I recall being at the meeting when Gary negotiated a 1 year lease for the original Twin Pine location. Did not include the name afterwards but in a used car dealer mindset the original owner was threatened many years later when he had a stroke. What a good christian that new Twin Pine is
In 4wd low you would not be using the manual shift up or down option. You can only go 20mph. The factory manual says never over 25mph. You don't have many gear choices from 0-20mph. Also, you can have difficulty shifting if things don't mesh correctly. You then want to put it in drive and go between 0-5mph. Then you shift it into neutral and while slowly rolling pull up on the lever if engaging or disengaging.
Hello I have taken of the driveshaft.Now I have the vehicle in 4wd low(not using it until fix it) This is the 3rd PROPSHAFT cvjoint I will be putting on, in the last 4months on the driveshaft. Can I kindly ask you what is the vibration(at 60mph) and the self destruction caused by ? I’m guessing it must be angle aligned and balanced(the whole drive train) Thank you for your time and effort in answering
Thanks bro I am always switching vehicles. I found your video helpful for the 2006 jeep Cherokee im in at the moment. Good stuff. Guys act like your stupid if you dont know how to use 4wheel. Anyway thanks again.
Thanks ! I just bought a keep commander 2009 I forgot to Check the 4x4 and honestly didn’t know how … by the time i pulled the lever i was in drive and it said service 4x4 … 😢i’ll try the your way.
I'm still stuck on 3rd gear and I can't figure it out I have done just about every video I seen and yet I'm still having the same problem can someone help 2006 Jeep Commander 4.7
I recall being at the meeting when Gary negotiated a 1 year lease for the original Twin Pine location. Did not include the name afterwards but in a used car dealer mindset the original owner was threatened many years later when he had a stroke. What a good christian that new Twin Pine is
we appreciate this.
In 4wd low you would not be using the manual shift up or down option. You can only go 20mph. The factory manual says never over 25mph. You don't have many gear choices from 0-20mph. Also, you can have difficulty shifting if things don't mesh correctly. You then want to put it in drive and go between 0-5mph. Then you shift it into neutral and while slowly rolling pull up on the lever if engaging or disengaging.
Hello
I have taken of the driveshaft.Now I have the vehicle in 4wd low(not using it until fix it)
This is the 3rd PROPSHAFT cvjoint I will be putting on, in the last 4months on the driveshaft.
Can I kindly ask you what is the vibration(at 60mph) and the self destruction caused by ?
I’m guessing it must be angle aligned and balanced(the whole drive train)
Thank you for your time and effort in answering
Thanks. I just got stuck on the Oregon coast and you got me out!!!!
thanks ... just got a 2007 used and I hate reading owners manuals. Good simple video! thumbs up
I appreciate you for making this video saved me time and alot of money
Very good video. Simple and to the point. Thanks for sharing, now I know how to do it.
Thanks bro I am always switching vehicles. I found your video helpful for the 2006 jeep Cherokee im in at the moment. Good stuff. Guys act like your stupid if you dont know how to use 4wheel. Anyway thanks again.
Thanks ! I just bought a keep commander 2009 I forgot to Check the 4x4 and honestly didn’t know how … by the time i pulled the lever i was in drive and it said service 4x4 … 😢i’ll try the your way.
Thank you so much I didn’t know how to take it off
Silly question but how do you get to 4WD high
I'm still stuck on 3rd gear and I can't figure it out I have done just about every video I seen and yet I'm still having the same problem can someone help 2006 Jeep Commander 4.7
Are all comanders 4 wheel drive?
No, some are only front or rear wheel drive
@@controlleraulait hey a whole year later. Way to go!!
@@fpvwithme eh it's been only hours for me. I just read it of course. You have no replies I already assumed you figured it out.
I have a 2006 with the 4x4 badge but no high or low buttons inside.
@@schuylerthomas5965 that's weird.
Lifesaver Thankyou
This was very helpful
Gracias por su explicación
I wish you would have shown whats on the dash after you put it into 4Lo. For some reason mine takes it out of D and puts it into 5th gear.
4th or 5th depending on trans and it's due to not needing to exceed the 25mph zone
Thanks for this video.
i always shift it by accident i think it’s messed up my car
And if your in 4wd low and slap it in it park its makes a fun noise you should try it.
I think you would have to have 4 wheel drive and 4 low 1st......
thank you
Mines dont have the little lever :/ but it say is 4x4
so finnaly its 4x4 or not?
Luis Zambrano ,
Its a 4x4 bit may not have the low option
😆😆😆
Quadra trac Ii don't have the t bar I feel you bro
You have it wrong when you turn on the 4x4 low it turns on the traction control hence the indication light
He said it right. When the light is on traction control is off
Thank you