. because someone didnt use a dab of copper / alu paste.
Modern spark plugs have a transparent coating on the threads designed specifically to avoid this. Any issue that may arise comes from people who overtightened the plugs
I think it comes to personal opinion. I have always used just a tiny bit of anti seize on my plugs for my alloy heads, and I have gone three years without taking plugs out, and never had an issue. It comes down to not over tightening as well.
I laughed way harder at Elect-Chode than I probably should have.
dude same i was crying!
I had pause the episode. 😂😂😂😂
The look on Moog's face was pure gold
I'm English... What's a chode?
@@koitorob Wood. Hardon. Erection.
Since they will both expire at some point during the challenges I suggest:
1) Push me race - who can push their car 100 metres the fastest
2) Followed by the - Now you're knackered change a tyre fastest challenge using the jack and wheel brace that came with the car
3) Finally the - two sweaty blokes race their cars two laps of a track fastest wins challenge
4) Probably (not) optional - the who can get the tow truck first challenge!
In sequence, no rest time. Or maybe just a total time.
@@samiraperi467 That's pure evil entertainment right there :D
Great work with this vid, exactly the kind of, "Hangin' with the boys" content we love! Also, realizing there are kids who grew up on your videos, nothing adds grey hair faster! :D
"this means limited editing, no music and no voiceover. We hope you like it! "
loved it
Still got plenty of TH-cam ads tho
I love how they are just changing editing style and saying limited editing. One of the things this channel so good is how they wink into the camera and wait to see who catches on. MCM has and continues to have Phenomenal editing, music, and voice work.
“We’re going to Super Cheap Auto to buy all the bits we need”. And that’s how you know that this is a legit challenge 😂.
yessss
Man i asked for king pin bearings for my hilux and they had to get the manager.... the manager was also my mate haha
Challenge: Proper old school 90s "Cover Car" shot for that SexSpec show and shine
The Chicken free hand! Eat chicken see how far the car goes straight before turning. NO TOUCHING THE WHEEL!
Added eating the entire piece of chicken for bonus points.
@@Mainroad.Manjis101 tofu flavored chicken
Head-turner challenge: Go for a normal drive and see how many people turn their heads to look at your car.
THIS ^^
Marty has no rego
@@Ryncewind0 f in chat
@@Ryncewind0 I guess an alternative would be bringing them on a track day?
23:35 that's one way to get Moog to shut up. One of the very few times I've seen him speechless.
Yeah, that look made me LOL
I texted that to my friend and I got a "WTF!" BACK
"11 o'clock at night and covered in fluids."
Sounds like a good time to me.
Just stepped out of the shower after wrenching all day. Super stoked to see an unexpected MCM video in the queue.
Depends on the fluids
Marty looking like he is trying to fix a water leak in a submarine to save the crew
23:36 That's the Moog we all know and love. To keep a straight face of disapproval at Marty's hilarious and completely random comment hahahaha!
Challenge: With all that glass surrounding the cabin, I want to know which one gets hottest inside when parked in the sun for 30min.
No more han a 90s car with a sunroof. Both models have covers for the roof section to avoid excesive heat inside.
“We’re just fixing someone else’s shit”. That about sums it up, fun as it is to watch.
7.45 in and before you even mentioned leaking with excitement, I was already so excited for this episode that you would never imagine.
I love both of these cars so much and can’t wait to see how much fun you have with this series 😁
I'll buy that NISMO oil cap for my S12 Silvia. The condition of the cap matches the rest of the car 😂
I always forget the s12 existed I've never seen one in person either.
Wow, is it one of these⁉️ drivetribe.com/p/the-silvia-story-brvEzZnGTSidOdk_1RUEQw?iid=DJYa8cVNS5-3Eo7QMTl6Qw
Damn S12 is a rare car my favourite s chassis!
@@rheser Yea, mine is a hatchback and I will be installing a VG30DET!
@@TravsWorld69 Very underrated! They're great cars especially when considering you can still pick them up for reasonable money in comparison to many other old Japanese nuggets nowadays
Attention Challenge: go down to a busy part of Sydney. Whoever gets the most looks or photos taken WINS
Yes!, this is a topgear classic
wenzo2541 I was thinking they could do a cruise along George St, except you can't any more.
It's Sydney no one is going to care, everyone has their heads in their phones.
Would be an easy win for the Sera though, it's a rare import and has gullwing doors. When's the last time you stopped to admire an NX?
Top gear 🤔
Moog's reaction to Marty's elecchode comment is the greatest MCM moment in the history of their videos.
Moog: "These are some Volt ... chrome wheels."
Enkei G-Zero has left the chat.
chrisrnz they should have been three-spoke alloys for that true ‘90s feel.
