KTM 300 Bottom End Rebuild
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Here it is! A complete rebuild of the KTM bottom end!
Let me know what you think in the comments and if you think we have earned it, please give us a like, and subscribe!
If you want to support us on Patreon, here is the link: / highlandcycles
Here is the link to the flywheel puller: amzn.to/390AIcQ
And here is the top end video: • TE 300 Top end
Now go ride your DIRTBIKES!!!!
#gospeloftwowheels #dirtbikes #KTM - ยานยนต์และพาหนะ
![[TH] 2024 PMSL SEA W1D5 | Fall | เก็บแต้มของจริง คือวันนี้](http://i.ytimg.com/vi/EciIAlCXg5k/mqdefault.jpg)
You my friend are a legend
Rebuilding my 01 300 exc
Buttom end bearing blew out and this is the best video I've found, looks pretty much the same besides the stator side and outer covers 😂
❤️
Doing my 02 300 exc now too. I did a full rebuild 10 years ago so it's about time I did it again 😅
I love how you actually brought up the fact of not whacking the crank because you can distort it by moving the crank webs it's a big problem that people don't understand they can shift if u hit it just right very good video man!!!
You’re my type of friendly mechanic ❤
Rebuilt my kids bike using your video ! Thanks !
That is awesome
Most informative video. I have been following this video step by step, you certainly know your stuff! Thanks heaps for the video 😁
Glad to help
Thank you for making this! I bought a 2009 ktm 250xcw and it’s my very first ktm after riding CR’s my whole life. The ktm service manual is very vague.
Great to hear!
Awesome video!
kickass video - doin mine tomorrow & wanted to see what I was up against. with this video - i got this
Heck yeah! You’ll kill it
Nice video !
Thanks
Great video! I was wondering why don't you heat up te inner race of the crankshaft cylindrical bearing, and then just drop it over the crankshaft? That's what I always do and then there's no need to use the press on the crank or the case. Also both engine halfs just fall into eachother without a press. Thats is actually how KTM says it should go!
I haven’t had good luck with that. I know there is a special tool to heat up and then hold that race so it heats up and you drop it on but I don’t have one. Since I don’t have that, I don’t have a way to hold it that I like. I worry that channel locks will damage it. I should probably just buy the tool.
@@highlandcycles ahh okay, I just heat it up in an over to about 150-175°C as per the manual, then it just slips on! Maybe give that a try with some old cranks
I like it.
Thanks
nice video thanks. just wondering why you dont put the top end on when its on the bench
Great question. The main reason is that it’s much easier to tighten the base nuts and head bolts while the motor is in the frame
My buddies 2022 300 xcw engine case is cracked/split where the swingarm axle slides through on the sprocket side. i know the top end need to be removes but my question is: can that case be replace without taking the clutch basket side all apart? thanks for doing what you do, you make great videos. I learned how to rebuild my fork and top end from watching you.
Unfortunately man, it all has to come apart
@@highlandcycles thank you for fast reply, if we are ever out your way I'm going to contact you to do some riding. keep up the good work n video coming.
The needles pop in .
Hey great video! What years is the bike
2008
hey man im having trouble with my bottom end rebuild, when i go to snug the centre case bolts i cannot turn my counter or main shaft by hand, any thing i should go over in particular i just put all new fresh bearings in the cases
Dang. You need to make sure all of the washers are in the right place and seated. (Aka not hung up on a groove or something. Also make sure all the bearings are fully seated
If I had bought a whole kit with new bearings and paid this guy to install it and he doesn't install my new bearings because he felt like the old ones were ok, I would be pissed.
I discussed with the customer, charged him less money and gave him the bearings.
Thinking about buying a 2015 250sx for $3000 sounds too cheap to me. Anyone got any advice?
Sounds pretty low but the good thing is that since it’s a 2stroke it would be pretty cheap to rebuild if something is wrong
@@highlandcycles Thank you. The video was very helpful, no bs just straight forward
how long did it take you to finish the bottom end ?
I can usually rebuild a 2t bottom end in about 2 hrs. That is just splitting the cases, cleaning and installing the crank. That doesn't include building the rest of the motor
Where can i buy a new cylinder for my 300? I can't find enything on the internet!
And in the wrench rabbit kit is no cylinder included
Daniel Leitner yeah that sucks. I don’t know if you’ve tried everything but it sounds like you have. I would see if your local dealer can “dealer locate” one for you.
@@highlandcycles thx mate! I try this out👌
Motors are electric, ENGINS are gas powered. Just saying.
Can this be done without a press?
Yes. You have to put the bearings in the freezer and heat the cases to get them to drop in.
Is it possible to convert a 2018 KTMxc to a SX transmission? Thank you
Yep.