How To Install Precut Window Tint - With Gasket In
ฝัง
- เผยแพร่เมื่อ 26 มิ.ย. 2018
- Buy D.I.Y Pre-Cut Window Tinting Kits and Window Tinting Tools Online -
WindowTintSupplies.com
================================
💵 TRAIN ONE-ON-ONE WITH ME - bit.ly/3mPKEfT
================================
🚗 Vehicle Specific Tinting Videos - bit.ly/387yoAD
================================
Sign Up For TintWiz App - www.tintwiz.com (30 Day Trial)
================================
🚨🚨 How To Light Up Your Shop To WOW Your Customers And Take Awesome Pictures - • The Perfect Lighting F... 🚨🚨
![[LIVE] : ONE ลุมพินี 69 | คู่เอก "กุหลาบดำ vs นาบิล"](http://i.ytimg.com/vi/PNM6U8e_HMo/mqdefault.jpg)
![ตีสิบเดย์ [FULL] | ครอบครัวสะท้านทุ่ง "นางบี & อ้ายสติ๊ก"](http://i.ytimg.com/vi/A1rhYcxxNtA/mqdefault.jpg)
Thurough video.
Doesn't over-talk.
Music perfectly set.
Nicely done! Thank you.
Great video. Guy explains everything perfectly and not too much. He is confident and comfortable doing what he does. Step by step directions.
Very nice job explaining everything. Really nice video!
I have watched multiple videos on how to install precut by far this is the absolute best tutorial I've seen yet thanks.
This is one of the best tutorials that I've watched so far. Simple yet really needed techniques. I have had a failed attempt to install on my Passat which got thick gaskets. I hope this will help in my next attempt.
I agree with you. I have seen many videos and this is the best. Simple , clear , professional and easy. Great video 👏🏻
pretty good. just a few tips, if you heat shrink the tint outside on the bottom, and double snap technique, before installing, usually you wont get any fingers on the inside (especially with a gasket in place). i use this technique when i have tight door gaskets or i dont remove the panel. also i pull off all the liner, but make sure the panel is completely clean on the top before tint touches it, this way you will not get those little side creases or fingers. when you pull tint away from glass as you roll window up, you will flush the glass, as you did, and also flush the tint, this will remove any possible contaminates. i use this trick all the time. the only time i dont use it, is with panels that are made of cloth. vinyl panels, are the norm, and i just make sure i clean the panel good. good video !!!
You are by far my favorite tinter to watch. I found bottom loading to be far easier. I tint exactly as you do and would crease maybe 40% of the windows I did, till I started bottom loading and wet shaving the top.
Global works so good for me. Very beginner friendly and budget friendly. Shrinks well and is durable. My dude is back making vids. Been watching him for 5 years
You snapped on this man! Love the clear explanation and confidence. You mentioned things a lot of people don't mention. Appreciate you man!
I've watched many YT videos and you are by far the best at explaining with visuals
I watched like 10 videos on here and yours were by far the most informative. Thanks
Thanks for a great DIY tutorial. You are an excellent instructor!
Clear and concise. Exactly what I needed
Thanks for this! I wasn't sure going into it but with your help I just did my front 2 windows on my truck and it turned out great!
Very clearly demonstrated. Great work.
Probably the best clear cut informative door tint vid out there. Thanks
Excellent video with lots of explaining in details
Dude, great explanation!
Thanks Man ! Great Instructions 👍
This guy is a pro. And instructions is very clear and understanding all the step. Thank you for this priceless video
Best tint instructions by far.,Thank you.
Thank you very much for clear down to point instructions. Looking forward to try on my vehicle. Thanx again :)
Really nice technique and attention to detail 👍
Great Vid your a natural man.
They make it look so easy
excelente trabajo hermano eres un maestro
very well spoken--nice tutorial-----thank you
Excellent tutorial, thank you.
Best video I've found on this subject hands down thx you
Awesome video man really appreciate it. It's because of you and this video I tinted my 05 honda pilot driver and passenger windows. I removed the gaskets just so it up'd my chances of getting it right and man am I glad. The tint gods was good to me on these cause man they turned out great let me tell you. For real though thanks
Thanks for the advice
Very good video best ever for tips on doing a quality job
Nice job. I learned a lot from this video
Out of all the tint videos, this one is the best.
This is guys is the best by far. I am a professional chandelier cleaner. I wanted to point out another important thing not mention here. We all have oily fingers . Before starting, use soap and hot water and a Scotchbrite pad to scrub all the oil off your finger tips and hands. That why you wont accidently leave any finger prints. Whoops! I just think I gave some criminals some tips!, I personally do not like so much water going into my seals or electronics. I have ideas on how to keep the water out of the inside of your dour jam and off the inside of the door buttons. I would consdier using either blue tape and plastics and taping the bottom of the blue tape to the bottom of the window just below where the last piece of tint would, go. I tam thinking the blue tape will not leave residue if only left on for a minute, I could be wrong. Or you Carpet cling plastic, It seem to go on and off with out residue. but I am not sure
great stuff. helped me a lot. still struggle with tiny fingers but your video helped me
Dude is Fresh .
good job
Why does this vid have any thumbs down? Fantiastic video, thanks for sharing your expertise and all the helpful details!
Great video. Thank you
Outstanding tutorial
Awesome video great technics. Thanks for the information
Great Video, Thank you
Great video..!!!
very good, and informative video 👍
Thanks
What I learned is I better leave it to the professionals. I thought maybe I could do this. I have changed my mind!
Side window tint kits are like $12. I'm going to try it and if I mess it up I'm only out 12 bucks!
