Gorgeous ride! I just threw some nitto nt555 G2's on my scat pack, I love the aggressive look. Running 315/35/20 on the rears, had to cut a little plastic from the inner wheel well to avoid rubbing, but overall it was worth!
Just did the same on my scat loving the aggressive look i didnt want to cut into i was hesitant on rolling the fenders but decided to pull the trigger on it looks amazing alot of clearance no rubbing
My buddy has 325 45 18s on a 10 inch rim on a 12 super bee charger. His tire did touch until it wore threw the plastic, but only on the passenger side. Other side is real close. That car has run 12.48 at 111 mph, with a tune, headers bigger exhaust and cold air and 180 temp thermostat in 3500 foot DA here in Western Canada. First time he had it at the track bone stock on street tires the car ran a best of 12.82 at 109 mph.
You probably figured it out but 20x11 +22 is the absolute perfect fit for narrow body challengers. You can run 305/35/20 with zero mods spacers or anything
Hi! It looks great! You can't tell me what springs you used (how many inches it is understated). What kind of disks are the standard ones from the manufacturer?
Hello, what is the widest tire I can put on my 2013 SRT8 Challenger 392, with factory 9.5” rims? The 245/45 on 20” rims is too small for the car. Why Dodge put 245/45’s on all 4’s is beyond me. But I definitely want to change to the widest tire I can put without changing the stock rims…front & back. Thanks in advance, for the input👍
@@gearedupkim9516 your welcome. I also hated the way the 245/45s looked on my 2011 rt with heritage wheels. And wanted big 315s. But I learned that the 275/40s are the best fit for a non widebody cars since the came from the factory like that for some reason and also because any 315/35s will stick out too much and I don’t recommend it, it will change the look of the car.
@@andershilbert8913 Awesome! Thank you So Much for that extra info…it goes a long way for me. I have always been about wider tires, (I love the look), although I would Not want to mess the car up in any way, or put WAY too wide on the stock rims. I want to keep the car as stock as possible. Thank you again! Mopar friend!
How much rear negative camber do you have and have you done anything to address that, it doesn't look like much when you show the rear viewing but it is there.
Hey bud great information. 2 years later... How is the tire wear on those rear tires? Did you need to do any additional work like camber adjustments or everything is still looking good?
What’s your front tire setup? I’m looking at getting eibach pro lowering spring but I’m not sure if the 295 40 20 will clear in front? Any help would be greatly appreciated.
Beautiful Challenger! I just bought these same rims based off your video. I went to have them installed on my completely stock 2019 Challenger Hellcat yesterday and got scared at what I saw. We test fitted the rim only up in the air and this same FR77 22 offset wheel stuck out what looked like about 1.5”-2” outside of the wheel well. I said that’s not gonna work so we put the original wheel back on. Again, the tire was not mounted yet. I have a picture but I don’t see any way to post it here. It’s scary looking up in the air. Anyway my question is, does it look that “drastically different/better” after the tires are mounted and lowered back down to the ground? Thanks for your video and help! Chris
On my car it sits just inside the the lip of the fender with the tire installed. It does stick out about 1.5 inches where the body curves inward down toward the bottom of the quarter panel. If you want send me your email and I'll take a few pictures of mine if it will help.
@@jaystepp150 Ha! Sorry just saw this a couple years later now lol. This is an old email account but anyway, yes we installed them and they worked out perfectly! Without a load and up I’m the air it did stick but they come back in when dropped back down. Sorry so late lol
How's the Wheel Spin? Still there huh? Great Ride! I'm searching for my 16 6spd... Not trying to go Drag Radial yet... Trying to go as wide as I can to hopefully suffice haha.. Somehow a Street Tire will Dead Hook rather than a Drag Radial.. Quite the wishful thinking huh :)
I have a 2018 challenger rt. I'm thinking about going staggered 20×9.5 in the front but not sure if I should go 20×10.5 or 20×11 in the rear. What's the best choice ?
I had a 2012 RT with 20x10.5 on the rear and they fit awesome. If you look my TH-cam channel you will see the car and the wheels. It's orange with a black hood.
I just picked up a new 2020 hellcat redeye widebody and this week it gets the same lowering kit you used I also have a set of 315 tires coming for it I have 305 all round now and I know my new 315 will fit but not sure on the front after I lower it? any idea?
