ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2022
- If you’re wondering how to connect the BH77 backhoe to Kubota L series tractors including the L2501, L3301, L3901, and maybe the L3302 and L3901, watch our friend Phil’s demonstration here. Be sure to check with your Kubota dealer for proper fit and instructions.
Here are some product suggestions. These are Amazon Affiliate links, so purchasing will help this channel by providing a small commission while not costing you any more. Thank you for your support!
AirTec Lube-Shuttle Pistol Grip Grease Gun Kit:
amzn.to/3O0pj1z
LockNLube Grease Gun Coupler:
amzn.to/3kPcvwu
Recommended Grease:
Valvoline Moly Fortified
amzn.to/3jNM1Kv
Nitrile Gloves:
amzn.to/34Kg8OG
Deerskin Gloves:
amzn.to/2I17NNy
My Video Gear:
Rode Wireless Go II microphone:
amzn.to/3eiJatG
Canon M50 Camera (now Mark II):
amzn.to/3vHW9uD
Battery adapter for M50:
amzn.to/2RshsBE
Sigma 16mm prime lens:
amzn.to/3vJDRcx
Sigma 30mm prime lens:
amzn.to/3epFneh
Variable ND filters:
amzn.to/3tmoHIs
This may apply to the B2301, B2401, LX2610, LX series, BX series, L series, MX series, M series, and even many other Kubota, John Deere, Mahindra, or other brands of tractors.
This video is intended for entertainment purposes only.
#MCGtube #MCGTV - ยานยนต์และพาหนะ
Oh yea Guys, did this Twice on my BH92 in SIX YEARS. The "simple conversion" only took me 72 minutes combined off - another 3 point attachment & backhoe back on, all together. My "Speed" Realy increased by just Buying TWO more TRACTORS. No more "make-work monkey-bussiness". Just can't waite to SEE the front loader Off & "Wheelee Championships " going on!
Practice makes perfect. New or dedicated machines help too! 😄
@@MyClutteredGarage Yes, they certainly do. Modern machinery is a great help; sure saves ALL the "back-breaking labor. I still am not afraid to do an hours worth of hand shoveling in the mud. Just saying "convert-a-lating" to a backhoe back-n-forth to a 3point "tool-carrier " takes WAY Too much time! Even especially when multiple tasks at hand take multiple "atachments". I like the small, medium,& large "Tractor Technique " ; it just costs 20,000 - 40,000 a crack. My back is worth that. I REALLY LIKE my telescopic lower lift link ends & telescopic sway bars ( two of the units);---anthing else is "add-ons" , tryed those Aka. "Quicky-links" is a pure excuse for safty & security. It has NEVER taken me more than 90 seconds to hitch & re-hitch 3 point implements---plus with the PTO shafts. Taking "link-arms " on & off & ON the Whole tractor AGAIN is for birds. Thank you for the great Vidio Sir and happy safe tractoring. Best wishes with all your endeavours.
Ed and Phil, Thanks for the tutorial, it shows how easy it can be to switch to the backhoe for those who are considering one.
Thanks Bob. I do wish I had one myself!
Easy is a relative term when it comes to tractor implements 🤣
Good morning...Phil could read 📚 books on tape because he has a very nice voice AND he is a wonderful teacher. Eddie, you should have Phil as a guest on your LIVESTREAM!!! You are a very good team. Thank you.
Hi Margaret. I agree. Phil is very good!
Thank you Margaret! You are very kind
Great job Ed...I felt like I was watching a PBS or Discovery show! Like you, Phil is a natural. Two thumbs up! 👍😎👍
Thanks, Chris. I don’t know about me, but Phil is definitely a natural!
Good Morning Sir, OUTSTANDING informative video about the procedure of connecting the BH77 Backhoe and maintenance on a Kubota L3301 Tractor ; ) Have a nice week end Sir Cheers !!!
Thank you, my friend!
Wow, that was very interesting to watch. Thanks Phil & Ed.
The fact that the backhoe was completely sitting on the ground was different & unique also.
You mostly seeing them being propped up by sitting on a 6"x8" wood block or on a rolling cart in a garage with concrete floor. Nice to know that is not the only way to park them. 😃 😊
Don't forget the BH77 is also used on the newer LX2610 & LX3310 tractors too.
Great video, Thanks!!! Dan
Thanks Dan. Good to know that it fits so many models!
I'm working on a lean-to roof on the barn right now. Once that's done, a better, long -term storage solution is on the agenda!!
Nice video I won’t let my bh77 watch this. I don’t want to scare it. Pry bar? No way!
Haha, thanks. A little gentle persuasion can’t hurt. 😄
This makes the BX23s backhoe hook up look so easy!
💥 Great video Ed and Phil!
*Keep on tractoring!*
Thanks Jon!
Forget the steal rod swing your main boom one way or the other that's how I line mine up
Great video! Thanks Phil and Ed! I do like that it has a second seat compared to the BX23s. Nicely done.
Thank you, Ross!
Hey Ed and Phil... I have the Green version. It’s so surprising how crazy similar they are. And how patient we have to be to hook them up no matter what it is on these crazy machines that we like so much. Good video Ed and Phil
Thanks BJ! The tighter the tolerance, the greater the frustration! 😄
Some days are better than others!!!
Very good instructional video. I have a backhoe on my Massey Ferguson GC2610. Some days the bh is cooperative and only takes a few minutes to install. Other days it can be stubborn and takes much longer. It all depends on the mood of the bh!
