When to use High Range or Low Range Like a Pro Offroad!
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2023
- Tackling Tough Trails: A Guide to Selecting High Range or Low Range like a Pro!
When you first begin 4wding it can be a bit confusing knowing when to use high range and low range so let me help you out with this video.
If you're interested in signing up for my upcoming online 4wd training course click this link to register your interest and I will email you FREE and exclusive 4x4 training videos www.4x4online.org/register
Here at MadMatt 4wd there is everything from 4wd tips and tricks to fixing your four wheel drive. As a professional Four Wheel Driver I am all about educating and building the 4x4 community. If you are passionate about going bush with a 4x4 then this channel is for you. Enjoy and please subscribe & Hit the bell icon to be notified as soon as they're up!!!
Head to my website and use the coupon code 'MadMatt' to get a discount madmatt4wd.com.au/gear/
MadMatt 4wd on Social Media:
Facebook: / madmatt4wd
Instagram: / madmatt4wd - ยานยนต์และพาหนะ
I’m passionate about helping the 4wd community and I'm developing an online course so i can help as many people as I can to get out there and wheel well on their 4wd adventures. To register your interest and for free and exclusive training videos visit madmatt4wd.com.au/register
The lower the gear the more the torque multiplication.
is there a big difference between a 4wd with hi /lo range or a awd with hi /lo range
The bicycle analogy is good but to push it a little further think of the transmission gears as the sprockets on the rear hub and the transfer case as the chainrings by the pedals.
A fine explanation - With standard 3:55 gears, larger tires and a modest 3" lift, I go into 4-low for almost all steep climbs or descents. With 4x4 trails that climb several thousand feet in California, I'm in 4 low a lot. However, 2 WD on dirt roads its too much FUN to slide around corners😃
Simple and to the point my brother! Just awesome! Looking forward to seeing your other videos 🙂
I stick in high range when traveling 20 or more miles per hour, dropping into low when I hit an obstacle that needs lower speeds. Also use low range on steep, loose trails. I tend to prefer being in low range and taking it slow.
This video is really helpful specially with new guys on 4x4. As the video says not all cars are the same. Some have more option when it comes to 4x4 specially the newer ones that also have 4h and 4hllc and 4lllc. And they have more gears (but less is better). This is a good baseline or beginners guide to 4wheel driving. You can never go wrong with the basics. 😁 And also check the owners manual because it has most of the what and what not to do with your car. 😁 Cheers! This kind of informative video is better than those booty shake on tiktoks. 😅😂
Thank you for the great info.
I drive on sand dunes on 4L on my Prado V6 petrol J150 with traction and ABS disabled.
Amazing it is.
always super informative and helpful information MadMatt!
Thanks mate
took a class with an i4wdta certified teacher and he said the same thing. on a lot of the trails here you’re not going fast so just keep it in low range so you’re ready for any obstacles. even on easy terrain where you don’t need the extra torque, if you’re still moving slow, keep it in low.
Oh wow, I've been waiting for this video for years 😅😊
Don't forget to mention that all the power goes to the wheel with least resistance with open diff.
I have a Prado auto petrol and i rarely use low range as most of my 4 wheel driving is on beaches and sand dunes were i think its all about momentum so i only use low range for very slow almost crawling speeds, usually under 30 to 40 kmh.
your videos are always great to watch
Glad you like them!
I use low range any time I am driving at less than 500 ft above sea level, and high range any time I am above 500 ft. 😉😉😉🤣🤣
Lol. I do like you 😂😂😂
Well i see u must be fun at the parties
I am using low range till 20km around my home, for more high range.
Duh! That's the only way 😂
I have only been driving 4x4's for about 52 years now. Some 6x6 deuce and a halfs in the Army. I have built transfer cases and axles. Installed manual locking hubs and done a bit of rock crawling. Been stuck a few times and always self-extracted. Driven some 4x4 tractors including a Cat 980 and a Case 570.
I use low range when I am pulling heavy loads or need to crawl or on steep tracks. Low range makes the main transmission gears closer in ratio which can help in certain situations.
Thanks for this as I'm new to this game and you hear a million experts different opinions. Great help cheers.
