Unlock Speed in Nitro RC | Hobao Hyper VS2
ฝัง
- เผยแพร่เมื่อ 8 มี.ค. 2023
- Watch more speed run content here === • RC Speed Runs
Special thanks to:
No Copyright Trap - / nocopyrighttrap
For all their amazing FREE No copyrighted Music playing in the background of my videos.
Equipment used:
Hobao Roto Start - amzn.to/3KHqMLp
Thermometer Temp Gun - amzn.to/3IUOnqN
Hot Racing Skid Plate - amzn.to/3HYIgQO
LED Lights - amzn.to/3VnysVj
LED Bike Lights - amzn.to/3XlAeH1
Skyrc GPS - amzn.to/3CVM04s
Arrma Typhon TLR RTR - amzn.to/3Jkt9TM
Arrma Limitless Carbon Fiber Kit - amzn.to/3cxsmAX
Arrma Felony - amzn.to/3wIKGhy
QS8 Anti-Spark Connector - amzn.to/3wIXBA7
Flysky Noble NB4 - amzn.to/3B01piF
FlySky FTR10 2.4G 10CH PWM AFHDS 3 RC Receiver - amzn.to/3TtqQ3A
AGFRC 50KG Digital Steering-Servo High-Torque - amzn.to/3COPV2W
Castle 1100Kv Sensored Motor Combo - amzn.to/3KOx4Hv
Castle 1721 2400KV Motor - amzn.to/3CJkvuK
AGFRC RC Gyros for RC Car Truck - amzn.to/3R774ZY
CNHL Batteries - bit.ly/3uwjgLt
GRP Tires - amzn.to/3RrW0GS
LED Lights - amzn.to/3PZhrh3
BSR Purple 1/8 Foam Tires - amzn.to/3AXOHRI
#Chinahobbyline
And make sure you subscribe to my channel!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting the channel so I can continue to provide you with free content. - บันเทิง
Have you got 2nd gear working now fella ?
I never had a Hobao 2 speed, but normally there's a little set screw in the new gears you have to back out to get it to shift earlier. Also sounds super lean to me.
Yea i did loosen it a bit on the second run. Have to mess around with it some more
Tighten the 2nd speed screw. And it's way outta tune. Start with more fuel and go from there. My opinion only
Keep the tank at exactly half full put it on a bench
It was running out of fuel on the low needle or both.
Set it on a stand and run it with the wheels free spinning
When reving it up with high blips of the throttle the idle should not hold high
If it does that’s the high needle to lean.
If you drive with small throttle blips and it cuts out or idles funny that’s to lean on the low.
Do the bench test
Idle high and set it rich enough it won’t hold high idle after a high idle rev
The idle should lay down after a high speed rev and hit the brake to stop the wheels from free spinning to avoid run on
Good luck bro Nitro for Life 🤘😎👊😊
Awesome, I'll trst that out. Thanks much brother 👊🏾
@@GregSupe at your service brother 😊👍
I am always here to help anyone who is into the hobby 🤘😎absolute man ya gots any ques just ask 🤘🤓
👊🏾
It's in 2nd gear for the start
Seems like it
Yo I have a hobao hyper SS cage with a dynamite .28 I want to go 2 speed do you know the parts that I need thx you
Think the patts list will br similar as what i have in the vid. You may have to do some mods to get it to fit though.
Check if the gear is on the shaft the correct way. It should have a one way bearing inside and you can lock it it second gear if you put it on backwards.
Was pre assembled.
@@GregSupe Either by accident by someone putting it together or done purposely for what ever reason. Some have been known to ship like that.
True
I was listening for it to shift I never herd it kick in!
Str8 frustration bro...LOL!!! Thing wont shift at all. It did shift under light acceleration at 5:38, which is pretty useless at that speed.
Stock clutch is weak on these, trust me - upgrade the clutch and you will hear it shift. As stock the clutch slips so you can’t hear it shift (it does change gear, just u can’t tell)
Yea I did swap to a aluminum clutch now but took back off the 2 speed. SO might have to put it back on to test it out.
@@GregSupe did you put thicker fuel lines on too?
@@exgtt2061 naw the ones I had worked fine
You'll figure it out and hit 60mph
Yeaaah
Dont trip. I got a hobo hyper gt w 2 speed gear box. Never had it shift ever and i have no idea why. Iv rebuilt the transmission etc many times. Nothing.
Same
@@GregSupe I read a comment once and the guy said he turned the shift disc the other way round and it worked but IV never bothered because I couldn't understand the physics of how it could be possible 🤷🏾♂️
Lol i just got a cheap two speed nitro instead.
@@GregSupe and I bet it worked better than the hobao 😂. My first nitro was 2 speed, £150 I paid and it worked like it was supposed to!!!