The wheels are so bad ....😂😂😂😂
@@joeismissing awhh man fuk those wheels lol
Vaults and g zeros.... man, the best and worst of the era.
I was expecting gold 3-spokes
Challenge: Dukes of hazard, which car is easier to get into through the window
If one catches fire... the egress challenge!
Or just, no beating around the bush, fastest one around the track after a warm-up lap or two no egress no into no straight line no parking lot skidding with trolleys under rear wheels.
Just, fastest, around, the, track.
Like your way of thinking, but I don't think Marty is getting through his windows
The look on Moog's face after Marty said "electrode" was correct. That's exactly what you do when that is said.
He said elecchode.
The MCM sarcasm is so good and I don't know enough about cars to know when they're being serious or sarcastic.
The obvious challenge is called “high speed speed-bump” where you drive your car over a speed-bump at 50 miles per hour. And then check the cars for damage. The least damage wins. Recommend doing this challenge last.
Just watched an old episode. . . Moog that smile on your face when u smoke the falcon with the 1jz cres. Priceless!!!!!
Challenge - Sketchiest Top Speed
Challenge - Most 90's Smell
Challenge - Which car's speedo reads closest to reality after the aftermarket wheels are slapped on.
"Eat some slop, straight from the clown"
thank you! I was like... WHATTTT????
90's Sydney!!..Tumbleweed is in order at the Landsdowne..followed by a wobbly walk up King st to the Bank with giggles and a strawberry daiquiri and down Enmore Rd with a kabab...beautiful!
That is probably the greatest shopping montage in the history of anything, anywhere.
Those wheels fill me with complex emotions though!
Challenge: Maccas tray burnouts required.
Iconic p plater activities of the sex spec era.
I was going to say this too.
Didn't they do that for 2sexy Vs Saab?
Didn't they do that for 2sexy Vs Saab?
Beat me too it too so thumbs up from me
I was shown the hose trick by an old mechanic many years ago who always used a garden hose to hold and start the threading when installing spark plugs without the danger of cross threading them. Nice and simple. Any bit of garden hose will do as long as it holds the spark plugs.
23:36 that dead silents after him making that joke then proceeded with the ratchet was too funny
Sitting in the Macca’s drivethrough temp challenge.
Martins car doesn’t have rego lol
You can mockup a drive through
I’ve been watching since I was 9 or 10 and I’m 21 now. You guys gave me my start to doing crazy stuff with my moms car. I remember putting a push start button in my moms car when I was like 12 because of you, she loved it though. Gonna start my own channel when I get it figured out
I'd read Moog's book in a heartbeat.
To paraphrase Gen Patton: Moog you magnificent bastard, I'd read your book!
or an audiobook of his book read by the man himself!
Challenges:
0-100-0
Scrape challenge on steep driveway or speedhump
Chapel st spec burnout
Show car Comp
Track day challenge
I don't think they'd make it to Chapel St from Sydney.
perf, pin this guys
Haha the Chapel Street spec burnout is amazing, although it is pretty calm these days (even before the Rona).
Lygon Street spec burnout would suit it hahaha
dude... 0-200-0*
"you will be covered in fluids and not in a good way" 😂😂😂😂😂😂
Moog: oils up the spark plug threads.
Also Moog: doesn't oil up the o-ring on the oil filter.
I think he got some oil from the old filter at 22:14 and put it on.
Lol
Or check the gap on spark plugs. I know they come pre gapped, but it's a good Idea just to double check with a feeler gauge.
they talked about this once with tuning fork, and determioned that actual mechanics are split 50/50 on the necessity
@@tyrelirwin What do you think about dielectric grease on the plugs?
16:05 when you realise Moog is over 40 WHHHATTTT
How do you not know before? Look at the era they buy cars from. That tells you their age immediately.
Woah he doesnt look anywhere near 40 imo i thought he was 30+ at most
The grey hair was a clue
They're aging like fine wine lolll
RECKLESS DEEP AIR hahaha. Nah, but he is 42.
Challenge: who can “cop” the best lean on to their car. Because “something that everyone happens to know is it’s not about how you lean on your car. It’s about how you race your car.”
Who can do the fastest lap in reverse challenge!
Challenge: who can stay in their own car the longest
This!!
I strongly support this suggestion!
With the heaters on full blast... no real winner.. but the first to leave their car loses a bit more :p
Without cleaning it. Also gotta taste the human slime.
As long you're not with Spenny, everything would be alright.
This might be the most enjoyable video they have made; the pacing and dialogue in this is really nice.
Challenge - wrong wheel drive drag race: a drag race in reverse gear.
Lol let's make this challenge second to last, followed only by the speed bump one hahahaha
J-turn challenge!
