My guy, I don’t even do hvac at all but I enjoy the videos! I learned a lot about all of the different cooling and heating methods from your videos. A lot of good info and just a good watch and you’re built like a brick house 😂 moving to many fan motors on your own lol
I had one like that in a nasty crawl space full of water and mud. Took me 6 tries to get it about drove me crazy but it was hot as hell outside coil was under warranty but a couple weeks out. I finally got it but was back in a couple weeks pulling it out which was even worse because installers put the coil about 16” away from a beam so it was hard as hell to get out lol gotta love it.
I've found using a vacuum pump and a ¼" hose helps with aluminum repairs. The oil residue is what makes it more difficult. Pulling a light vacuum helps to draw it in after cleaning the oil on the outside and inside, using a nitrogen purge. About 100-125 psi purge. Faster flow goes right over the oil and doesn't pull it out as well. Just my experience with aluminum coils, joints and repairs. Heck, I've even in an emergency repaired aluminum pilot tubing for boilers and RTU'S, especially the Yorks with those aluminum pilot tubing and the one that runs down towards the burner with the orifice and small opening that light the pilot. York Sunlines is what I'm talking about.
My guy, I don’t even do hvac at all but I enjoy the videos! I learned a lot about all of the different cooling and heating methods from your videos. A lot of good info and just a good watch and you’re built like a brick house 😂 moving to many fan motors on your own lol
Glad you enjoy the videos.., I feel more like an outhouse though 👍
Awesome work.! Yes hot down here this weekend. I sweated along with ya welding this weekend.
Nice Fall weather
I had one like that in a nasty crawl space full of water and mud. Took me 6 tries to get it about drove me crazy but it was hot as hell outside coil was under warranty but a couple weeks out. I finally got it but was back in a couple weeks pulling it out which was even worse because installers put the coil about 16” away from a beam so it was hard as hell to get out lol gotta love it.
Good job not giving up… the heat just compounds the pain in the butt jobs like that.
So that coil is not under warranty i guess since you did the repair good fix
It still has warranty but Dealers don’t work Sundays … it was repairable this time. Thanks for watching as always 👍
Good troubleshooting brother great find , I have a few videos uploaded troubleshooting these
It’s a shame the coils leak like this
Pack your pruning shears. Customers don't understand what minimal clearance means. Thxs for the vids!
Yep, HOA doesn’t care as long as they can’t see the ac yet they installed them all in the front.. makes sense. Thanks for watching!
It's good, man
Says it right on the front.
Also, you guys are brave finger banging contactors. I been bit by that before
I didn’t feel anything 👈😀
Great video!
Thanks for watching!
Nice repair. I prefer using AL-822 w/ propane. I have yet to burn a hole.
I’ve had success with the 822 too, Thanks for watching!
@@briancarlisi2224 or mapp gas
Great work Subcool. Aluminum coils suck.
Yep, bring back 80’s coils
Thanks for the video.
Likewise, Thanks for the daily dose.
I've found using a vacuum pump and a ¼" hose helps with aluminum repairs. The oil residue is what makes it more difficult. Pulling a light vacuum helps to draw it in after cleaning the oil on the outside and inside, using a nitrogen purge. About 100-125 psi purge. Faster flow goes right over the oil and doesn't pull it out as well. Just my experience with aluminum coils, joints and repairs. Heck, I've even in an emergency repaired aluminum pilot tubing for boilers and RTU'S, especially the Yorks with those aluminum pilot tubing and the one that runs down towards the burner with the orifice and small opening that light the pilot. York Sunlines is what I'm talking about.
I’m just glad it was leaking where it was, just sad what’s happening to quality these days. Goodman was better in the Janitrol era .
Finger pump down, real life right there!!!
👉 Just don’t touch the parts that bite
Sweat purge and roll baby
Oh yeah 👍
What state are you in?
FL
You probably should have used a mapp gas torch instead.
Thanks for Watching
Goodman and Lennox coils are crap
Unfortunately true