From start to finish that was great, seeing the hammer evolve , and talking of evolving, if thats what you do at 19, you'll be up there with the best of them in no time. Well done and keep them coming. Thanks for sharing.
Beautiful tool. Consider using a spoke shave to shape the handle following the draw knife. It will save a lot of sanding time and allow more control over the final shape.
What are you chasing and what will you do when you catch it ? Question on your burner.. thinking of making one, most others cast them using a refractory. what sort of lifespan do you expect from just using steel?
That is a really great looking hammer. What exactly is a chasing hammer used for? My first guess is something a custom body shop would use for super detailed design and work.
Nice job, Does the PP need to be so visible? Next you will be writing it on everything, just like that Diresta guy. Thats how it starts, a few initials here and there....
Very nice. What alloy do you recommend for a hammer? I sure would like to see the power unit you use for your hydraulic press. I'm trying to build one but I'm kind of shooting in the dark as far as any knowledge past the principles. Thanks for putting this video up.
That would be cool to let us know the use of each tool that you make like this hammer cause... Well i, and i thik I’m not the only one here, have no idea of what the purpose of that particular shape is! Great video anyway 😉
A bit late, but a chasing hammer is used to hit engraving chisels. Engraving is also known as chasing, and the large striking face means you can watch the tip of the chisel on the piece, not the hammer when you strike.
I have I hammer just like that! , your forge needs some repair on the front , next time you build one weld flat bar around the hole so the sheet metal does not degrade as fast.
![เปิดบ้าน นาราเครปกระเทย 1 ไร่ ขายขาดทุนหลัก10ล้าน เอามาใช้หนี้!!! l [Nickynachat]](http://i.ytimg.com/vi/0jz84VFWVP4/mqdefault.jpg)
beaux travail de forge ! mai des progres a faire dans l ajustage des manches en bois . merci !
From start to finish that was great, seeing the hammer evolve , and talking of evolving, if thats what you do at 19, you'll be up there with the best of them in no time. Well done and keep them coming. Thanks for sharing.
Thank you! I really appreciate it👊👊
Wait. Is Paul genuinely 19?
Very nice work. It's a real pleasure to watch you progress in your craft.
Very nicely done
Thank you!!
Nice maker hammer, loving the shaped ends of such specific specialty to us. thank you for the share, Lance & Patrick.
Thank you! I’m glad you liked it!
Well done!
Great Job Paul. You really show up that braggart Brit!
Thanks for taking on building me a drawknife. I can’t wait.
M. M.
Thank you! No problem
Very well done Paul, beautiful hammer
Thank you!!
Great looking hammer and great job making it
Enjoyed and gave a Thumbs Up also
Mad Skills. Great Job! 1 million subs not to distant future.
Thank you! I appreciate it👊👊
Really like this Paul, one of my favourites. Your craftsmanship always show, but this is exceptional.
Beautiful tool. Consider using a spoke shave to shape the handle following the draw knife. It will save a lot of sanding time and allow more control over the final shape.
Thank you! I have tried it before but I can do it much faster on the belt grinder
Love to watch your work. You put so much effort into detail. You do as good and better than most in your profession. Keep up the good work. 👍👍👍
You do nice work, buddy. Thanks for sharing.
Well done again
Thanks!
That's a gorgeous Fisher ( ?) anvil. Mime is a 53 pounder .
that is one beautiful little hammer. Love your videos!
Thank you!!
Awesome as always Paul 👌🏻 thanks so much!
Very nice.
Parabéns pelo trabalho e por mãos de artesão. Valeu.
Magnific 🔨
this hammer looks great.
Always impressed
Thank you👊👊
Nice video. Beautiful hammer. Thanks for sharing! : )
Thank you!!
Beautiful work and video :)
Thank you!
Great Jop, beautiful work...
Thank you!👊
Beautiful hammer. Love ur work
Thank you!!
What are you chasing and what will you do when you catch it ?
Question on your burner.. thinking of making one, most others cast them using a refractory. what sort of lifespan do you expect from just using steel?
That is a really great looking hammer. What exactly is a chasing hammer used for? My first guess is something a custom body shop would use for super detailed design and work.
Nice job, Does the PP need to be so visible? Next you will be writing it on everything, just like that Diresta guy. Thats how it starts, a few initials here and there....
You’re right it takes away from the hammer. I’m going to stop using it hahah
very nice mate, what is a chasing hammer used for ????
Always wanted to chase things with a hammer
Running away bothers them plenty too.
Magnificent.
Thank you!!
👍🏻приятно наблюдать за трудом мастера!
⭐️⭐️⭐️⭐️⭐️
Very nice. What alloy do you recommend for a hammer?
I sure would like to see the power unit you use for your hydraulic press. I'm trying to build one but I'm kind of shooting in the dark as far as any knowledge past the principles.
Thanks for putting this video up.
Thank you! I use 1045 and I have a whole video on how I built my press if you want to check it out!
great video as always could you please tell me the cfm of your blower ? I built my version of your forge but cant get welding temps. thanks
Muito bom!!! Obrigado!!!
That would be cool to let us know the use of each tool that you make like this hammer cause... Well i, and i thik I’m not the only one here, have no idea of what the purpose of that particular shape is! Great video anyway 😉
A bit late, but a chasing hammer is used to hit engraving chisels. Engraving is also known as chasing, and the large striking face means you can watch the tip of the chisel on the piece, not the hammer when you strike.
@@fnordfnordsson4385 chasing an repoussé is not the same as engraving.
oh the cookies are ready 6:10
Hello. what steel do you make hammers?
All done beautiful craftsmanship 👍👍👍👍👍 just out of curiosity do you sell any hammers you make ? God bless you family and friends
He has a whole website
@@andrewbeegle6021
Thank you very much you know the name of the website by any chance ?
Paulpintoblacksmithing.com
Paul is making me a drawknife now. Great guy to work with.
The website is also in the video description for a clickable link.
Красивый молоток! Вы большой молодец!!
Nice
Thanks!
I have I hammer just like that! , your forge needs some repair on the front , next time you build one weld flat bar around the hole so the sheet metal does not degrade as fast.
Again nice build sir! Are we going to see some chasing / repousse in the near future?
👏👏👏👏👏👏
The only problem with your hammers is they are just too nice. To be blunt, nobody steal an ugly hammer.
Thank you for sharing.
Chasing hammer?
Maestro buenos días qué buen trabajo ha hecho con el martillo regalamelo
Hit a hammer with a hammer to make another hammer
A true beaut #Tremendous
Thank you!!
👍👍👍
ВЕЩЬ!!
ممتاز جدا 👍👍👍👍👍👍👍👍👍🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🎓🎓🎓🎓🎓🎓❤❤❤❤❤❤❤❤👏👏👏👏☺
👍
I would love this vid if it is done without music.
Use music name
not a fan of punching lube?
👌👊👊👏👏👏👏👏👏👏👏👏👏👏
👍🏻👊🏻
👊👊
ещё бы на рукоять выжечь свой знак!
V