Glad I could help! And feel free to reach out if you need any other help. Lots of videos here to help you
Thanks for the vid m8. Appreciate vids like this.
When I'm just cruising trails I use 2 / 4hi depending on sand / mud. I have used 4lo for climbing steep hills / crawling. I also use is when snatching a vehicle from mud / sand.
Really good video. I appreciate you sharing from a manual transmission perspective as well.
My pleasure!
Thanks for the info, learning took place
My last 4x4 had a locked front diff and automatic diff locks, so I wasn’t comfortable with the diff wind-up risk of hitting a section of tar or the amount of grip you can get on those higher speed dirt roads. My current car is an AWD with open diffs front and rear, which is the best compromise for the unsealed road I do … I don’t really do proper 4x4ing. The wife and kids aren’t into camping holidays.
In my 95 GQ DX Patrol and my 05 hilux (kun26r) i use high range 4wd as an awd so its just added traction on dirt roads or a really hard packed beach, i use low range for 4wding on a tricky track like a local "powerlines" track, or boggy/soft beach if i had a fancy new 4wd with modes, traction control etc ill prob change my driving style
Great effort mate. Good luck on the online course too. Great idea.
Thanks, you too!
Nicely described and explained Matt. Looking forward to the 4x4 instruction videos.
You know, I have yet to use low range on the Jack. Someday, somewhere I will, I'm sure...especially pulling the camper.
By the way, the Jeep Grand Cherokee looks like it is extremely capable stock.
Go wheeling somewhere where you need to, its worth the time. You need to 😂😂 , thanks
Thanks for making it makes sense
Thanks for this video, cleared up a few things
Glad it helped!
That was a very interesting video Matt. I see you are enjoying your Jeep.
I do like the v8
Awesome once again Matt
A great explanation of Hi and Low.
It’s amazing how many times you hear a car revving it’s rings out and you can tell the car is in the wrong gear. The more time you spend with your vehicle the more it will tell you what to do.
Keep up the great work Matt. 👏👏👏
Great point! Thanks for the comment Jack
@@MadMatt4WD 4 hi v 4 lo. depends on how much guts your 4 cyl sht box has..do you have a std 1st gear, or granny gear. whats your tyre size, transfer ratio, . auto, manual, makes a difference. modern 4x4rs are junk, not 4x4rs..mate took his mu x, to w.a. from s.a., 4 wk trip , ish. cost 8k ,,,!!,, for a new engine mount.. people are brainwashed into . you have to have a new,''reliable'', vehicle. well, i have a 1962 f100. 4x4, still good..
Great expalination mate
I just finished Installing a new radiator for a customer same Jeep grand Cherokee WJ was a 2003 Model 3:52
I go to high range soon as I leave the bitumen, control to 4 wheels, low range on steep/ slippery loose conditions, slow and steady control, thanks for sharing buddy
Good stuff!
One thing I'll add to that is that most national parks in African countries have a maximum speed limit of 40 km/h (25 mph), even on their sandy tracks. Therefore, I actually use low range in those cases for the same reasons as you. Furthermore, if you're in a really under-powered vehicle such as an old 1970's Land Rover with around 50-55 kW (67-74 bhp) at the flywheel, you'll need to be in low range on sandy tracks anyway, simply because they can't pull high range. One thing I will add is that a lot of vehicles these days, particularly with automatics, have inhibit mechanisms which prevent you going at any reasonable speed in low range. I think the current generation Hilux prevents you using any gear higher than 4th in low range, which really means that under conditions where I'd rather be in low range, I actually have to be in high. The reason? The transfer box can't cope with high speeds in low range.
I know why manufacturers restrict gears but I find it really annoying. The Ranger I used for Mount Maxxis won’t go into 1st unless you select it. At least it can be selected.
@@MadMatt4WD My parents have a Discovery 3 automatic, that's pretty good because you can select up to 3rd gear in low range whilst stationary for really slippery surfaces. It even makes that suggestion on the dashboard display! That, coupled with terrain response, means you can be oh-so-delicate on really slippery ground. You have to manually select 1st gear in low range though, because in D it defaults to 2nd gear.