@@kristieweston7867 Well pick her up few hours ago from Les Schwab Tire and they lowered it and stuffed my 315s tires on and I am happy to report NO rubbing at ALL front or back and NO spacers and she now looks low fat n mean...love it and thanks again for info
Cosmos on a hellcat is insane. I had them on my 2014 dodge charger SE charger super cheap tires. I wanna know how to reacted on here. I had 315/35/20 in the rear too. 😂
Why in the world would you put 315s on an SE? You would get better cornering, though 😂. It probably looked way better. I'll give you that. Once the car guys open their window and expect to hear a burble from a V8, they may think sleeper? 😂😂
Did u say you used spacers. If so, what size? I’m having the same issue with my 315’s. Rubbing where that little hump is at. Some guys are putting 3mm spacers on. I watched a guy bang that hump in with a sledge hammer. Made me sick to watch. Not doing that.
No spacers were used. Mine was really close to the plastic shield or inner fender well if you will. I used a heat gun to mold the plastic . I did cut the two tabs off at the end of the shield because it was very close to rubbing. You can't tell it's been modified at all. It is pretty close to the plastic but no rubbing so far. I have seen the spacers being used but I didn't want to go that route. Good luck with it!
Kristie Weston the drivers side the tire burned a Small hole into the liner where the hump is in the front inside area. There wasn’t much room there to press with the heat gun because of the metal on the inside of the liner. I have 11 inch rims 25mm offset. My finger can’t get between the tire and liner even after I used my heat gun. Going to take for a test drive shortly. I may try a 5mm spacer which is the max.
👂Listen up Challenger RT Scat Pack owners with stock 9inch wheels who are looking to upgrade your tires. Check out these, most bang for your buck tires. th-cam.com/video/Cz0w8Sw9dZM/w-d-xo.html m.tirerack.com/tires/tires.jsp?tireMake=Continental&tireModel=ExtremeContact+DWS+06&sidewall=Blackwall&partnum=74YR0DWS06XL&tab=Sizes Here's a review link you'll find very informative. th-cam.com/video/Cz0w8Sw9dZM/w-d-xo.html One hell of a set(4) of 275/40ZR20 tires with a tread wear warranty of 50K miles and a UTQG number of 560 all for about $900. Over 1K positive reviews. Remember these are "all season" not like most performance tires that are "summer only". Big difference. ☝️Probably the best Ultra High Performance All Season tire available, hands down. Also the 245/40ZR20 are available for a smaller two front tire option. ($215) Now if you have the wider 11inch wheels, and for a better grip & bite on the "REAR" only, recommend two of these. m.tirerack.com/tires/tires.jsp?tireMake=Continental&tireModel=ExtremeContact+DWS+06&sidewall=Blackwall&partnum=135YR0DWS06XL&tab=Sizes Again the most bang for your buck, "REAR" only. ($287) 315's Wow. 🇺🇲Stay well. Go in peace.
I have a 2023 Dodge Challenger 392 Sactpack, will your set up fit on my car, an what exactly is your set-up and what did I you do to make them fit,as far as to inside of thr wheel well. Send me an email at yeager650@gmail.com, please and thank you for your help.
Humble and right to the point, excellent information distribution.
Are those factory rims front and rear and can you fit 305 on rear.
Great looking Hellcat. Looks really good with the 315's 👌
Thank you,!
Did you have to use spacer for the rear? And whats the offset?
Gorgeous ride! I just threw some nitto nt555 G2's on my scat pack, I love the aggressive look. Running 315/35/20 on the rears, had to cut a little plastic from the inner wheel well to avoid rubbing, but overall it was worth!
How are they doung so far?? I’m thinking of getting some today.
So far so good. No issues
Le Guru what size rim did you go with on the scat pack?
@@danteblrmf304 for 315’s to run safely you’d need a 10.5 or 11 wheel
Just did the same on my scat loving the aggressive look i didnt want to cut into i was hesitant on rolling the fenders but decided to pull the trigger on it looks amazing alot of clearance no rubbing
My buddy has 325 45 18s on a 10 inch rim on a 12 super bee charger. His tire did touch until it wore threw the plastic, but only on the passenger side. Other side is real close. That car has run 12.48 at 111 mph, with a tune, headers bigger exhaust and cold air and 180 temp thermostat in 3500 foot DA here in Western Canada. First time he had it at the track bone stock on street tires the car ran a best of 12.82 at 109 mph.
