Don’t let this distract you from the fact that Hector is going to be running three Honda civics with spoon engines, and on top of that, he just went into Harry’s and bought three t66 turbos with nos, and a motec exhaust system.
Hey did you climb 🪜 through the window 😅.me to. What ya doing. I was looking for a sandwich or something well since we're both here want hang out and drink Valvoline 80 wt.. I sure am thirsty. After a grease burger 🍔. U going back out window/ skylight. I might need help burger got me heavy 🪨 and hand slick from that drink. Want use the door 🚪..
With MacPherson strut fronts like what you have, if you can find a set of coilovers, they would have a two and a half inch spring on them that would give you more room without any spacers, you could also make your own coilovers by cutting off the spring perch from stock struts, and adding the sleeve with the adjusters and 2.5" spring. This is actually super easy to do right because you can buy a kit from a Honda that has the sleeves and adjusters, the springs won't be right but you can order the right springs from someplace like summit in the length and weight that would give you a good ride.
OEM YJ Jeep rims were called "Gamblers"- I remember having to find another spare when my wife bounced off a curb in icy weather. I've used spacers for decades on my Jeeps, as the OEM rims have crazy backspacing and require it for almost any time you upsize the tires.
Aluminum brightener is your friend. It's what makes unpolished aluminum look, well, so bright and clean. It's used on commercial trucks and boats, great for wheels.
Good stuff. Hopefully the bigger tires don't tax the engine too much or the clutch. A numerically higher set of differential gears would return it to stock like RPM's. But, I can only imagine that aftermarket parts are 'spensive and hard to come by for it.
I love the wildpeak at. I have those on our rav4 and I have the wildpeak ht on my Honda Pilot. Fantastic tires. Keep up this content. Also kudos for the tactical crocks.
Love the new project. Any plans to space out the rears to an equal amount and put some fender flares on? Might save you from a ticket depending on your local laws
I bought this exact Pajero earlier this year and I've daily drove it for several months now. Still get about 21.5 mpg despite the tire size. The guy I bought it from told me "some guy on TH-cam" had some videos about it. The left rear damage and the missing clear on the front right fender confirmed it's the same vehicle.
Even if they clear the springs sidewall flex means they still may rub being that close. Especially with small wheels and big offroad tires. Just keep an eye on them.
You should try to find some portal axles for it. It'd be ultra-super-mega-awesome and it would make space for the bigger tyres. I don't think anyone makes them for the mini-pajero but maybe you can use nissan ones with a little bit of tweaking. There may be some aftermarket ones for the jimny (which would come in handy given the simmilar size) and for most toyota models that could also be addapted to fit.
Bro those spacers aren’t hubcentric, they just have the correct centre bore diameter, which is better than the first ones I guess. Anyway actual hub centric spacers have a lip for the centre bore of the wheel to sit on. I’m liking the car content homie. Will be watching
Hell yea man, glad to see you got the car channel up and running. Give us a " the plan so far" video where you talk about the plans for this. I've never seen one of these or what they can be tuned up to. I never even took interest in any K-cars until yours when you talked about what made this one special. Will you be 3D printing any parts that are hard to find? lol honestly as a fellow car guy, I can see that being really helpful for the smaller and easily broken parts.
Discovered your channel because I wanted to know how a fleshlight would replace a brace.. I am also in to cars (aircooled Porsche and vw) Cool that you also mess with machines. Thats a cool kei for sure.
that shirt is based and foul at the same time and i love it, i think you know the one i mean. a song refrance, a kalashnikov with a drum mag, and the north hollywood shootout?! like... how could you not think thats awsome ima buy one and where it to school :D
I couldn't wait for my factory kicks to wear out to put a set of wildpeaks on my 2500 truck they are pretty sweet. Little noisy don't care just turn up the music louder. They will last forever just rotate them every oil change.
Love the stance, extra wide is a huge thing in the jeep world. Looks fat and I love it on the wanker. Spacers are fine just keep up on checking the torque more often. Fyi bigger tires like that will change your actual speed on the speedo. So use a GPS speedo on your phone so you can see how far off it is. Speedo will show 75 but you might be going 78 for example
Print s r,i like it. Thats what my samurai did same thing except it rub on leaf spring just a hair went to 235 75 15 mud terrain with nasty side lugs. Bought some them to uni took back.just don't cut all way to right just that extra little backspacing on rims we need . Hate using spacers something else break.some vehicle have bolt you adjust on steering arm to bottom out from turning . Hell u know that keep up great work .im go watch rest of nods video dad was getting out dr appointment when i was watching this morning and had go around block grab him up. Later ole buddy good luck on the little four by . That is sweet. Tores do it that what i was doing look .look would u look at that.oh yeah its losing speed.samy not winning any race unless its to top tree.lol.climbs like that old lady on stair chair. Up up and away.