Update...Wasted $12. Making appointment with tint shop. Lesson learned
@PROJEX HIVE Yes it was. The driver's side I screwed up but the company I bought it from said they will send you another one at a low cost and fast shipping if you mess up so I figured I might as well try the passenger side. It laid down ok but the bottom seal is so tight it took me a long time to get it all tucked in. I kept getting fingers and I couldn't get them to lay down even with a heat gun. I'm ok with paying to get them done just thought I might try it first. I'm actually out like $30 between tint, tools and heat gun.
@PROJEX HIVE That's great! I drive an Infinity FX35 and it has real short windows. Think that was part or all of my problem. Oh well I tried.
GREAT FKN VIDEO, SUPER INFORMATIVE AND I GUARANTEE YOU I CAN DO TINT NOW
What software do you use?
Thanks!
Probably the best "How To" video I've seen on TH-cam. Great instruction. Great video angles and shots, and clear audio. Well done!
Great video Kjng Warrior! What kind of liquid soap and how much per gallon of water do you use ?Thank you !
Could you do a how to tint a front windshield and a rear glass with a windshield wiper that’s in the way
what tint do you use if you dont mind me asking
Can you please do a video installing the rear window on a vehicle similar to a 2014 Jeep Patriot? Ant SUV with a rear lift gate. Thank you.
Can you do a tutorial on installing a precut kit that doesn't have the clear backing on it?
Well spoken pal. You would not be happy with my first try. Thought I was going to be pinched by the police
Excellent video it should have way more views! Needs a better thumbnail maybe?
what heat exactly setting do you put the heat gun at when installing the pre-cut tint?
that would be more of a personal preference between the high and low setting. Whichever is more comfortable for you to work with.
How does the battery not die when tinting?
how necessary is it to go "below" the gasket? When i tont my own cars, i remove the window completely and tint 2" below the lower gaskets.
Gronk installs tint?
🤣🤣🤣 I was thinking the same thing
Gronk can do anything!
Hello, need some guidance .I have got my car tinted to 35% with
Lumar ceramic tint , but the tint installer said he can’t tint the rear windows as they are factory tinted already (around 40 %) and any kind of tint on them will make them illegal. Is there a way I can match them with my front windows. Because now front windows look little darker then rear. Thanks
i get it perfect but sooner or later the rubber bottom window gasket catches the tint and pulls it off.
i heat the tint etc etc a few times over a few days and this always happens sooner or later.
should i leave a tad more gap at the top edge to have the tint a tad lower slightly below the rubber window seal..
(the inside rubber seal at the bottom of the window, that looks like the rubber blade on a squeegee)
Below the gasket is always preferred as there is less chances of peeling. Best method is removing the inner gasket and dropping it 1/2” below where the gasket would line up
What brand and line of film are you using?
Jimmy Johnson Suntek Standard-Pro
legend has it he is still cleaning the blade to avoid contaminants.
You are not wrong at all 🤘🏼
Do you have to shrink pre cut tint?
It depends, some sellers can preshrink. If the glass is pretty flat no need to shrink if it curved you'll need to to have a clean install and avoid many possible issues.
Bad thing is when I had mine done is they left the door panels wet & it was stained from the solution not to mention the electrical switch's get soaked
Do you sand lidco grey cards??? 500 grit...???
as in the grey lidco card? we personally just use a new card. Although you can sand hard cards with 2000 grit sand paper to keep a nice and smooth edge to prevent any fine scratching during install.
you can start with 500 if the card is really beat up but ultimately you want to achieve a 2000 grit finish.
@@WindowTintWarriors ok ok thanks do u have to sand when they are new ??? Im using blue ones now.....that look like grey..
@@JBIRD575 you shouldn't have to. what are you using it for specifically
@@JBIRD575 the blue lidco cards to my knowledge are polyurethane. The Grey Lidco card is nylon giving it a smoother and softer feel reducing the scratching of window film. i would not recommend using the blue card on the tint side but can be used on the liner side for shrinking.
aren`t you suppose to shrink the tint prior to installing it? so doesn`t have fingers.
So you don't heat shrink it before you install?
Yes shrink before on outside...
@@JBIRD575 I don't think I seen him do that process.
@@RigginTheRod010 watch other videos they do it....
@@JBIRD575 i know this is the first video I've seen that didn't shrink it. Guess the window didn't require it
@@RigginTheRod010 maybe but he still fighting bubbles I think he forgot or was thinking people didnt have a heat gun...
1st time tinting my car. I totally messed up at the end when I needed to put the tiny underneath the gasket. Not taking any chance I will remove it this time.
Dude come do mine lol : )
The way you say 'thumb" is funny....sounds like you're saying dumb! lol
Did any of that squeegeed water go inside the door?? That’s risking the chances of electronics being damaged!
Yes it goes directly into the door. It is safe. It is the same area rain water goes. There is a drain hole in the bottom of every car door for this reason. Water does not get into the area where the electrical components are.
this guy from philly
I fucked up 1 and got 2 sure is stressful
Trucks are easy to tint even the new ones coming out the newer model sedans lately have been so tight is extremely difficult to tint with out removing the seal shit sucks ass!!!!!
You can lightly trim the seal or use a suction cup on the window which works.
@@gav6808 trim the seal?? That’s causing damage and what do u mean a suction cup
looks easy when a pro does it, a different story when DIYers try it, prepare for lots of cursing and messups
wooter bubbbos...lol
And wallah! Your power windows no longer work because you have just soaked your circuitry!
No
Great video. Guy explains everything perfectly and not too much. He is confident and comfortable doing what he does. Step by step directions.