Nice upgrade! Matches the wifey's charger.
beautiful car ... all you need is some mud guards to keep the rock chips down
Been looking for a video with explenations like this. Thanks for the info! You get to the point
This is a car guy. Welling to help and tell about his tires and wheels. Not like some that keep it a secret.
Fellow North Carolinian with a Cat 💪🔥
What a great stance!! Love the wheels!!
Damn that sounds good!!!!
Smart thinking using the heat gun and dremel tool.
If you don't lower the car, do you still need make space in the wheel well to fit these rims/tires like you did?
I would like to know this as well
I doubt it I had 315/35/20 on a dodge charger SE 2014 the same tires he’s running on his hellcat 20x9.5 wheel.
With the +22 offset, did you require actual spacers? My 2021 HC is not lowered but I’d like to have 11” rear wheels myself. Thanks.
You probably figured it out but 20x11 +22 is the absolute perfect fit for narrow body challengers.
You can run 305/35/20 with zero mods spacers or anything
Hi! It looks great! You can't tell me what springs you used (how many inches it is understated). What kind of disks are the standard ones from the manufacturer?
Awesome looking Hellcat.....very nice tire and wheel setup.....cool vid subbed 👍👍🏽
Hell I've had nitto 315/30/20 and 235/30/20 on my 2010 rt for 2 years with 2 inch lowering springs all around and no spacer no problem
Hello, what is the widest tire I can put on my 2013 SRT8 Challenger 392, with factory 9.5” rims? The 245/45 on 20” rims is too small for the car. Why Dodge put 245/45’s on all 4’s is beyond me. But I definitely want to change to the widest tire I can put without changing the stock rims…front & back.
Thanks in advance, for the input👍
275/40r20
@@andershilbert8913 Thank you👍
@@gearedupkim9516 your welcome. I also hated the way the 245/45s looked on my 2011 rt with heritage wheels. And wanted big 315s. But I learned that the 275/40s are the best fit for a non widebody cars since the came from the factory like that for some reason and also because any 315/35s will stick out too much and I don’t recommend it, it will change the look of the car.
@@andershilbert8913 Awesome! Thank you So Much for that extra info…it goes a long way for me. I have always been about wider tires, (I love the look), although I would Not want to mess the car up in any way, or put WAY too wide on the stock rims. I want to keep the car as stock as possible.
Thank you again! Mopar friend!
@@gearedupkim9516 glad to help!
Dont you lose suspension tension when you lower the car with springs?
Beautiful Beast!
Very nice! Will it work on a 10 inch rim?
Got exact same set up never have rubbing at all
can you tell me the difference between 245/45R20 103w vs 255/45R20 105w. I have 17s on my challenger and I want to upgrade to a low profile set of 20s
I know it's late but I run 255 front 275 rear with nittos. Went from 18 to 20 9.5 american muscle rim. Love it
Is there any noticeable difference in the sidewall height between the front 275/40r20 and rear 315/35r20 tire?
Same size
nice. I got an RT on sportlines im going to go for this.
How much rear negative camber do you have and have you done anything to address that, it doesn't look like much when you show the rear viewing but it is there.
There is a small amount of negative camber(maybe a degree or two), but nothing that had to addressed. Over 3 years with no issues.
Hey bud great information. 2 years later... How is the tire wear on those rear tires? Did you need to do any additional work like camber adjustments or everything is still looking good?
No additional adjustments. Everything still looks good!
@@kristieweston7867 Thanks bro👍🏼👍🏼
Who installed your lowering springs on your car? 9:44
Looks good
Hey I have a 11" rim for the rear with a +27 for my 18 Charger Rt do you think I'll run into any issues
Very informative video
What’s your front tire setup? I’m looking at getting eibach pro lowering spring but I’m not sure if the 295 40 20 will clear in front? Any help would be greatly appreciated.
It's the stock rim with the 275 tire. A 295 would be real close!