I prefer wildpeaks over ko2. I always have balancing issues with ko2s and experience weird tread wear. My wildpeaks have been an excellent tire for me. the amount of negative offset you have will cause a lot of water from puddles or in heavy rain to distort your vision while driving. While not a significant issue, it is something to keep in mind.
Your intro put the size into perspective. If you sat in the middle you could adjust both side mirrors at the same time. Edit: spacers are brought to you by our sponsor KA......
shit dude i just watched your g17L video and I was searching for videos about the 95 pajero mini that is on the boat headed my way. You have good taste, like me
there is so much potential with this project and what I already can envision to be a dope secondary channel for automotive content. big question is though, do you plan on keeping your wanker in pristine condition as much as possible? If not I feel like a really cool project would be to get a cheap ass older truck meant to be beat around, mainly for offroad adventures and who knows... maybe make it some kinda technical?
Поддержать что-ли видео? Или не надо? Ну получилось вполне хорошо с Митсубиси. Жду видео с новым туториалом по созданию камуфляжа, только уже на полноразмерный ствол)
god damn that thing is awesome ... hahah i myself am a huge car nerd . i have a lot of 90's BMW's and VW's ...butt i alwayss loved the japanese cars. keep the car content rollin brother . Greetings from germany
Don’t let this distract you from the fact that Hector is going to be running three Honda civics with spoon engines, and on top of that, he just went into Harry’s and bought three t66 turbos with nos, and a motec exhaust system.
True.
Hey did you climb 🪜 through the window 😅.me to.
What ya doing. I was looking for a sandwich or something well since we're both here want hang out and drink Valvoline 80 wt..
I sure am thirsty. After a grease burger 🍔.
U going back out window/ skylight. I might need help burger got me heavy 🪨 and hand slick from that drink. Want use the door 🚪..
😆😂
2001 was a special time
When you're a fan of the original channel and find this video while shopping Pajero Minis.
I see this as an absolute win.
As a fellow pajero mini owner, I implore that you made a mini video with the pink gun 😊
With MacPherson strut fronts like what you have, if you can find a set of coilovers, they would have a two and a half inch spring on them that would give you more room without any spacers, you could also make your own coilovers by cutting off the spring perch from stock struts, and adding the sleeve with the adjusters and 2.5" spring. This is actually super easy to do right because you can buy a kit from a Honda that has the sleeves and adjusters, the springs won't be right but you can order the right springs from someplace like summit in the length and weight that would give you a good ride.
Been thinking about this lately. I cannot believe you got a pajero 2 doors!! 😢❤ you’re so lucky!! ❤
OEM YJ Jeep rims were called "Gamblers"- I remember having to find another spare when my wife bounced off a curb in icy weather. I've used spacers for decades on my Jeeps, as the OEM rims have crazy backspacing and require it for almost any time you upsize the tires.
Aluminum brightener is your friend. It's what makes unpolished aluminum look, well, so bright and clean. It's used on commercial trucks and boats, great for wheels.
The editing style with the car content is peak excellence
Dude I'm all in for the car content. I've never really been able to tinker with mine just yet so the more the merrier.
Loving the move.. Miss the old content but understand the issue at hand.. Will keep tuning in brother 🥂
Thanks. I’ll still be posting regularly on PSR too just as before.
Original channel fan and Suzuki Sidekick owner checking in, I approve of this vehicle and all of your content, keep it up buddy.
Heck yeah dude! Love the new content!
Good stuff. Hopefully the bigger tires don't tax the engine too much or the clutch.
A numerically higher set of differential gears would return it to stock like RPM's.
But, I can only imagine that aftermarket parts are 'spensive and hard to come by for it.
FUCK YEAH i absolutely love the car content,
also ive been running 35's on my rodeo with 1.5" spacers for years, absolutely no issues
your videos are oddly so calming bro. Thanks for posting!
Love the ingenious idea of reusing those rims, big brain move
Get that matching spare asap!!! Looks good!
I love the wildpeak at. I have those on our rav4 and I have the wildpeak ht on my Honda Pilot. Fantastic tires. Keep up this content. Also kudos for the tactical crocks.