What I like is that you can change from low to high at up to 60 km/h (37 mph), and high to low up to 40 km/h (25 mph) if you have an automatic, 20 km/h (12 mph) if you have a manual - and the procedure is clearly demonstrated in the Owner's Manual. I really wish other manufacturers understood the benefits of being able to go faster than a crawl in low range. My old Land Rover Series III is fine up to 50 km/h (30 mph), but the warning plate does tell you not to exceed this figure - I assume because it doesn't have CV's in the front axle, just UJ's.
@@cameronwood1994 in the race car I change low to high at up 60kph but it won’t go the other way. I agree being able to change at speed is a good thing
Whenever I get off the road on to a track or something I always go into low with center diff lock but when it's gravel roads or beaches I go high center diff lock ( I own a 94 land Rover discovery 1)
Thanks! If you live in a snowy area, always plow in 4Low
We always use 4L with our 2014 chevy 2500 duramax when pulling a 35 foot GN trailer loaded ( 20 1400lb hay bales)out of the field. Once on a county road I stop and go to 4H and tow haul for the 8 mile trip home.
I do similar, high range if going to be above 30 KPH, low range if below usually
Without a doubt the best explanation I've found as a newbie 4x4 wannabe 😅
Well thinks
I use low range for going over high clearance obstacles so I can go really slow and keep the suspension up and it also helps for high inclines. Also for manual transmissions it helps cuz if it's super low you pretty much don't have to worry about stalling like in my 23 bronco it's so damn helpful that super high crawl gear and low range it only goes like 2 mph at the fastest
i have an 02 s/duty. 4.2tdi, mwm sprint. 700nm. 175kw. ZF 5sp. 4.11 gears. i drive down hill..or it would stall.. u.s. never had them, but built in brazil, under lic. motor is a german tractor engine. no bs computer..
very well explained Thanx Sir
Most welcome
New to offroading. So far I use hi for anything higher speeds over 20kms or easy tracks. As soon as I gotta slow right down and either crawl or to be safe. I'll drop into low range.
That’s a good start. Don’t be scared to experiment and with time you’ll get very competent with when to use what.
I switch into 4WD H when I start to encounter washboards or rocks. I shift into Low gears when it becomes difficult to manage the clutch
I use low range when I'm climbing steep hills or Moving over large Objects or Obstacles 1:49
Thanks for such informative video. Your videos are high quality.
So nice of you
Complimenti, vado in off road da molti anni Ti ho ascoltato con piacere, hai espresso dei concetti importanti in modo semplice e comprensivo, davvero bravo!
I happy I could help you.
Great video. Can you do a video on full-time 4WD versus part-time 4WD?
Hi Matt, thanks for posting this. I have a 1994 Wrangler YJ, with a 4 banger and a 5-speed tranny. When I'm off-roading, I normally run around in 4 low, in 3rd or 4th gear. When the trail gets harder, I might have to shift down into 2nd or even 1st gear. It's almost like driving an automatic. In 3rd gear, I can almost come to a complete stop without stalling and then get back on the accelerator. This really works for me. It's good to see you posting again.
Thanks. I will do similar in low gears
Nice jeep wj, going over that rut at 5 min really showed how the varilok axles work. Jeep wj is what I offroad so I know quite a bit about them
Yeah I’ve not quite got my head around how it works yet but it goes well Offroad for what it is.
Yah I only have a little money in mine lol, aussie locked rear, 242 tcase, swapped the front from an open to a varilok axle, 4 inch lift on 32s, sway loc quick disconnect sway bar up front. But honestly the Quadra drive version on a budget 2.5 puck or coil lift with 30s or 31s would do almost as good for half the money, even stock quadra drive is very capable. I just have too much money and time on my hands so I keep finding stuff to do to it
good stuff mate
Awesome video thanks
Glad you enjoyed it
This is basically back to basics and I believe that even some one learning for the first they can understand this it's text book 101 if you will, loved the video mate
Thanks. There’s many people who are not sure about how this works.
That's true mate
My favourite rabi!
High range for me is gravel roads and paved roads with light snow and low for just about everything else. My traction control goes off in low but I also turn it off in high.
