ฝัง
- เผยแพร่เมื่อ 28 มิ.ย. 2024
- Get ready to transform your home gym with the REP PR-5000v2, one of our best-selling power racks!
Note that assembly instructions are identical for the REP PR-4000 power rack.
Follow these step-by-step instructions, so you can start lifting in your new rack ASAP.
How To Assemble the REP PR-5000v2:
Step 1a) Build Right or Left Side on Ground (:40)
Step 1b) Build Opposite Side on Ground (3:40)
Step 2) Stand both sides up and install pull-up bar (3:30)
Step 3) Install Logo Plate (5:15)
Step 4) Tighten all hardware (bottom to top) (9:30)
Bonus Install! Weight Storage
Step 1) Loosen rear rack bolts (6:39)
Step 2) Install bottom crossmember to rear of rack (7:02)
Step 3) Install upright to bottom crossmember (7:20)
Step 4) Install top crossmember to rear of rack (7:34)
Step 5) Install weight horns (8:06)
If you run into any problems or questions while assembling your rack, email us at orders@repfitness.com and our awesome customer service team will help you out!
Visit: www.repfitness.com
Call: (720) 420-1731
Email: info@repfitness.com
Follow Us!
Instagram: / repfitnessequipment
Facebook: / repfitness
![อาจารย์ยอด : ลุงแว่วเล่าเรื่องผี [ผี]](http://i.ytimg.com/vi/Fd2Qsy4dqpM/mqdefault.jpg)
Video was a lifesaver as I'm putting together my PR-5000. Dan, couldn't help but think that you wouldn't have needed that step-stool if you and Matt had swapped roles while attaching the pull-up bar and logo plate!
Note to PR-4000 viewers: at 0:23 he mentions using "a 36 socket." I assume he means a 36mm socket which may be the case for a PR-5000 but for the 4000 you will want a 15/16" (or 23.83 mm) socket for assembly.
man thanks for that. I am headed BACK to lowes now...
Ah yes! Good tip. PR-5000 racks have 1 inch hardware, whereas the PR-4000 uses 5/8" hardware
After I watched the whole video i cant find what i need. I m glad I scrolled down to the comments. Thanks so much.
For the PR5000 V2 - 1" hardware, you can also use a "1 - 3/8" SAE socket, it fits on the nuts but not the bolt head.
Came here to say this!
Excellent video. Took me more time to unpack and clean the packing materials than building the rack.
The "Dan The Man" Interlude and Intro music is so epic! 🤣
I recommend using a box wrench instead of a crescent for the Logo Crossmember. A crescent wrench will not fit inside the cut out for the top hole on the Logo Crossmember, a box wrench fits perfectly.
Just assembled my PR-4000. This video made it pretty simple. Like another post, it took longer to remove everything from the packaging than it did to assemble. Thanks.
How long did it take you?
Awesome video. It looks like it's very high quality and easy to assemble!
Great video, made assembly a breeze. REP including a tool to reach nut in logo plate was a great addition.
Thank you for the video!!
Life saver! Watching this video it made 100000000x's better to install this. I just got the pr4000 and Lat attachment and it took me around 2 and half hours. I think it took me longer to see where I wanted to place the actual machine then to build it! Thank you! amazing video! Remember you need a 24mm socket for the pr 4000
My exact experience too! Haha. Actually breaking down all of the boxes was the biggest pain ;)
@@rebuildingrocketships So true! A ton of boxes! Did you get the front extensions? I did! I might return them if I can. this rack does not move at all.
@@Mexi99 I did along with the spotter arms, iso arms, lat / low, and two extra extension posts for weight storage. This rack ain’t going to budge without the front extension legs! I suspected it’s more of a hassle to return tho so I’ll hang on to them for a bit and if I don’t need / want them I’ll try to sell locally. I worry I’m going to trip over them 😂
@@rebuildingrocketships Yea i was going to return them but it's such a pain. %15 restocking smh. guess ill hold on to them lol
@@rebuildingrocketships Yea.. I'll probably try and sell my safety spotter arms and the front stabilizers. pretty much useless since i have the flip down safeties and getting hit with the 15% returning fee isn't worth returning at that poiint im losing money
Just got mine in. All blacked out. Such a beauty.
