ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Hey TH-cam Fam, I hope you are all doing well.
I purchased this FTX carnage and upgraded it to a brushless system.
It did have a brushed motor in it , but it only lasted 10 minutes , so the upgrade was needed.
Don’t forget to like 👍🏼 and subscribe and feel free to ask any questions in the comment section
Link to motor and esc:
AU $9.68 30％ Off | Waterproof 9T 4370KV 10T 3930KV 3650 3900KV 4300KV 5200KV Brushless Motor 60A ESC Programmer Card Set for 1:10 1/10 RC Car Truck
a.aliexpress.c...
Very nice man!🤙
It's got some speed and pick-up, try for your first 💯kph car🤔
And you don't know how write you are with that grease, it just sticks to the walls of the diff from the centrifical force unless you fill it completely, but diff oil even 1,000,000w was designed to runs over the gears continuously, never sticks and stays in the one spot👌
Yeah I think I might make this my speed car. I’m pretty impressed on how fast it actually goes with this motor set up. Plus I still have that bigger pinion gear I can put on , but I don’t want to stress out the motor too much or I’ll just get a bigger motor. And yeah 100% about that diff oil that’s for sure . I thought I’d get onto it straight away. But still spewin about that chipped tooth on the spur gear.😩😩
@@angesrcs Yeah I personally I would run that motor with max 18t pinion, if it was 3670 3500kv I'd run like 24t max on 3s.
And I wouldn't worry too much about the chipped tooth, my HSP Breaker is running with chipped teeth, has for ages!
👌👍
@@rccrazy yeah sweet as. I keep that in mind. Thanks mate.👍🏼👍🏼🚗
I think you meant centrifugal force!
@@SpeccyMan spell check mate, but I do pronounce it wrong😅
I did this to my Carnage. I used the same kit but I chose the 5200kv motor. Its really good, but its killing spur gears. I've ordered new gears but im getting the 48pitch conversion gears so I can use all my spare 48 pitch pinions. If that fails I will change to the stainless steel spur gear thats on ebay. I gotta say with the 5200kv motor the thing is nuts. I had to go for a Dumborc controller and reciever with a gyro to keep it straight.
Cheers
Simon
S.Aust
Wow, that's really fast.
I was surprised myself after the brushless upgrade. I’m looking to go even faster and make it my speed car
Cool run man👍 I have the VRX Sword XXX it's the same thing as the Carnage but mine has a aluminum chassis and a truggy style wing just like the one on your VRX Cobra :) Liked and Subbed
Cheers, thanks for watching and the sub. 👍🏼. Yeah the VRX sword is a nice car to drive. Would be nice if I had a alluminium chassis. But I’ll stick to plastic for now
Nice dude. I'm ordering new parts for mine. I landed wrong on a ramp and the front part of my chassis broke. Gonna order an aluminium one next time it breaks. Hopefully I'll have my new motor by then
Yeah it’s best to get the aluminium upgrade front chassis. Also try and make a support bracket also like I have in the cobra. It will help when landing on the nose. And also see if you can order a front bumper. That will help out heaps. A 4000 KV motor would be more than enough for this little car because it’s super light
I have the same car so definitely gonna do the same
Great video. I currently rebuild my fTX carnage but don’t knw what brushless motor to put o it. I want speed. I think your setup is great
Hey, thanks for watching. I think a 3500kv motor and esc from banggood or eBay will be more than enough for this car. Because it’s already light, it goes super quick with the setup I have. 👍🏼🚗
I have found a dollatek waterproof F540 3300KV brushless motor+60A ESC
Is this the same or just as good for my carnage 2.0 ?
Hello man this is old video, but i need to ask something, you say its similar to hsp, what models do you know?
I am trying to figure the cars similar to this so o can choose the cheapest parts and i see hsp sells cheaper, so i would love to know. Thanks for the informative videos.
Hi nice, can you please post the link for the kit again as it is expired, many thanks
Ok I’ll see if I can find it or something similar👍🏼🚗
Does the KV really matter if you’re able to change pinions? I got a s3650 3500KV brushless-sensorless. It runs 60 plus mph all day long on a tt02 chassis running 2s lipo.
You can I’m not arguing that you can’t. But you need to put a few factors in is that surprisingly it runs all day but how is the temperature? The bigger the pinion the more hotter the motor will get so it’s better to lower the KV. If you were to run 3S I would recommend getting a 3660 motor with the same KV rating.
Just upgraded mine but stuttars on start and not much torque any ideas plz
What kind of motor and wax did you install
Can tell me how to remove the ESC box?
I hear you say you used a drop of silicone to seal it in. Does that mean it’s just stuck down. Looking to up grade to an aluminium chassis
Yes. I just used a drop of silicone on the surface just to hold it down. I tried a few double sided tape products. But found they just keep on coming off. So the silicone was the best. Just need a drop, about the size of a pea.
@@angesrcsvelcro is the winner here.
Just out of curiosity, how did you get on with that over time.?
Specifically the diffs.?
Stay safe out there mate & best wishes from Scotland 🏴 🙏 ❤️ 📻 🕹️ 🔋 🏎️ 🚓 🚔 🚖 🚗.
Hey Alan, the car has been running great, had no major issues with diffs at all. Even with the upgraded tyres in its last bash video. For me it’s been a very reliable car. 👍🏼🚗. Stay safe too 😃
They diffs are steel. Only issue is the plastic hex hubs. They need upgrading and wheels could be better. My rears eventually stuffed up from to much torque.
