Greetings from Melbourne Australia Mike! I have both, the XC 3401 VRG and the XCE 10-8-125 . Love both! The XCE is what I use the most! Great Video guys!
Probably the original - the XC 3401 VRG or as I call it - The BEAST! Why? It has the most RPM and OPM and you need everything working for you when working on neglected gel-coat. If the gelcoat is in excellent condition, then I would use the Supa BEAST. -Mike Philips
Hello Mike, greetings and love from India. A question out of context, I've seen you use Sonax Glass Cleaner for various applications. I'd like to learn more about that. Like, what are various other things I can use a Sonax Glass Cleaner for?
I use it for, Prep Wash - both waterless and rinseless style. www.autogeekonline.net/forum/how-to-articles-by-mike-phillips/126153-sonax-glass-cleaner-prep-wash.html Also as a clay lube. Probably other things but that's off the top of my head. Wait, I also use it for a glass cleaner. :) -Mike Phillips
Heck yeah! When applying a wax or sealant you could easy switch over to a 6" backing plate and a 6.5" or 7" foam finishing pad and really cover some real-estate FAST! -Mike Phillips
Awesome classes. Next week you should do one thing that irritates all of us detailers. The dreaded black trim. The one thing I found that works great. Jif peanut butter
Click link below - see the secret to Jif Peanut Butter (post is from 2010) www.autogeekonline.net/forum/ask-mike-phillips-your-detailing-questions-/23502-tell-everyone-one-your-best-detailing-secrets-4.html#post298595 -Mike Phillips
No. That is TOO large of a stroke for gear-driven. It can sound good on paper but in the real world - you could not hold and run that buffer over car paint. -Mike Phillips
Mike your work is awesone …. Great knowlodge in 30 years…. Cheers from brazil ….. big fan of your work….. love the video 1 step you and yan did in 30 min…. Great job
Mike, I have a Makita P05000 gear driven polisher. Saw an older video of you covering it but noticed you don't sell it through Autogeek. Just curious why you don't carry it or if you have any thoughts about it. I personally love it plus it's ability to switch to free spinning.
Looking forward to the dr c chip one boy's. You did a quick introduction on the deodorizer system and I would love to see more on that. Thank you for great content every week.
I'm struggling with small hair scratches appearing using the new flex xce.. no matter how hard I try slow I move even hardly using pressure tried everything but still get small scratches causes small scratches used new pad can you give any advice 🙏
Pad and compound and polish is key and most importantly pressure you put on the machine, try the microfiber and finish with the yellow rupes, sonax cutmax and perfect finish as far as speed 1-3 and just guide the machine with minimal pressure and compare it with a little bit of pressure and see which fits you best. try not to run run pad dry, should be damp and clean or switch ur pad every panel. Hope this helps
To save time. "I'm not going to refer to these by their part numbers," the proceeds to refer to them by their part numbers. LOL! Just pulling your leg. Nice, informative video.
At one point, you said listen to the engineers and trust that they did everything for a reason, but then you went against their suggestion and put a 6" plate on the Supa BEAST? Any reason why other than bigger/faster?
Greetings from Melbourne Australia Mike! I have both, the XC 3401 VRG and the XCE 10-8-125 . Love both! The XCE is what I use the most! Great Video guys!
Thanks for sharing! - Yancy
My thoughts exactly, that's why I went with the original beast 3401!! Awesome polisher!! 👍🇨🇦
I own the Flex 3401 and love the beast! Nice job and alot info guys. 👍👍
Really like demo near the 50-minute with the Supa running on edge, no stall!
Yeah buddy! -Mike Phillips
From Melbourne Australia!
Great live video Mike! I have both, the Beast &Supa Beast ! I prefer the Supa Beast !
Right on!
Thank Mario - I'm with you,
1: Smoother
2: Quieter
3: Lighter
4: Cooler
That's 4 improvements over the original BEAST. -Mike Phillips
@@autogeek indeed Mike, love this machine!
thanks for your time guys! really appreciate it. waiting a video about all the nano polishers outhere and some technics with them
You got it! - Yancy
Hey Mike great video. If you were to use it on gelcoat as you shown in past videos, would you prefer any in particular
Probably the original - the XC 3401 VRG or as I call it - The BEAST!
Why? It has the most RPM and OPM and you need everything working for you when working on neglected gel-coat. If the gelcoat is in excellent condition, then I would use the Supa BEAST. -Mike Philips
Hello Mike, greetings and love from India. A question out of context, I've seen you use Sonax Glass Cleaner for various applications. I'd like to learn more about that. Like, what are various other things I can use a Sonax Glass Cleaner for?