Nice video. That was a great tip to use the pull-up bar as a spacer for the bottom feet. You can also use 2x4’s cut at the same length as the pull-up bar in case the bottom moves. Or cut at 41-3/8” if you are getting the belt squat along with the power rack.This would be an 1/8” wider than the belt squat attachment and ensure a nice fit. For those getting the belt squat I would also suggest moving the bottom cross members as far up as possible. This will ensure alignment of the holes.
What is the correct amount of torque needed to tighten bolts on PR5000
Good video. I got the 4000 and am assembling it now. I don't have a helper so I'll assemble it on the ground and walk it up. Will see if that works.
I purchased the same. How did it go with no help??
This was a great help! Thank you!
It’s already been said but I’m here to reiterate. The 5000 rack might need a “36 socket” (36 mm) but the bolts for the 4000 rack use a 24 mm socket.
If you don’t already have this size socket at home (I did not) just take a bolt with you to the store to verify the size.
Thank you. Big help 4000 user here
I love seeing the 4000 in stock throughout the day. That tells me I'll easily be able to grab one when I'm ready. Blue uprights and gloss black crossmembers. Now I just need to start seeing the bumper plates or sport plates in stock. You'd think it'd be the opposite.
no longer in stock. LOL. I've been waiting to make sure I can budget for it the past 3 days...and on the day I was going to purchase.....NOT IN STOCK NO MORE :(
@@alexlee6993 check daily it's restocked a lot but the parts like safeties n attachments have been out of stock forever
The PR-4000 is in stock now at www.repfitness.com/strength-equipment/power-racks/pr-4000-series/pr-4000-power-rack. We'd recommend you act fact as this is one of our best-selling racks!
What’s up with the expansion bolt what can I use them for ?
I'm going to get one this month.
YESSS! Welcome to the REP rack club! What color are you going to get?
@@REPfitness you guys are out of stock on alot of things.
Could I technically lower the top crossmembers by like 3-4 holes? I have a 94 inch ceiling so I wouldnt be able to mount the multi grip pullupbar. I dont like the upside down mounted pullupbar since I want to be able to do ultra wide grip pullups. The 80 inch rack is too short for me to do standing OHP.
What size are those bolts..? 1 inch by 4 or 5 inches..?
Can I use a impact wrench to tighten everything down or will it dimple the metal?
You can I used my impact wrench no problem.
@REP do you recommend assembling the PR-5000 b4 adding the Aries (2.0) or should i wait to assemble all together?
Mine just got here woohoo
Oh boy! Happy REP Delivery Day!
When assembling should the numbers on the 4000 be placed facing me? And should this be done for all posts? I ask, as this determines where the holes end up inward or outward for bolting the bottom posts to the ground.
Please contact our team at info@repfitness.com - they respond in hours! (We also have chat for a near instant response)
i want that clear coat but oos
Does the PR4000 come with the locking washers? I don't recall having those with the PR4000.
The PR-4000 comes with nylon locking nuts (whereas the PR-5000v2 comes with split lock washers) Email info@repfitness.com with additional questions.
To everyone wondering when the item will be in stock I would reccomend buying the parts separately. You do pay roughly almost $100+ (i could be off on the math so my bad). Since everyone is making a gym garage/basement most if not all companies are sold-out/back-ordered but they do sell the parts separately still. Just don't make the same mistake I did and buy 8 crossmembers size 41" for a six-post-rack... make sure you have your rear crossmembers as a 16".... other than that I'm glad this video is available because I haven't seen anyone else put up an assembly for the PR-5000 v2.
