log arch log hauler build 4 trailer axle spindle weld in kit

In this video we weld in the trailer axle spindle kit on the log arch.
#loghauler #logarch #traileraxlespindlekit
SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub amzn.to/3twHMcv
Hobart 500559 Handler 140 MIG Welder 115V amzn.to/2yrVLYO
Kevin Robinson's Amazon store front amzn.to/3Q7fGBL
As an Amazon Associate, I earn a small commission from qualifying purchases.
This will not, however, change the price of any product you purchase.
This helps support the channel and allows me to continue to make videos.
Thank you for the support!
If you would like to donate to help the channel
This is my PayPal link the donation will go straight to me.
paypal.me/kevinrobinson6688
ALL YOUR DONATIONS ARE APPRECIATED!
You can also click the SUPER THANKS button below the video.
And you can donate also thank you so much.
If would like to Sponsor a video Email [e-mail]
Mailing address
kevinrobinson6688 P.O.Box 123 Bobtown, PA 15315-0123
THANK YOU SO MUCH FOR ALL YOUR HELP AND SUPPORT LOVE YOU ALL!

[@TheWoodHaven]

I like it. Can't wait to see a log under that arch.

[@Robinson-Homestead]

Me to I hope it works.

[@gerardbauer4035]

I always enjoy watching you work. Your so creative and meticulous. Looking forward to seeing the log arch in action :) Thanks for sharing Kevin. Stay safe.

[@Robinson-Homestead]

Thanks Gerard, i can't wait to start using it , thanks for watching.

[@williammcguire3rd]

Looking good Kevin. Gonna turn out great.

[@Robinson-Homestead]

Thank you William

[@garykoch3923]

Good job . I am going to build a big bale hauler and unroller to pull behind an atv whenever my tractor gets sick and can't . Gleaning ideas and techniques from you and others .Thank you.

[@Robinson-Homestead]

Thanks for the comment glad to help

[@Hatch61]

Thanks for inviting us over Kevin, alway fun hanging out in the shop. Looking good my friend, be well.

[@Robinson-Homestead]

Thank you Hatch for always being there and watching, God Bless

[@garysmith4311]

Looking good my Friend!

[@Robinson-Homestead]

Thanks Gary

[@larrystone5749]

Good video enjoyed it its looking good Be safe God Bless

[@Robinson-Homestead]

Larry, thanks for watching.

[@larrystone5749]

I enjoy watching

[@Ivanskrakow]

exactly what i want to build ,, probably use square tubing though

[@MegaDenning]

Hi Kevin,
Thank you for showing how to weld a spindle for a trailer axle. I am looking at
building my own camper trailer with an off road suspension but i have never welded before.
I live in Australia and have noticed via youtube the different styles of suspension there are around.
I wondering if you would be able to shed some thoughts on how one would go about fabricating an
independent suspension for a camper trailer.
Kind Regards
Max Pozzetto
Victoria, Australia

[@Robinson-Homestead]

Thank you for watching, i'm not sure i would have to do some research.

[@samus4799]

Building a custom motorcycle trailer. Basically an aluminum Christian cross shape. The top part is the rear, it'll be box aluminum big enough to fit a hitch mounted hammock stand. These type of spindles will be fitted to either end of the horizontal cross piece, and the tongue will be at the bottom. I'll have a square wooden platform for tieing down camping supplies where the cross intersects. Should be super lightweight when it's finished, hoping for under 40lbs depending on which wheels I get.

[@Robinson-Homestead]

Cool build thanks for sharing.

[@IFHSP2]

If you needed shims, why even take the time to grind the seam out. Also, I’d there not a pipe and spindle that would work without shimming? Looking to build an axle myself.

[@kennkid9912]

Tubing. I have lots of Black iron tubing with 90s , couplings, Ts etc around. Can you just screw most of it together? And only weld where necessary? You have nice clean tubing cuts and welds by the way. Nice job. I am trying to use up stuff we have around. A welder says my pipe has a coating you have to burn off.Your thoughts?

[@Robinson-Homestead]

I think you can grind off the coating and also i yhink you really should weld all the pieces so you have the strength.

[@Mr402TA]

Welding metals of drastically different thicknesses always seems like witchcraft to know where to set the welder. Do you remember roughly how hard you were pushing your welder when you welded those spindles in?

[@Robinson-Homestead]

Just welding on issues

[@tundragyr]

Why not just weld the spindle to the down stem and put gussets direct onto the spindle?

[@Robinson-Homestead]

That would work also

[@alexgriffin6785]

You need yourself a file sander it will change your life

[@Robinson-Homestead]

Never heard of a foul sander I'll have to look them up

[@alexgriffin6785]

@@Robinson-Homestead they are great little grinders i have one from wen its a 1/2x18 belt removes material pretty quick

[@alimani2243]

4minute on sanding

[@Robinson-Homestead]

Thanks for watching.