@@daveperryLXXVII yes, the bonus is the steel diffs. 👍🏼. And for sure upgrade to metal hexes. The plastic ones are rubbish and for sure tear up the hub on the wheel.
Need some help please, iam new to RC cars.
I have a brushless ftx carnage and my son tried to connect the charging cable from the battery into the visible ports of the receiver (etronix pulse 3 channel receiver). Channel 1 and 2 is used. From what I can see channel 3 which is still available is where he's tried to connect. Silly thing, it wasn't starting so he saw what looked like a male and female connection and tried connecting. There was a spark and some smoke. What has he fried? The receiver? I just bought a new battery but still not working. Appreciate any advice
Yeah sounds like you shorted out the receiver. I’m still trying to understand. How did you plug the wires in from the charger directly into the receiver how was that possible? Looks like you will need to buy a new receiver.
Hard to explain without the ability to post a pic. He has tried to connect the charging cable from the battery to the receiver. I've since learnt that this part of the receiver is for binding a new remote or receiver. There was a spark and smoke coming out of receiver
@@ehsanhaidary9766 just email me. My email is on my page
@angesrcs email sent. Thanks for your help Ange. Subscribed :)
Hi. The link to the motor and ESC has expired. Any idea what would be a good alternative please?
Hi Paul if you’re looking for something that would just be reasonably good you could try this motor and ESC from Banggood I have something similar in my car and it’s been good.
[AU$54.14 18% OFF]Surpass Hobby Waterproof F540 V2 Sensorless Brushless Motor with 60A ESC for 1/10 RC Vehicles RC Parts from Toys Hobbies and Robot on banggood banggood.onelink.me/zMT7/3wqgj3a3
How fast do you think the car was going full speed compared to the brushed motor? Thanks
Hey Katrina, I didn’t really get the chance to test it with a brushed motor as it only lasted about 10mjn, but from what I recall, I’d say around the 45km mark. Thanks for watching. 👍🏼🚗
Great video, question - my Carnage brushed runs on NiMh batteries, will this upgrade kit work with those batteries or do I need to convert to Li-Po?
It will still work it just won’t be as fast as running Lipo batteries
PLEASE CAN YOU GELL ME THE NAME OF THE MOTOR AND ESC
Here you go.
The original link and part has expired, but this is the closest I could find for you. 👍🏼🚗
Just found this amazing item on AliExpress. Check it out! AU$75.39 41％ Off | SURPASS HOBBY KK Waterproof Combo 3660 2600KV 3500KV Brushless Motor w//Heat Sink 60A / 80A Brushless ESC for RC 1/8 Car
a.aliexpress.com/_mPqll8m
Please can you tell me where I can get the brushless upgrade ESC and motor from ? & how much can I expect to pay ? Thank you 👍
Hey Simon thanks for watching. I purchased the motor and ESC from Ali express. I think by memory it cost around $65-$70. If you are going to buy a good motor, I do suggest purchasing the surpass platinum motors. I have done some research and found that they are very close to their KV rating. 👍🏼🚗
What battery did you run with the upgraded brushless esc and 3650 motor?
Hey Andrew, I ran a 4500 3S battery.
Can you run a 3s with no upgrades on a brushless carnage?
Yes you can. It will run so much better than a brushed system. You can still run the original pinion too!
@@angesrcs your a life saver thank you sooo much you earned a sub
@@angesrcs what mah 3s would you go for
@@joshgolding1312 haha. All good, thanks for the sub. Just remember your diffs will Spin faster so maybe check the grease/oil levels in them. 👍🏼🚗
@@angesrcs will di
Where’s that link in the description bro? Help a brother out! Aha
Here it is. Sorry, didn’t realise.
I forgot to add it in the description.
AU $9.68 30％ Off | Waterproof 9T 4370KV 10T 3930KV 3650 3900KV 4300KV 5200KV Brushless Motor 60A ESC Programmer Card Set for 1:10 1/10 RC Car Truck
a.aliexpress.com/_mMv3Ox8
Hay can you use a different battery but lipo or has a brushless motor got to have a lipo battery and can I have a link to to motor and the esc thanks
I’m pretty sure you can run a NIMH battery in a brushless system , but you can’t run a Lipo battery in a brushed system unless the ESC has selectable option pins
@@angesrcs okay I’m on about putting a Brushless system in the carnage 2.0 are C car but I need to know a good brushless system to put in something that’s going to make it go quick pinion gear I wouldn’t know which important and I’m putting in at 26 teeth pinion gear as you recommended but I need a good recommendation on a brushless system which is CESC and the motor so if you can help me on this please I’ll appreciate it cheers mate
@@angesrcs thanks that helped a lot I’m going to run F540-V2 4370KV Brushless Sensorless Motor 3.175mm 60A ESC For 1/10 RC Car in it and if a motor and ESC setup says for tv car drift can you use it off-road
@@kaipoole6042 Yeah that will be fine you can use that motor and ESC set up. And with a 26 tooth pinion that will go pretty hard you might have to buy a wheelie bar.👍🏼😃
@@angesrcs thanks for the advice it helps a lot as I’m getting g into to the hobby I’m loving it but just the prices of the cars as they all Arnt cheap but I’ll get the wheelie bar thanks mate
What size is the brushless motor shaft thanks
3.2mm
Brill thanks for the reply
awsome ive got one and i think youre already subbed to my channel
Yeah I am. They are a fun car to drive . Thanks for stopping by👍🏼🚗