3D printed UAV - Pathfinder build video
ฝัง
- เผยแพร่เมื่อ 19 พ.ย. 2023
- Read more: www.eclipson-airplanes.com/pa...
Eclipson Pathfinder is a cutting edge twin engine 3D printed FPV platform. Optimized for "vase mode" for unparalleled printability and quality with LW-PLA. The Pathfinder is compatible with most FPV systems on the market, ensuring seamless integration of your preferred equipment. Its low drag design ensures optimal performance in the skies. Equipped with centre landing gear and flaps for easy and slow landings, while improving stalling characteristics, it is an ideal choice for pilots of all skill levels.
Boasting a large battery bay to accommodate various mid to long-range battery setups, this plane is perfect for extended flights. Furthermore, wing-bays on each side allow you to place electronic components, such as GPS and RX, to help prevent interference.
Experience the thrill of flying with ease and precision as you soar through the skies with this exceptional 3D printed plane. - วิทยาศาสตร์และเทคโนโลยี
The best building design concept so far!! The structural philosophy is a milestone in the 3D airplane printing market!
I prefer red planes…
@@user-otzlixr Welcome!! Could you post something about what you are saying and a link for a sample? The red plane seems like "origami stuff", doesn't it? Best wishes!
@@marcoaurelioxaviermoreira4631 I will evaluate the technical feasibility of your request and get back to you within 30 rotations of earth.
Can I use a Crayalty k1 printer in the three-dimensional aircraft industry?
It looks like there an mistake at 2:15. The wing mounts are being glued into the wing. They are being put in upside down. The larger hole needs to go at the top (toward the bottom of the wing) as we're looking at the installation. This larger hole accepts the head of the bolt. Also, the shape of the wing mount only goes in one way flush. The thicker end of the wing mount with the larger hole points up. The wing mounts are also angled.
If you're using ESCs with BECs then remember to remove the red wire from one of the throttle leads.
Genial como siempre!!!
Is this able to be scaled down while keeping the original electronics
sweet! btw, where did you buy the Z shape pliers for bending pushrods?
You can find it in many places. Search for: "Z bend rod tool"
a mod for esc places next to motor, might be interesting maybe?
no spar to strengthen the body-tail connection?
That was the first option, but there was no space to place the ESC. No CF spar needed, the body has a relatively new 3D printed structure which makes the use of CF reinforcement.
what's the name of the FPV camera y used bro ?
great build
DJI O3
@@eclipsonairplanesGreat design, would love to print but have no knowledge about how to integrate an FPV system. Would you be able to offer guidance on what else you would need to buy to use the DJI 03 and how you would go about wiring it up? Ideally I would like to be able to use a giro also, is this something you would be able to offer assistance with in regards to how to do this? Many thanks.
Would like to see videos on your printer settings with tips and tricks.
Are you using LW PLA or Tough PLA?
LW-PLA on this one
The gcodes Eclipson has with their models have worked really well with my Prusa mk2.5S. And I think those are actually for Ender 3.
I really like the design of this plane. I might build one.
How well does it glide? (at 0% throttle), and
What are the flight times on a 2200 mAh 3s ?
Glide ratio is around 20. You can fly like 18minutes with that battery.
Saludos y excelente trabaajo, ¿esos diseños se pueden modificar?
Gracias. Si sabes usar algún software de diseño si.
Hi, which flight controller is used in the video? Thanks
F405 mateksys
Did you simply drop the battery inside without velcro or straps?
Velcro works well to secure everything in place.
PATHFINDER great new model
I really like the new style in which you make airplanes, I bought a Helix and I want to buy this model, tell me what brand of LV-PLA filament you use?
Glad you like it ;) Colorfabb
@@eclipsonairplanes Colorfabb LW-PLA-HT high-temperature version?
@@dronyri We used the normal one. just LW-PLA
Ekibin Türk olması çok iyi
can i print this with lw pla in bambu slicer?
Yes
How do you get no stringing with lwpla?
Vase mode design. No travels
@@eclipsonairplanes @0:21 there are 2 parts printing at the same time. How is that possible in vase mode? Also the print head isn't visible. Doesn't that mean a time-lapse mode moving the head away for each frame? How is that possible in vase mode?
Olá, Mais um.aero top das galáxias, Parabéns. Tem arquivo PLA ? Abraço
Você pode imprimir o arquivo em PLA ou LW-PLA
how much does it weigh?
Is it so hard for you to click on that link in the description? ... PRINTED WEIGHT LW-PLA 600g / PLA 1000g. TAKE OFF WEIGHT LW-PLA 1350g / PLA 1600g
uggghh tower pro servos are just not good in planes.... and dont use those heavy steel nuts plastic ones are better. and beautiful plane you have made :)
I love seeing planes built with those junk servos. Not only does it mean that just about any servo will work, but it also means that the aircraft is really well designed if it can still fly with those servos. I’ve had a couple give up on me, but it only takes one before you never trust them again.