Moog I love your extensive collection of Eddie shirts. I've only got 3, and thought that was pretty good... nothing compared to you!
I'm so glad I found you guys in 2012. Great content as always
I love the new style of your videos. So much more personal and detailed. But dont get me wrong I love moogs music and cuts as well haha
Marty, I will purchase your old wheels in exchange for me MOWING YOUR LAWN EVERY SINGLE WEEKEND for the next two weeks, but I can’t do this weekend.
3:27 "First thing ... go and get some supplies."
Did you forget about jacking up your car?!
Challenge: Most laps in the shortest time travelled on 5L of fuel
3:54 "Nobody knows that they saw it, but they did."
Even a hummingbird couldn't catch Moog at work.
@@fuzz992 you beat me to it my friend.
I do that with all my funnels! Lol
“Someone’s put alot of cream in the front of that”😂😂💀
"Unlock the Power of Your Tool"
Yeah that should definitely be Ryobi's next ad blitz.
It will be huge.
An enormous campaign.
The market will swell enormously.
Garage banners with that motto will fly off the shelf.....
The starlet engine is a 4EFTE and it's not 1.5l it's infact 1.3l.
I’m almost sure marty’s sera is a turbo 5efhe. 5efhe has a strong bottom end so no need to swap to 4efte. Should do 200hp easely
Can confirm. I daily a 5EFE(not fhe) and the bottom end is really strong. My Corolla zips past everyone in the city.
Yeah the early 5efe had stronger rods. Later models wont do well with turbo.
Gotta know. After watching you guys for over 10 years now, never asked the question, who is the hero camera man/woman for the recent years!
I'd like to know too....
RAKE
Moog's cream white and gold impact driver is ricier than spiked lugs. Ricier than an eBay wing, chopped and welded struts, or a mickey mouse exhaust. Ricier than an American with a lowered Honda ordering shrimp fried rice. Ricier than than a catch can, intake, fart cannon, and a tacho on your 93 civic. But I love it.
moog hitting me right in the nostalgias when he said "alcatel" OOF
Yeah, low blow
@@earnestbunbury2103 My first mobile was a Nokia 2150 , in 1996 :D
Yooo what happened to alcatel
Where’s Tommyfyeah when you need someone to buy a rare old logo Nismo oil cap?
for $1400😅
Thats a Episode of MCM everybody loves! No fancy cutting and lightning and sound design. Just simple MCM!
Put the oil cap on the 180sx! Perfect spot for it.
Greenest car challenge:
The car that is the most green wins
Rules: Must be old Diesel pre 1980's
Something about this seems like it might be slightly rigged.
Whatever, seems fair to me!
There is currently 69 likes on this comment. I will not click the thumbs up..... but I like this comment.
If the Sera is a 1.5L than its not the engine from the turbo Starlet, but its own original 5efe engine. Starlet engines were 1.3L 4efte, however most of the parts are interchangable. Many people take the turbo setup and cylinder head from the Starlet and bolt it onto the 1.5L engine, to sort of create a 4e/5e hybrid engine that has the best features from both engines.
Challenge: You guys should put macca's trays on the back and see who can hold the biggest sideways drift
aka - the macca's carpark skid
+1 for the plastic tray challenge.
You should do a “pizza delivery challenge” where the winner is the one that delivered the most pizza, did the most tip and break the least.
love the minimal editing/music. reminds me of the civic "build". this is the content i subbed for!
"Covered in fluids, and not in a good way..."
We've all been there.
About torque settings for lubricated bolts... Check out John Cadogan from Auto Expert on youtube, he's got a full video on exactly this. He's a mechanical engineer by trade, knows his stuff.
In essence though, if you lightly lubricate pretty much any bolt, reduce the specified torque required by 30 percent.
All good to keep greasing your plugs, Moog :)
Yeh there was some great info in that video from John, I learnt a bit from it.
30% reduction.....wow. I'm surprised it's that much. Is that the same for head bolts too?
I still wouldnt ever grease the plugs, because it's very important to be able to transfer heat into the cylinder head which the grease only reduces by a lot
Aren't those wheels going to absolutely shag the gear box
@@Ronnaferd most head bolt torques are correct for lubricated bolts. Normally it's just with engine oil, but some will be with a moly lube or similar. Pays to check when doing them what the lubricant should be
It’s 4.06am.. sure what’s an extra 35 minutes and 46 seconds of no sleep!
Imagine not being local to MCM lmao /s
Ahnaf Khan Yes, imagine the entirety of the world’s population not living in the vicinity of Mighty Car Mods..
It’s 1:30pm here
I use to have a GMH fridge. Heavy as crap but had the Holden insignia on the handle. Great fridge but the freezer door hinge broke after 35 years. Loved that fridge.