I use it for,
Prep Wash - both waterless and rinseless style.
www.autogeekonline.net/forum/how-to-articles-by-mike-phillips/126153-sonax-glass-cleaner-prep-wash.html
Also as a clay lube. Probably other things but that's off the top of my head. Wait, I also use it for a glass cleaner. :) -Mike Phillips
@@autogeek thanks for the reply. Appreciate that. :)
I've also seen you use it as a chemical stripper some times. Can you please let me more on that?
Can I use this tool, in my case a CBEAST, to apply a wax or sealant as a mobile detailer?
Heck yeah! When applying a wax or sealant you could easy switch over to a 6" backing plate and a 6.5" or 7" foam finishing pad and really cover some real-estate FAST! -Mike Phillips
Awesome classes. Next week you should do one thing that irritates all of us detailers. The dreaded black trim. The one thing I found that works great. Jif peanut butter
Click link below - see the secret to Jif Peanut Butter (post is from 2010)
www.autogeekonline.net/forum/ask-mike-phillips-your-detailing-questions-/23502-tell-everyone-one-your-best-detailing-secrets-4.html#post298595
-Mike Phillips
Love your videos Mike!! Question: Do you think Flex or Rupes will ever come out with a 15 mm or 21 mm gear driven polisher??
No. That is TOO large of a stroke for gear-driven. It can sound good on paper but in the real world - you could not hold and run that buffer over car paint. -Mike Phillips
3 dislikes from 3 employees that got fired lol this is great content
Hey Mike, would FLEX tools be a good combo with RUPES pads ? Or which pads would you advise/suggest to work with FLEX tools ?
I love all the RUPES pads on both RUPES tools and FLEX tools. -Mike Phillips
Great information very well explained
Glad you liked it - Hope all is well with you Axel. - Yancy
Thank you Axel. -Mike Phillips
Mike your work is awesone …. Great knowlodge in 30 years…. Cheers from brazil ….. big fan of your work….. love the video 1 step you and yan did in 30 min…. Great job
Mike, I have a Makita P05000 gear driven polisher. Saw an older video of you covering it but noticed you don't sell it through Autogeek. Just curious why you don't carry it or if you have any thoughts about it. I personally love it plus it's ability to switch to free spinning.
They carried it once it was released, but it was a slow mover sales wise, so they stopped carrying it.
Master nice video,, Flex #1 👍💪
Appreciate it - Yancy
Looking forward to the dr c chip one boy's. You did a quick introduction on the deodorizer system and I would love to see more on that. Thank you for great content every week.
More to come! - Yancy
Thank you for this class
You are welcome - Yancy
I'm struggling with small hair scratches appearing using the new flex xce.. no matter how hard I try slow I move even hardly using pressure tried everything but still get small scratches causes small scratches used new pad can you give any advice 🙏
One of our techs here can walk you through this and help you out! Our number is 1-800-869-3011.
Pad and compound and polish is key and most importantly pressure you put on the machine, try the microfiber and finish with the yellow rupes, sonax cutmax and perfect finish as far as speed 1-3 and just guide the machine with minimal pressure and compare it with a little bit of pressure and see which fits you best. try not to run run pad dry, should be damp and clean or switch ur pad every panel. Hope this helps
To save time. "I'm not going to refer to these by their part numbers," the proceeds to refer to them by their part numbers. LOL! Just pulling your leg. Nice, informative video.
Hey Mike...I was a little too much in a hurry about my question regarding RUPES pads, as you talk about them. So disregard my previous comment
There’s a learning curve to the 3401, but once you become comfortable with it, you can plow through AIO jobs.
Holy shit you loaded that pad up with cutting cream! What happen to three or four dots of compound, like everyone else does? Who’s correct?
@Steve Morley sounds good then. I don’t need to be too worried about loading my pad up then. Thx
Lol are you serious? Doubting Mike P the legend? There is no1 in the detailing world as much experienced as him…
@@blackmagician0078 not doubting, just asking. 👍🏻
Hi Mike Nau form Vernau Motors
Howdy howdy! -Mike Phillips
At one point, you said listen to the engineers and trust that they did everything for a reason, but then you went against their suggestion and put a 6" plate on the Supa BEAST? Any reason why other than bigger/faster?
As Mike Phillips would say to cover more real estate quicker !
Agree, guy in the background is irritating
Great video, but yes, he added nothing with his interrupting the goat Mike Philips.
I'm a flat rate detailer I can't spend that long on a vehicle. They still look good but I got to move
Beast or rupes melli