Beautiful Challenger! I just bought these same rims based off your video. I went to have them installed on my completely stock 2019 Challenger Hellcat yesterday and got scared at what I saw. We test fitted the rim only up in the air and this same FR77 22 offset wheel stuck out what looked like about 1.5”-2” outside of the wheel well. I said that’s not gonna work so we put the original wheel back on. Again, the tire was not mounted yet. I have a picture but I don’t see any way to post it here. It’s scary looking up in the air. Anyway my question is, does it look that “drastically different/better” after the tires are mounted and lowered back down to the ground?
Thanks for your video and help! Chris
On my car it sits just inside the the lip of the fender with the tire installed. It does stick out about 1.5 inches where the body curves inward down toward the bottom of the quarter panel. If you want send me your email and I'll take a few pictures of mine if it will help.
Kristie Weston I’ll send you the pic of mine also and maybe you can tell me if that’s about right
So what happened? Did it work out?
Was it because the independent suspension was dropped down, making it seem worse than it actually was?
@@jaystepp150 Ha! Sorry just saw this a couple years later now lol. This is an old email account but anyway, yes we installed them and they worked out perfectly! Without a load and up I’m the air it did stick but they come back in when dropped back down. Sorry so late lol
How's the Wheel Spin? Still there huh? Great Ride! I'm searching for my 16 6spd... Not trying to go Drag Radial yet... Trying to go as wide as I can to hopefully suffice haha.. Somehow a Street Tire will Dead Hook rather than a Drag Radial.. Quite the wishful thinking huh :)
I like your Lic plate LOL !!!
Any pics of the wheel wheel without the wheel installed?
Hi. Will it fit 305/45/20 on the rear and 275/45/20 on the front, for my rt challenger 2013?
I have 295/35/20 on the back of my hellcat charger
I think 305 on the rear end is the sweet spot.
So is it possible to add 315 to the rear on my narrow body challenger rt
I had 315 on my challenger rt also.
How did the car perform with that setup? Thinking of running 315 on the rear of my widebody but I'm hesitant because it's lowered
Mine is also lowered and have had no issues . It did help tremendously with traction.
@@kristieweston7867 awesome 👌
Looks amaizing...✌️
Sounds great too. What is your exhaust setup?
Dynomax race bullets with rear deletes
@@kristieweston7867 Thank you.
How have the eibach lowering spring been ?
I have a 2018 challenger rt. I'm thinking about going staggered 20×9.5 in the front but not sure if I should go 20×10.5 or 20×11 in the rear. What's the best choice ?
I had a 2012 RT with 20x10.5 on the rear and they fit awesome. If you look my TH-cam channel you will see the car and the wheels. It's orange with a black hood.
@@kristieweston7867 Thank you
What type of tires do you have on your Challenger ?
Nice car🤙
I just picked up a new 2020 hellcat redeye widebody and this week it gets the same lowering kit you used I also have a set of 315 tires coming for it I have 305 all round now and I know my new 315 will fit but not sure on the front after I lower it? any idea?
Being a widebody, 315's shouldn't be an issue.
@@kristieweston7867 Well pick her up few hours ago from Les Schwab Tire and they lowered it and stuffed my 315s tires on and I am happy to report NO rubbing at ALL front or back and NO spacers and she now looks low fat n mean...love it and thanks again for info
What is your offer set for the wheels
Cosmos on a hellcat is insane. I had them on my 2014 dodge charger SE charger super cheap tires. I wanna know how to reacted on here. I had 315/35/20 in the rear too. 😂
Why in the world would you put 315s on an SE? You would get better cornering, though 😂. It probably looked way better. I'll give you that. Once the car guys open their window and expect to hear a burble from a V8, they may think sleeper? 😂😂
Thanks for the info. I think I’m going to try this figment on my V6
Mister Filmz that’s kinda pointless on v6
Yeah Austin Gruszecki. But the most you can do is make it look good
I have this color set up down to the yellow brake caliber.
Did you use spacer?
Do u have to run a spacer to make it work I have 2018 charger also wanna do the 20x11 on the back with either 305 or 315
I did not have to use a spacer on mine
@@kristieweston7867 thanks
you have a lot more clearance on your charger than us challenger guys do. you could run 305’s and 315 safely with no problems
What size are you running on the front? And are they the stock rims or aftermarket?