I also have an “auto” setting (chevy truck) which I’ve used once when the paved road had intermittent snow as the storm was just starting.
Thanks for sharing!
Up and down hills, crawling over rocks and other rough terrain I stay in low. I don’t necessarily use low for sand but my truck isn’t stock. 365hp magnum 360, NV4500 and 4.56 gears/35s give me a lot of options.
we dont have that option here in aus.. there all 4 cyl jap twin cab utes.. ifs. rubbish. i drive yank 4x4rs. not jeep. you never got the s/duty, 4.2tdi. german engine, brazil built. mine has 700nm, 175kw. good enough for aus.. zf 5sp. 4.11 gears. i have to drive down hills in low. with 35,s. motor aslo fitted to silverado,s in brazil.. watch there vids. try f1000 mwm. they have excursions. theres a vid of an f truck, pushing a motor bike down the freeway.. twin turbo, big.. i havea 62 f. 4x4, 75 highboy, 82 bronco, 02 s/duty.
Great vids👍👍
Lake Havasu 🌞 Az USA
Thanks mate! Appreciate it. And I appreciate your encouragement each video, it means a lot.
Nice video and good commentary. Here are a few thoughts based on our experience:
Whilst we had our Pajero, we used low range a lot. Going on the beach - engage low range, going up a track, engage low range. The reason was that low range gearing was pretty adequate (going up to 80km / h in 5th so we could keep that for the beach run). We heard that for automatic gear boxes this helps with transmission temperature.
Now fast forward, and we have LC 300 with 10 gears. I haven't been able to confirm, but pretty sure that H1 is more reduction than L1 was in the Pajero. And whilst I have 7 gears in low range, I'm still capping out somewhere around 50 km/h. We have also found that the noise in low range is really quite high - seems to come from the air intake, but not sure what that is all about.
So - is there a case to be made that it really depends, especially with those newer gearboxes with high number of gears? What are your thoughts on when does low range matter on a newer car like the LC300?
A landcruiser is more hard core than a Pajero so it’s gearing will be lower. I’d say you need to go into high range at a lower speed in the 300. Use the taco as a guide and have a read of the handbook.
80ks in low.???..that wasnt low range, low range should top at about 30ks. or your gearing is sht..&, you bought an lc 300 for what reason.?.image.?. last real toyota 4x4 was the 80 series. all rubbish after that. nissan is better. gu '96. why, because they have a better wheel base & transmission brake. toyota 80 had a better 1st low.. but. id buy the nissan, seeing toyota use the diff & steering box from nissan. as toyotas are weak.. you bought an expensive mall crawler. & its auto.. not,,a 4x4.. i drive old yank sht, cos it works.. mate is a toyota nut. 80 series is it.. new is not better.. plus, pajero.. first mistake.. we have them in the club,,pretty useless. too small, too low, too expensive when they break.. ifs bs.. if, toyota or nissan had there heads screwed on,,id buy one.. best design 4x4 were the f100 79 4x4, or the range rover. why,,suspension.. it works.. [ not a range rover fan. rubbish]. only mod an f100 4x4 needs, is a locker front. thats it.. i have several f series. inc. a 75 highboy. look them up. problem with toyota, all varients come on the same size chassis.. too short. the 79 ''v8 tdi'',, is a disaster, cost 15k to fix toyotas fk ups..then, it still has problems.. guy with a new,, mu x , went on a 4 wk w.a. trip.. cost him 8k,,,8k,,,, for a new engine mount. that, is new vehicles.. ifs, add blue, [ which is urine ], dpf, egr, computer, sensors. 1, of these shts out bush, you die..any person, that buys a 4x4, & intends, to do 4x4ing, needs to join a 4x4 club, with registered trainers. not a cowboy show, they, get tracks , areas closed down for being dicks..which hapened to us with new members doing donuts in the guys field..
I have experienced that on some tracks, especially steep mud climb, I use 2nd gear low range but there is not enough momentum. Once I switch to 1st gear high range, I get a lot of grunt. Driving manual 80 series. Thanks
Yes and with some experiance you'll learn this as you have.