You’re supposed to anti-seize the plugs, not grease them lol
And if you aren't using a torque wrench and instead feeling the washer crush, it wouldn't matter if it changed the torque.
Most manufacturers recommend torquing your plugs down without anything on them
NGK recommends not using anything on their plugs.
Dugg117 odd. I’ve always seen to use antiseize. My plugs also don’t have crush washers
@@coast2coast00 who uses a torque wrench for plugs,
you just pop them in finger tight and then twist a 1/4 -1/2 a turn...like oil filters
Challenge: Reverse Goto Woe (as fast as they will both go in reverse!)
Watched this vid and didn't have better to do on a Sunday night so I went back and started watching the Season 5 playlist. You guys should bring back THAT theme song! Rockin'est one you ever had!
Then there are guys like me who are 80's kids who watch MCM because we like all car stuff.
Sera came with 5E-FE which is a 1.5 litre N/A SOHC engine but this particular one was swapped with a 4E-FTE which is a 1.3 litre Turbocharged engine from a Starlet GT I suppose.
The 5efe wasnt sohc
From a glanza
@@nzwotb2525 Yerp. Starlet/ Glanza GTT
29:25 I'm as old as these blokes and everything about Vaults and Tempe tyres is so on point. Brings back memories of just hanging out at Tempe Tyres and seeing fully sick rides. Almost everyone in Western Sydney had these rims lol
MCM: oh were you thinking of sleeping? Hahaha awww
Over here in the US they also like their exhaust sounding like someone ripping one on a leather sofa!
I love how marty always has the nuggetiest of all the nuggets that almost always need the most work done to them every challenge they have XD
One of the challenges you should race a tight cornery track with a cup of water in the car ... initialD speck lol
Yes, we need this!
Nx enthusiasts everywhere are crying when you brought out those wheels.
It's OK. I wasn't a fan of the later model 200SX wheels it had on it. Now if it had had the correct original wheels, then I would have been disappointed.
Been using a high temp copper based anti-seize on any aluminium head. Just on halve closest to the outside. Enables a proper wet torque in the aluminium head. Plugs will still come out years later.
I REALLY want to see who can do the best one a single lap with no other drivers on the track so no wheel to wheel racing... AND a proper go to woah!!!
Nothing better than at new MCM video.
What about a used mcm video
Autosalon challenges, 90s styling, sound off (sound system and engine), dyno run, drag run and the most important the UV blacklight challenge to see how much cream has been spilt in these pants droppers haha
Challenge: seeing as these cars are meant to be show cars, see who can put on the best show, whether that is coming through a cloud of smoke doing a j- turn with McDonald trays under your rear tires or doing a drift with your gull wing doors open. You have 1 or so minutes to pull it off.
Challenge: Most "heads turned" while driving a lap of Church Street.
For spark plugs I use two different greases for the top and bottom threads, tighten them with an extension until they’re snug but not forced in and then clean up. No issues so far
WE NEED A CHEAP CAR ROAD TRIP CHALLENGE FROM “MCM”
Wow, if their banter about '94 is true, Moog is like 40 & Marty is in his late 30's, woah!
Welcome to MCM, you must be new. And why would they be lying? lol
In the blink of an eye you'll be 40 too, get ready.
I think Moog is about 6 months older than me, so that would make him 42.
Yeah I heard that too. I've always wondered how old Marty really is, because if you Google his name it pulls up some BS about him being like 45.
I know. I was liek “whaaaaaa Moogs 42”. I need some of those Australian genes.
Is it just me or does Moog look like he's been lifting?
Always great to watch these! It's hard to believe how long we've been watching these legends wrenching on cars.
Subaru owners smoke vapes, Nissan owners smoke bongs.
-MOOG
😂😂😂
Challenge: Who can resell their car for the largest profit.
This is a family show! We don't come to MCM to watch someone get fucked over.
How to keep car prices going up 101
Yall DEFINITELY need to do an off-road challenge with these two beauts! Not like rock crawlinf of course but more like rallying type of stuff. That would be AWESOME!
AND NOW THE CHALLENGES:
1. Style ( afcourse)👍
2. Power output ( on the Dyno)👍
3. Fastest track time👍
4. 1/4 Mile drag race👍
5. Top speed challenge ( I think these would be interesting)👍
6. Fastest KFC food order pick up ( sorry Martin)😅
7. Spectator wow factor ( bring the car to a car meeting and let the spectators decided)🤣
9. Girl pick up challenge (in which car would the girls rather be picked up and you know that's an important factor, do I need to say more)🤫
9. And finally best exhaust sound (again sorry Martin)🤣
10. These point don't matter, because you already have the proper challenges from me.🤣
10. JUST DO IT 😎