Front are 20x9.5 stock front 11" rears
Sick bro :)
Link to the rims website?
What are the tire specs at front?
What are the front wheels setup? Are they 20×11 as well?
Won’t fit most likely 20x9.5
Would he be interested in filming
Filming the car?
@@kristieweston7867 yes , for my youtube, review on his car ! I own a Original SRT8 charger
I'm sure he would do that. Where you located?
@@kristieweston7867 Raleigh
Whats the offset of the rear wheel?
What size tires and wheels are on the front of the car?
20" x 9.5" wide and the tire size is 275/40ZR20 .... they are the stock wheels and tires
Did u say you used spacers. If so, what size? I’m having the same issue with my 315’s. Rubbing where that little hump is at. Some guys are putting 3mm spacers on. I watched a guy bang that hump in with a sledge hammer. Made me sick to watch. Not doing that.
No spacers were used. Mine was really close to the plastic shield or inner fender well if you will. I used a heat gun to mold the plastic . I did cut the two tabs off at the end of the shield because it was very close to rubbing. You can't tell it's been modified at all. It is pretty close to the plastic but no rubbing so far. I have seen the spacers being used but I didn't want to go that route. Good luck with it!
Kristie Weston the drivers side the tire burned a Small hole into the liner where the hump is in the front inside area. There wasn’t much room there to press with the heat gun because of the metal on the inside of the liner. I have 11 inch rims 25mm offset. My finger can’t get between the tire and liner even after I used my heat gun. Going to take for a test drive shortly. I may try a 5mm spacer which is the max.
@@cgkuch4184 Is this on a Hellcat or different model? Let me know how it turns out. I'm curious in a similar setup. Thanks and good luck
What size spacers did you use?
No spacers were used.
What's the web page for the wheels ....thanks
The rims are 20x11 Hellcat Replica HC2 and they were ordered off Ebay. Factory Reproductions
Can these wheels and rims fit a rt challenger?
They should work on the R/T
Hi there!!
What’s the offset on the rear?
+22
Kristie Weston Thanks 🙏
Are they 20×11 in the rear?
Yes they are 20×11
Hey where’d u get me stripes done frim
They are costumed painted.
How low did you lower your car ?
Eibach sport line springs. To control the camber, I used adjustable tubular A-arms.
👂Listen up Challenger RT Scat Pack owners with stock 9inch wheels who are looking to upgrade your tires. Check out these, most bang for your buck tires. th-cam.com/video/Cz0w8Sw9dZM/w-d-xo.html m.tirerack.com/tires/tires.jsp?tireMake=Continental&tireModel=ExtremeContact+DWS+06&sidewall=Blackwall&partnum=74YR0DWS06XL&tab=Sizes Here's a review link you'll find very informative. th-cam.com/video/Cz0w8Sw9dZM/w-d-xo.html One hell of a set(4) of 275/40ZR20 tires with a tread wear warranty of 50K miles and a UTQG number of 560 all for about $900. Over 1K positive reviews. Remember these are "all season" not like most performance tires that are "summer only". Big difference. ☝️Probably the best Ultra High Performance All Season tire available, hands down. Also the 245/40ZR20 are available for a smaller two front tire option. ($215) Now if you have the wider 11inch wheels, and for a better grip & bite on the "REAR" only, recommend two of these. m.tirerack.com/tires/tires.jsp?tireMake=Continental&tireModel=ExtremeContact+DWS+06&sidewall=Blackwall&partnum=135YR0DWS06XL&tab=Sizes Again the most bang for your buck, "REAR" only. ($287) 315's Wow. 🇺🇲Stay well. Go in peace.
I can’t believe these cars run a 20” wheel and a 35 series tire lol.. no wonder they are 4300lbs haha.. tire is like a truck tire side almost haha
315mm is 12.4in not 11…limit tire supply and profile
I like smoke em tag. lol
I have a 2023 Dodge Challenger 392 Sactpack, will your set up fit on my car, an what exactly is your set-up and what did I you do to make them fit,as far as to inside of thr wheel well. Send me an email at yeager650@gmail.com, please and thank you for your help.
speak up
Sounds like crap
do you have spacers on the rear ? how thick are they ? 1" ?
No spacers!
What tire size you have in the front ?