Remember to allow for the increase in feul use if choosing to stay in low range
How much fuel you burn depends on how rough the terrain is that you are traversing. If it is so rough that you can do a maximum of only 20-30km/h, fuel consumption is going to be high in either Hi or Lo, when compared to cruising on a smooth road. But you may actually get better economy from Lo because you have more ratios and a better chance of finding the ideal ratio (5 or 6 or more to choose from) for any given situation than having only Hi 1st and 2nd.
because you drive jap 4x4rs ?.. i, idle, when 4x4ing. 3rd gear low, on beach, doing 1000 revs.. soft sand. its becouse you, dont have any torque.. your gears are wrong. i have to drive down 70 degree hills. or id stall.. mate drove my truck, when they came out in 1999, at the toyota ''proving ground'',, being a toyota nut, it impressed him no end & he still talks about it. it idled all around, up, down, the track. never touched the accelorator,, 02, super duty, 4.2tdi. mwm sprint engine from germany, tractor diesel, built, fitted in brazil, sold world wide, except u.s., bought mine 6 yrs ago, wont sell it. gets 14 lt 100, 700nm, 175kw. weighs 4t.. turns better than a 79 series..& more power.. if you have to worry about fuel use, dont go outside.. i wouldnt worry about fuel,,its the breakages that cost you.. guy waited 2 days, for a tie rod. which his doughter brought from home, which was also bent, but not as bad.. another guy had a sensor sht, went into limp mode, took 3 days get to a ''town''.. i had a 1 ton ute, the rear shackle left, spent 3 wks in burke, till it was fixed.. people die in the desert, cos there car breaks.. cant drink fuel,,eh....
Hi Matt,
As detailled below, its well worth getting on a make specific forum to try and find out things like what gears the torque converter will lock up in if you have an auto, or when the centre diff locks with on demand 4WD systems to know when it is best to use low range...
Each of the three 4WDs I have owned I have used high and low range differently in each due to the particulars of the vehicle
1st was a Suzuki Grand Vitara with an auto box....torque converter would only lockup in 3rd and 4th gear, so in addition to the technical slow speed stuff, i went to low range for soft sand, where it would run in those gears nicely at about 60km/hr...
2nd, LN106 Hilux, manual box....only went to low range when i found myself in 1st hi and barely getting above idle, or needing to slip clutch. Back to hi when i found myself in 4th or 5th gear a lot
3rd, KL Cherokee trailhawk, auto, fancy on demand 4WD system....go to low range the second it looks even remotely challenging....from what I have gathered on Jeep forums the centre diff will never lock in high range, (I believe your Jeep is the same), which can cause the transfer case to overheat and leave you with a 2WD vehicle til it cools down as it is constantly shuffling torque around. Switching to low range locks the centre diff and eliminates this issue, while still allowing a reasonable top speed...
Yes every vehicle is different for sure. I recommend people read the owners manual but hopefully the information in this video also helps people.
if its not manual. dont buy it, dont go 4x4ing. auto needs lock up on all gears.. traction control & down hill assist, are bs.. stay home.. the centre diff should be locked permanent, or in 4x4. too many bs choices with new ''4x4rs''.. a centre diff, if the vehicle, cough,, has lockers, should only be used in mud, sand, or, on rock, being new bs, it will break.. watch u.s. vids. all 4x4 people, use old school 4x4rs, cos they work. watch recovery vids, 99% of vehicles they rescue, are new.. trail mater, matts off road, casey la delle, justin king colorado recovery. you learn more, as they been doing it decades more than us, &, all the gear we use, comes from there.. products for a 4x4. zf 5 / 6 speed. nv4500 / 5600. 1356 / or 205 transfer case, dana diffs, ANY. diff gear 4.11 to 4.56. minimum tyre 35'', winches, 2, front & rear. or in a cradle..solid axles, no ifs garb..preferably 8 stud..engine, what ever floats your boat.. this is why i drive old yank trucks,,.no computer, no sensors, no egr, no dpf, no worries.. note. jeep cherrokee, 1980 ish, had a centre diff. v8, solid diffs. ford broco 1982, lsd front & rear. all u.s 4x4rs have lsd..since the 60,s.. toyota lsd,s dont work..nissan are better.. cant beat dana diffs..most serious off roaders in u.s., with ifs, change it for a solid diff. they drive better & dont break.. jeeps, toyotas, nissans, too much work to make them reliable..