They can be brutal sometimes, whichever makes it even sweeter when it drops right in there
I also have the BH77 on my B3200
I didn’t realize it fits so many models. Nice!
Love the Tractor and the owner’s name 😃
Wish I could justify buying a backhoe
Every Phil should have a backhoe 😄
Nice!
Not one curse word. Amazing. Ha!
That's what editing is for 🤣🤣🤣
Only 30 something grease fittings? Great video guys!
You can leave the drawbar on the tractor if you slide it forward and put the pin back in the other hole.. gives you plenty of clearance
Great tractors and backhoes. I do not adhere to the myth that 3 point backhoes (which this is not) are bad for the tractor cases. I bought my second Kubota (30 HP B7800) over 17 years ago with the factory backhoe which is a 3 point attach and PTO pump. It takes me about 7 min to install and 5 min to remove. We also have a L2501 with this bh in the video. It is so difficult to remove and install, we never use the tractor as anything else. The subframe on the 7800 is massive and I have many hours of bh use on the tractor with never an issue.
Nice video!
Thanks Richard!
I believe on the drawbar he could push it in flush. It'd be one less thing to take off and store to the side. Also, get Phil a ratchet wrench 😉 Good detailed BH install video
Thanks Russell. Good tips!
I've got ratchets, but I keep the 14 mil in the toolbox on the tractor so I don't have to go hunting!!!!
AND……I thought you were going to tell us you upgraded to a bigger tractor!! 😀😀. I think installing a BH70 on a B2601 is a bit easier, but it does not have the 2nd seat. None the less, great video again. 👍👍
Thanks Jim. I could use a bigger tractor sometimes!
Interesting. I have a 4066R with a backhoe at the zoo and I think it is easier off and on. with the Deere you leave the three point hitch on. Nice video.
That’s really handy to be able to leave the 3 pt intact!
Also the lx series used the same backhoe.
Good video. When I saw the dirt floor the outrigger were sitting on, I thought when he goes to raise them and line up the pins they are going to dig a hole in the ground and slip. Surprised, how hard that floor is. I always unhook mine on a concrete floor now after going through hell with it sitting on gravel after the outrigger had settled to a flat position.
Thanks, Michael. I think a concrete floor is in Phil’s future!
And the BH77 will fit the LX 2610 and LX 3310
Appreciate getting right to the meat of the title of the video. Couldn't see every little thing, but got the general jist. Could you clarify how you are able to figure out the left and right sides of the 3 point and the correct direction when reinstalling?
I'm not sure, but I think they only fit one way. You can also mark them R & L when you remove them. Thanks for watching!
One more question, have you had the large pins slide out on you? Had one pin almost completely come out on me on one side, which could have been disastrous. There are small pins on these large backhoe attachment pins that go through the inside holes, but there isn't a mechanism to keep those little holding pins from coming out of there while working.
Ended up making quite the project out of it... get everything lined up perfectly should take 2 minutes... Next time you take it off put a block under the frame of the backhoe instead of leaving it lay on the ground... And leave the backhoe curled in a little closer instead of stretched out won't take so much to tilt it in place.. leave the pins of the backhoe off the ground above your hooks on the subframe easy Sneezy.. set the outriggers down take your block out and there you go
Might help with a flat concrete floor too?
@@MyClutteredGarage I do mine outside all the time no garage for this guy
It’s always easy, until you start recording how easy it is. Lol.
Question...
Did you have to change the standard sway bars on the three point hitch. I have a 3901 I want to add a bh77 to. So I'm gonna need to ensure there's plenty of clearance after the subframe is attached.
Hi Cliff. You have to remove the entire 3 point assembly to attach the backhoe.
My BH90x has two female hydraulic hoses rather than one male and one female. Any idea how to connect this to my Kubota L5740? Thanks
Was wondering if he ever found his 14mm wrench.
No 🤣
I just helped my dad do this with his b series and thought there must be an easier way. Turns out there isn't. He has a cab too so you can't see anything to line it up. It's like hitching a trailer without a camera
It helps to be on a concrete pad or flat ground. Some people make a dolly for the backhoe so you can move it into place. Thanks for watching! -Ed
Got the backhoe stretched out a little too far... Have a little better control with the curled in
I have a Kubota 3902 with a QH16 quick detach system for my implements. Would I be able to use a BH77 backhoe as a QD implement and not have to remove everything?
Hi Morrey. I'd check with a dealer on that. Thanks for watching. -Ed
Hi Ed, I have a question for Phil. Instead of removing the drawbar completely, could it be pushed into the pocket all the way in to flush position and pinned in place ?
Thanks, Dan
Yes, I push mine in instead of removing it
Thanks Gerry!
Yeah, I could. I'm just used to pulling it out. I should work on breaking that habit!!
2650 it will work on to I got one
Nice! Good to know!
Im too lazy to do all this ill just buy a mini excavator
If I had the money! 👍
You were lucky. sometimes this will take up to an hr if you are having bad luck esp if one of the hyd, hoses leaks. I always use a long bar and use the left and right movement and up and down of the buck to move the unit. A terrible design. I heard there is a quickconnect sys for this dreadful hookup. Ive had my L3400 for 13y and wish I have gotten the next size up but its been a champ for me for the last 13yrs.
Some folks use a dolly on a concrete floor. I’d imagine that would really help.
The things people do to their equipment to please these you tubers
You don't need to rush and tear up your stuff to please these people out here that's watching
Screw them