More like end up paying $1000 extra in shipping
Great tip - We're excited that we're able to offer that option to buy the rack components individually. Not only does that allow you to get pieces as they come in stock during such high demand, but it also opens up the door for future upgrades to your configuration!
@@REPfitness 4real I've been doing that and I pretty much got all my equipment and by observing the ETA List/ IG Updates. Most of my equipment was shipped together. I just placed another order 2min ago 🏋🏾♂️🤙🏾
How much does the pr-5000 weigh?
I really don’t plan on bolting into the concrete so is there a way I can secure it without bolting? Like do I need plywood or something underneath and bolt into that? If so, what exactly should I get?
Also, when will the front foot extensions be back in stock in case I do need it?
I know this is an old comment and you’ve probably figured this out by now but for other people that may pass by this in the future here’s what I’ve found if you don’t want to bolt it down.
If you have the 41” rack it should be stable enough without the feet IF YOU ARE NOT going to lift outside the rack with safety spotter arms.
If you have the six post configuration, it’s supposedly sturdy enough to lift outside even without front feet, especially if you’re actually using the extension for weight storage. Still not sure I’d feel comfortable doing so.
The big takeaway is that with a 41” depth rack the real question is will you be squatting outside the rack with spotter arms? If no, you’re probably good to go. If yes, you probably at least want the legs.
The rear base stabilizer seems to only be needed with smaller configurations or with the lat pull-down/low row attachment.
@@anubis24354 What about a 30" and doing reps inside? Safe-ish? I am in a rental for a few months and cant bolt to the garage floor here.
The nuts are a bit different in the pr 4000 I just received. I'm assuming they are meant to eliminate the need for the locking washer but I can't seem to hand tighten them. Is this normal?
They are probably lock nuts - www.homedepot.com/b/Hardware-Fasteners-Nuts-Lock-Nuts/N-5yc1vZc2ez
I just ordered my PR-4000. What size sockets do I need to assemble that one?
Hey Jaymes! Email us at orders@repfitness.com and we'd be happy to help you out with any of your assembly questions!
Where do you begin tighten the wrack? I got the 5000 with weight storage just don't know where to start
Hey Brandon - drop us a line at 720-420-1731 or hit up info@repfitness.com and our team can help. Also - we have assembly instructions on our site - help.repfitness.com/article/76-pr-5000-v2-assembly-instructions
did they stopped selling that rear stabilizer? I don't see it on the website anymore.
repfitness.com/products/rear-base-stabilizer
or type in 'rear' in the search function on the top of the site.
I'm rearranging my home gym and what kind of tools do you use to take the pull up bar down? I'm putting a wall mounted cable pulley system up and moving my rep 5000 power rack.
Hey Johnny, best to reach out to our customer support team (phone/email/chat/text) at the bottom of our site and they can get back to you with specifics.
@REPfitness okay ty.
What’s the item number for the bolts
So the PR 5000 is the same as PR 5000v2. I built my rack at rep fitness its a pr5000. Iam a little confused I chose the 80" rack and 30" if I buy lat pull down attachment and stabilizer I won't need to bolt it down correct?? Will the rogue leverage arms work on this rack?
OK this is my dilemma.🙄
I currwntly have this set up PRX wall rack and separate valor lat pull down machine, separate rogue pull up bar, separate rogue band station with matador dip attachment and landmine (this is what I currently have right now) and many of other things.. I want the rogue arms so for that I will have to get another rack I think so I been looking at the one mentioned avobe..now if I get the pr5000 with lat pull down, rogue leverage arms, dip, land mind and pull up bar attachments I can sell all my other stuff and this way I will have everything consolidated in one rack..don't know if I will like everything cramped up in one place though🤔🤔. Or maybe just replace prx wall rack with rogue wall rack and keep everything else in separate stations like I have it now??🤔🤔
Hey Marco - I see your comments on a bunch of our videos. Hit us up with all the questions you have - info@repfitness.com or 720-420-1731 - we love talkin equipment.