I am not afraid to put it into low range. I have wheeled with guys who like to brag "I didn't even have to go to low range". I would tell you their names but I can't remember because no one cares. If I know the trail I pick the time to go to low. If I don't know the trail I read what I can but often will just go low as soon as I hit the dirt. My trail rig has a 4 speed Atlas so I can do high, 2 to 1, 2.72 to 1 and 5.44 to 1. Normally I just go 2 to 1 when we hit dirt. You can get up decent speed but also have the advantage of the extra torque. If it gets technical I will go with the other choices.
The trick is, don't wait till you need it or are stuck. Many transfer cases do not like to shift to low when the vehicle is not moving.
Yeah I never understand why people think that’s something the brag about. All it says to me is you don’t know how to drive. That atlas is a great case.
@@MadMatt4WD Thanks for the reply Matt. Yeah, it's just kinda weird. My brother had a 70's Dodge power wagon back in the 80's. He would get stuck and then try to put it into 4wd/ low range but the TC didn't cooperate.
Running in low range is so much easier on the rig, I just don't understand it.
Yeah, the Atlas is a nice case. I picked up mine 'used' but never was never installed. I had to swap the input shaft and I spent 8 weekends on the garage floor installing it but it was worth it. So much flexibility.
It takes a bit getting used to. The main TC shifts different than the planetary gear. But once you get the feel for it you can do a lot.
Hey, thanks for the videos! I am glad your channel is doing well.
Can you do a video on judgement of sides and back and front when in city roads
Love your content, Matt!
I appreciate that!
i'm not a oof roader but i do use the small rod when needed from what a i read and watched over the years.. but i did understand better watching your video.. please go on and i wish you the best
I’m glad I could help
The more slick or loose the ground is. Use high on harder pack.
Nice video - I have a FJ Cruiser and over the years have learnt when to alternate between H4 and L4. I have plenty of "power" at my disposal, but it tends to be high up, so..... examples: thick sand (especially when it's hot) - L4. Lots of power low down so the wheels don't spin. Same on loose gravel and rock crawling......
Well said!
@@MadMatt4WD - thank you 🌺. Being a woman I have been ridiculed many times for engaging H4 on all dirt roads and L4 by choice (depending on the conditions). However, with 224'000 Kms on the clock (all driven by me) my beautiful FJ has (to date) not needed half the repairs of those vehicles belonging to the ridiculers. Just because these off-road vehicles are so capable, there's absolutely no need to be "gung-ho"......
@@jojoellensohn3513 there’s many out there who have very little idea how ignorant they are. On Fraser Island last week some muppet in front of me did a whole track in 2wd. I imagine he thought his driving was super skilled. Meanwhile he was as slow as a wet week the auto was working hard and he was wheel spinning all the time. Just idiot level 10. Hed be the goose sitting around camp telling us how he did all of Fraser in 2wd.
@@MadMatt4WD ....... oooooooooo indeed 🫣 I've met and listened to sooooo many of those "ee-jots" - quite recently too, whilst driving the deep sand tracks in the Okavango (Botswana) 🤷 No cure for "stupid" 😂‼️
I just got my first land cruiser, a US spec 2006 100 series, and the owners manual went into great detail about what to use when, and even covered things like starting in 2nd LO and engine braking. I learned a fair amount!
Very cool!
Great video.
Glad you enjoyed it
it's my first time to your videos well explained
Thanks.
40kph rule of thumb! Yep 100% agree.
i use low range anytime i cant hold second high. yes you can got to first high but if you are getting stuck or come up to something you dont have a gear to go to.
Great video, Matt! Even interesting to a bloke with a bit of 4Low time. One matter I'd like to raise attention for your viewers to is that many vehicle manuals advise against using the final gear (5th, sometimes 6th) in 4Low. All the gearbox torque is transmitted to the overdrive gears. For the same reason one should not tow in highest gear (every car I've owned advise against it on the manual).