Love the new project. Any plans to space out the rears to an equal amount and put some fender flares on? Might save you from a ticket depending on your local laws
I'm hyped for the journey of turning this car into a beast
I bought this exact Pajero earlier this year and I've daily drove it for several months now. Still get about 21.5 mpg despite the tire size. The guy I bought it from told me "some guy on TH-cam" had some videos about it. The left rear damage and the missing clear on the front right fender confirmed it's the same vehicle.
My main question during the beginning was does it rub during articulation. You did the right tests to show it doesn't. Congrats on the lift!
Put the big spacers in, looked epic
The pass-over clearance on any vehicle from Asia is always impressive.
Dude. You are my hero. When I grow up I want to be you. Please keep making videos!
Keep doing this! Trust me. It’ll grow.
Yeah, thats what I tell my wife.
I’m willing to bet they rub when you deflate on trails. Just a thought. Love the build!
the stance is great but it needs nice fender flares to complete it.
Had one when I was a teenager in Palau...man that thing was nice!
Hell yeah, Green Harbor Freight jack gang represent!!!!
Dude love that your doing some car stuff as well and with a kei car none the less kudos my friend keep it up
gorka 6 Bottom, quite swag. I love those little nissans. It is nuts how much character is in those guys
Print Shift Repeat is SUCH a dope name! Diggin it brotha, keep it up.
Even if they clear the springs sidewall flex means they still may rub being that close. Especially with small wheels and big offroad tires. Just keep an eye on them.
This lil monster is maaad sick.
When I heard you were going into car content I was so geeked, can’t wait to see more content man
You should try to find some portal axles for it. It'd be ultra-super-mega-awesome and it would make space for the bigger tyres.
I don't think anyone makes them for the mini-pajero but maybe you can use nissan ones with a little bit of tweaking. There may be some aftermarket ones for the jimny (which would come in handy given the simmilar size) and for most toyota models that could also be addapted to fit.
3:36 cutting would be needed is what i was thinking when you said "cutting it close".
Didn't even know you had car content until today. Now I just like you even more.
In the shop with the crocks you should print some spoilers and engine from printables I have a set for mine would go great with the new channel
new season of the off shoot,
Print, Skrrrt, Repeat looking good
235's rock! Great width for a light SUV
Heckin love the music for your intros! And the rest of the vid too lol
Bro those spacers aren’t hubcentric, they just have the correct centre bore diameter, which is better than the first ones I guess. Anyway actual hub centric spacers have a lip for the centre bore of the wheel to sit on. I’m liking the car content homie.
Will be watching
Also the Jeep wheels look dope on it.
Hell yea man, glad to see you got the car channel up and running. Give us a " the plan so far" video where you talk about the plans for this. I've never seen one of these or what they can be tuned up to. I never even took interest in any K-cars until yours when you talked about what made this one special. Will you be 3D printing any parts that are hard to find? lol honestly as a fellow car guy, I can see that being really helpful for the smaller and easily broken parts.
Discovered your channel because I wanted to know how a fleshlight would replace a brace..
I am also in to cars (aircooled Porsche and vw) Cool that you also mess with machines.
Thats a cool kei for sure.
"I love 3D printed Rocket Propelled Grenades" soundbite was f*cking hilarious.
Love your vids and glad see your back man! keep up the good work and stay safe man God loves ya
Finally something fresh out of TH-cam
that shirt is based and foul at the same time and i love it, i think you know the one i mean.
a song refrance, a kalashnikov with a drum mag, and the north hollywood shootout?! like... how could you not think thats awsome
ima buy one and where it to school :D
Lol the intro is lit made me happy hope you have a good rest of you day/night also keep up the fire vids❤
Tires look really good on the Pajero. Making them wider adds a more agressive look.
I couldn't wait for my factory kicks to wear out to put a set of wildpeaks on my 2500 truck they are pretty sweet. Little noisy don't care just turn up the music louder. They will last forever just rotate them every oil change.
His voice is so Deadpool 🤣
I wonder if he is trying to sound like Deadpool
when i first knew you got a pajero i love you even more ,no homo but im drive pajero too but a normal 2011 one.good vid
very impressive it fits so well without a lift kit
That looks sick
Love it. Consider adding an (oil catch can) for added reliability
For a second I thought YT unsubscribed me. Nope this is your second channel
Love the stance, extra wide is a huge thing in the jeep world. Looks fat and I love it on the wanker. Spacers are fine just keep up on checking the torque more often.