Just assembled mine today. One issue: I can’t find a way to tighten the upper bolts for the nameplate, there’s not enough space for an adjustable wrench to reach the nuts inside of the nameplate. I have to order a 36mm wrench for them.
hey did you ever figure it out? I’m having the same issue
I used a pair of visegrips on the inside nut while I tightened the outside with a 36mm socket
I don’t see a how to install video of the athena functional trianer.
Honest question.. why do you need a 6 post set up for weight storage? That seems unnecessary. Cant you just put weight horns on the back posts of a 4 post setup?? Thanks!
Hey Joseph - it would interfere with the plates on a loaded bar when working inside the rack.
For a faster response, drop us a line here or give us a ring - Thanks! - repfitness.com/pages/contact-us
Can I set up in a sloped garage without leveling ? Looks like the base does not have any adjustments for unleveled flooring
You can use some shims (many stores sell them) to level out any uprights that may not hit the ground. It's also important to put the rack together with bolts loosened, find a spot you want to set the rack, then tighten them all down. This will help with keeping the rack level.
I mean there are not numbers on each side of my 4000, you guys need to put a sticker on that says left or right that'd make it easier
Can i order this in low ceiling version?
80" uprights are our shortest option for the PR-5000v2!
Do you guys have a ft-lbs torque to tighten the bolts to? Just got my 5000 v2. Mine came with no instructions.
Here are the instructions: help.repfitness.com/article/76-pr-5000-v2-assembly-instructions
As far as tightening the bolts, go a quarter turn past where it feels tight. Do not overtighten the bolts as you can bend the steel and these 1" bolts are secured with the washers as well.
@@REPfitness awesome thank you! I'll keep an eye on the tightening, I'm using a torque wrench so I'll start low.
@@grantf. What torque did you use? lol. I wish REP would figure it out.
@@bench175 it was 40 foot pounds. It seemed to hold everything snug without bending metal.
Can you carry all the boxes into a house down a flight of stairs by yourself ?
Uprights and crossmembers came in pairs in separate boxes. I was able to carry the boxes by myself. Boxes for uprights were the heaviest but doable.
0:25
The hardest part is the rep plate. If your floors are uneven of any measurement, good luck. 😂
"We do offer the rear base stabilzer"
No, no you dont. Its been out of stock forever and the eta date has changed like 20 times already. Latest was 2/2-2/8.....now 2/15. Can't wait to see it change again!
We understand the frustration here - unfortunately, we've had to update some of our ETAs due to unexpected delays in our supply chain. We update our ETA page daily to reflect the current situation based on these factors. Please email info@repfitness.com if you have additional questions.
It is in stock right now
@@nightroad102691 ordered it early Monday when it came back in stock. Thanks for the heads up though
I got my 6 post with front stabilizers, getting to start the assembly. do you know if I need to bolt the rack into the platform?
How tall is that giant jeez
Tall! Very tall!
How the hell do you install a 6-post rack!!!
Drop us a line - happy to answer any questions - repfitness.com/pages/contact-us
Iron workers always have the nuts up and out. Never down and inside.
Very disappointed in customer service for updates on orders that are 2 weeks late. Im missing part of my order, have not got a response for the reason
It’s NOT a 36 socket. It’s a 24. This video wasted me two tripes to the hardware store. Cmon Rep…
Dan is putting together a PR-5000 in the video, which uses a 36. The title includes PR-4000 because it's the same steps, but the PR-4000 does use a 24. Hope that helps explain that. Apologies on the double trip.
Really annoyed at the fact you said 36 socket… that’s no where near the size…. Way too big.
36mm is the exact size needed. I am building my rack right now.
It's 36mm for the PR-5000, but other commenters said the PR-4000 might needs something like a 24mm, if I recall correctly