I'm sure no damage will come during light driving, but when you're hitting a moderate incline in 5th Low, just remember you've got 2x more torque forcing through the drivetrain!
Cheers and have a great day!
Because I only drive old stuff I’ve never read the book so I’ll take your word for it. I do t wish to be rude but I don’t think you’ve got the torque understanding right. The gearbox doesn’t get affected by the low range it won’t even know it’s driving into a different ration. The torque increase happens at the low range gear sets. So everything after that gets affected by the extra torque. Thanks for the comment.
Hi Matt. Thanks for thanking the time to respond to every comment. No offence taken at all. Thanks for calling me out on the error. You're absolutely right about the torque, I didn't think that one through!
It probably is no worse than doing hard work in 5th gear regardless of being in low or high on transfer case.
This happens when you're trying to rationalise something beyond your technical knowledge. I'm better off just sharing an explaination from the Bigjimny blog:
"Technical reason: As any mechanical engineer knows, gearing links / setups where gears with rather high gearing ratios (5th in gearbox) and rather low gearing ratios ("L" in transfer box) are combined, are structurally fragile - they are highly imbalanced systems considering the distribution of load forces throughout the gearing setup.
This means that in such setups, the gear with the high gearing ratio has to endure a lot more load forces than it would in a normally balanced gearing setup (in which all the linked gears have similar gearing ratios).
This has a risk of prematurely wearing out or outright destroying the high ratio gear in the setup if enough force is applied onto the gearing setup."
Hope that's of use. Have a good day!
this, is because its jap.. i drive up hills in 5th, towing 3.5t. get a real g/box. ZF 5 / 6 sp.. i dont need to use 1st, as its very low, good for off road.. 02 super duty, 4.2 tdi, 700nm, 175kw.. a real truck.. 4x4.. telecom, up in darwin, nt, allways broke the g/box in there toyotas, using 5th. towing a trailer.. sad jap stuff.. [ i really could use a 6 sp. ]..like an nv5600. sold in u.s. for 1,600. re co.ed. there fitted behind the chev 6.6, dodge 6.7,. small block or big block. dont matter.. the nv4500, was made because the 4x4rs, needed a 5sp, to get to there destination, but also needed the granny first.. they do this in the u.s. its demand,,unlike here,,just put up with the sht they sell.. jap 4x4rs are only made to up the towing capacity,,not to go 4x4ing..fact..
I’m interested in the course. Thanks
Great stuff make sure to sign up
Cheers for the info, i burned my clutch on my 2023 hilux while trying to climb with 4hi ! 😮💨
Oh no!
You really should stop with these videos, Matt, don't want too many people being able to get out there and find our camping spots😢 haha, nah awesome training/tip videos man! Even us 1/2 seasoned 4wd'ers learn new things from you so keep them coming 🙂👍
Lol. Thanks for the smile
You had me giggling at "you can skip gears." Indeed, that might come as a revelation to some, never really thought about it that way.
Nice.
Because i have 2wd low available on both my wheelers im in low range until i have to get out of it, for speed reasons
I will use low range while climbing a mountain or coming down. Going up even if its not rough its easier on the engine and can help keep the temp's lower. While coming down it will help slow the vehicle down so I don't wear out the brakes.
Under 20mph I’m 4-low. I want the stress between the transfer case and the tires, not anywhere else.
Just found your channel Matt and liked what I saw. Have liked and subbed. I have just had " full underbelly protection" (at least that's what I ASKED for) but just discovered over the weekend that there is no cover over the transfer case 🤔. I would have thought that would have been a must have ? I notice on your jeep there isn't one either ? ( I didn't notice on the video any other covers)
Having the transfer case NOT protected isn't my idea of *full underbelly protection* ,What say you ?
Thanks for the sub! I agree re full under belly protection. I’ve only just got the jeep and have belly pan to fit.
Steep terrain or heavy snow (when going slow) is when I use low.
I use 2wd wheneverI don’t need 4wd just because it’s easier to turn sharp corners.
Low range is for when the scenery is super good and you want to slow down and enjoy it! 😁
You have just broken the internet with the best comment ever. ❤️❤️❤️❤️
You made my life simpler, thanks for making fun of us newbies. Great demonstration all video by the way
Glad you liked it!