Fyi bigger tires like that will change your actual speed on the speedo. So use a GPS speedo on your phone so you can see how far off it is. Speedo will show 75 but you might be going 78 for example
I think you should go with the 7.5 millimeter spacers just for a little bit of piece of mind and some better clearance. But overall the mod is nice.
10/10 would watch again, quality content. more miata pls
Sick, bro. looks like a Micro Machine.
You can cut the saucer and raise it enough to clear the tyre.
Order another set of spacers for the back so it’s square all the way around will look so much better
Heck yes! Looks awesome! If ya had a bigger printer you could prints ya a wide body kit!
Love the video! More car content. I have the same exact tires of my Rav4! I love them
More car content 🙌🙌
3D Print parts for the cars. Cup holders and such.
Print s r,i like it.
Thats what my samurai did same thing except it rub on leaf spring just a hair went to 235 75 15 mud terrain with nasty side lugs. Bought some them to uni took back.just don't cut all way to right just that extra little backspacing on rims we need . Hate using spacers something else break.some vehicle have bolt you adjust on steering arm to bottom out from turning . Hell u know that keep up great work .im go watch rest of nods video dad was getting out dr appointment when i was watching this morning and had go around block grab him up.
Later ole buddy good luck on the little four by . That is sweet. Tores do it that what i was doing look .look would u look at that.oh yeah its losing speed.samy not winning any race unless its to top tree.lol.climbs like that old lady on stair chair. Up up and away.
I prefer wildpeaks over ko2. I always have balancing issues with ko2s and experience weird tread wear. My wildpeaks have been an excellent tire for me. the amount of negative offset you have will cause a lot of water from puddles or in heavy rain to distort your vision while driving. While not a significant issue, it is something to keep in mind.
I miss my Pajero SOOO MUCH!!
Awesome look, roof rack and snorkel next lol?
Your intro put the size into perspective. If you sat in the middle you could adjust both side mirrors at the same time.
Edit: spacers are brought to you by our sponsor KA......
It's may dream when I have mini I install same.❤❤❤❤
That thing looks sick with the thickies.
love the car content bro. keep it up
nice result, don't forget to weight the wheels
Get rid of those hib centric spacers. Those are the ones that brake wheel studs. Go with just a bolt on spacer like the black ones you have
shit dude i just watched your g17L video and I was searching for videos about the 95 pajero mini that is on the boat headed my way. You have good taste, like me
you gotta do some 3d printed mods for the car tho. like come on that would be banging
Wheel spacers are dangerous AF
I rolled my jeep down a 150’ canyon in Colorado mountains when my wheel fell off
Did you have hub centric spacers? Ive been running spacers for 6 years on my mustang havent had any problems
aeeeeee my dude is rocking tacti-crocks
you should bring it down to summit for the monday night cruise in on import night. will 100% win the door prize and 1st place with trophy in the show.
there is so much potential with this project and what I already can envision to be a dope secondary channel for automotive content. big question is though, do you plan on keeping your wanker in pristine condition as much as possible? If not I feel like a really cool project would be to get a cheap ass older truck meant to be beat around, mainly for offroad adventures and who knows... maybe make it some kinda technical?
Lol offset is very important. I ended up using 2 inch spacers on my Pajero Mini
Holy shit, that things a 5 lug? Put a couple hockey pucks above the coils to lift it like an inch and tune the thing. Itll be a certitifed ripper
fr tho come drive my skyline brah, GA ain't too far from WNC
Needs a snorkel as the cherry on top
Centerline champ 500s i love it
Probably need to fix the speedo for the new tire size
Daddy psr ❤❤❤ plz make an OF collab with Hoffman ❤❤❤
In Florida those are no where near far enough out need at least 2 more spacers
Do they rub when you air down? 🤔 personally I would have stuck with the 1" spacers... still looks good sir!
Yeah, those spacers looked mint. Definitely would have made it safer to drive
Поддержать что-ли видео? Или не надо?
Ну получилось вполне хорошо с Митсубиси.
Жду видео с новым туториалом по созданию камуфляжа, только уже на полноразмерный ствол)
Working on cars in the garage in Crocs (he just like me fr)
what are the measurements on the wheels and the front spacers you ended up with? Im looking at doing something similar on mine
god damn that thing is awesome ... hahah i myself am a huge car nerd . i have a lot of 90's BMW's and VW's ...butt i alwayss loved the japanese cars.
keep the car content rollin brother .
Greetings from germany
Fellow German, what beems and dubs (BMWs and VWs) do you have :)
great tires man