Hey Matt, I enjoyed your video! I have a quick question since I'm new to off-road driving: Is it necessary to come to a complete stop when shifting from low range to high range as the speed increases?
Yes for the most part it’s best to stop but read your owners manual as there are exceptions
@@MadMatt4WD awesome thanks!
Thanks Matt! Another great video. Surprised to see you in a Jeep. I know they aren’t to popular over there.
We have our fair share of Jeeps. I got rid of that one as it wasn't getting me excited but one day I may get into another jeep.
Matt; what's your opinion on the Torsen Diff as a rear locker solution?
Hey. No opinion as I’ve never used one
Hi Matt, what about when to use manual mode on a automatic. I use it a fair bit. Mostly in low range and specially down hill. But I don't know if I am damaging my auto
Your doing the right thing. I use manual mode all the time in my autos.
Matt, you failed to mention most 4wd utes have a locked center diff (transfer box) and are not meant to be used when on bitumen.
I know it's written on the back of the sunshade (who reads that?), but really you should not go into 4wd in a ute unless you are on gravel or grass/mud/slippery shit. Constant 4x4 vehicles are the exception here. (hence center diff lock option)
Trying hi-range will just twist the car up any time you want to turn a corner, eventually breaking something!
I have friends that say...just go to 4wd-hi in the rain...all good, and then wonder why they steered off the road!
Love your vids though...proper no nonsense stuff. We need more like you on youtube!
4H or centre diff locked as soon as you hit dirt or gravel, I don't care if it hard packed dirt, ect. its much safer this way and less wear and tear on the transfer case with a constant 4wd transfer case with CDL.
Low range if I'm going slow. Usually soon as I hit a track its in low. or if I'm going between tracks slowly its in low. If I know I'm going to be no faster then 20-30km/h its usually in low. I probably use low range or change between ranges more often then others but I like to drive minimising strain on my vehicle
You sound like me.
I always wonder why there is no 2Low range on 4WD vehicles. It would be great for towing heavy trailers in town (you don't need 4Low for that).
I have my landcruiser modified for 2wd low
My wife just asked me this yesterday and I didn’t know. Why is there an N on the 4X4 shifter? When would you ever use that?
Sometimes it’s for towing the vehicle. In the days of pto gearboxes it could be used to drive winches and stuff
The front locker on my silverado can only be used when in 4low so I engage it only when I am coming up to obstacles that might prove to be a challenge. I never think about going to 4low independently because in my mind it is tied up with having my front and rear locked up. It might not be the best habit because there probably have been spots were 4low could have been useful but because I didn't need my front locked I just never considered it.😮
Try low without the locker and get to know how that works for you.
When in doubt, low range
Thanks Matt. I also use 4L when reversing the caravan, so as not to run over the wife ;)
So you kick her out and then avoid running her over. 😂😂😂
@@MadMatt4WD she likes a slow speed approach and finish
Have you ever tested this grand cherokee wj in 4 wheel high range to see that efectivly is just 2wheel drive on back wheels
No I can’t see the point of that
@@MadMatt4WD a just want to say that 4wheel drivein high on that car is actualy just 2wd on rear wheels
Your name is mad but you’re friendly and not mad at all 😂
😁😁😁😁 thanks mate.
Is your featured Grand Cherokee a WJ or a WG?
Wj
how are the bars holding up on that thing
Offroading is incomplete without manual transmission!!
Autos are abit more forgiving of when to shift into 4 low. I myself am a manual driver and how I wish I had the ability to have 2wd low. Sadly I don't so 4wd low is the needed gear most of the time
I have my landcruiser modified for 2wd low
@@MadMatt4WDsuckynthing foe me is nissans transfercase are chain driven. Atlas trasfercase is possibly my next move. 4:1 gears and 2wd capabilities lol. Maybe
Hi Matt , did you find the clicking noise that you had comming from the jeep? Cheers Phil
Not yet but I believe the transfer case drive chain is slipping. Apparently it’s an easy fix.
Level ground: high range
Incline/decline/rock crawl: low range