Hello, I am in a dilemma, how can I connect to a GE Fanuc series 90-30? What software do I use? What operating system can I use? There is still equipment, but very little information...regards.
I have 1 question, I'm pretty knowledgeable with these.. but I have a problem when I turn my GE PLC off.. The info I put into the computer when running doesn't save when it shuts off. When I turn it back on it gives me like 360% reading everywhere..so I would have to go back in and put in my setting again.. But the software itself is still there..it's not the PC it works just fine.. Is this like losing software?? Have you had this happen before. Thanks!!
HELLO MY NAME IS IDEANGELES IN MY FACTORY HAS A GE FANUC SERIE 90 -30 PLC AND THE MACHINE FAILED AND WE HAD NO BACKUP, WE INSTALLED WINDOWS 7 ON A 32-BIT MACHINE, BUT WE ARE NOT ABLE TO COMMUNICATE, THE COMMUNICATION IS ETHERNET, COULD YOU HELP ME.
HELLO, SORRY I UPLOADED A PROGRAM FROM A FANUC 90-30 PLC, AND DOWNLOADED IT TO ANOTHER SAME PLC, WITH THE PROFICY MACHINE EDITION PROGRAM BUT I GOT AN ERROR WHICH SAYS "NO USER PROGRAM PRESENT" WHAT WOULD BE THE TROUBLESHOOTING FOR THIS ERROR. IT IS ALSO CONNECTED TO AN OPERATOR INTERFACE TERMINAL (MAP460D-240B). THESE ARE THE DATA OF THE COMPONENTS USED: CPU: IC693CPU323 PWR: IC693PWR321 SLOT1: IC693MDL240 SLOT2: IC693MDL240 SLOT3: IC693MDL390 SLOT4: IC693MDL940 SLOT5: IC693MDL240 SLOT6: IC693MDL940 THANK YOU VERY MUCH.
What do u mean by "replace the power supply"?.....the versamax micro PLC that I have is not turning on....the power led is off.......a lill help here please....!
Hello, I am in a dilemma, how can I connect to a GE Fanuc series 90-30? What software do I use? What operating system can I use? There is still equipment, but very little information...regards.
The wiring diagram need for the programming cable is not available in Egypt
RUN ışığı yanmayınca plc çalışmaz mı elimdeki plc RUN ışığı yanmıyor
I have 1 question, I'm pretty knowledgeable with these.. but I have a problem when I turn my GE PLC off.. The info I put into the computer when running doesn't save when it shuts off. When I turn it back on it gives me like 360% reading everywhere..so I would have to go back in and put in my setting again.. But the software itself is still there..it's not the PC it works just fine.. Is this like losing software?? Have you had this happen before. Thanks!!
had power drop out on a C80 - 35 ... anyone know how to turn it back to Run?
How do I do a change over between 2 CPU?
Where do i find the fault tablet?
Can I put a non rechargeable battery lithium battery cr2 3v?
HELLO MY NAME IS IDEANGELES IN MY FACTORY HAS A GE FANUC SERIE 90 -30 PLC AND THE MACHINE FAILED AND WE HAD NO BACKUP, WE INSTALLED WINDOWS 7 ON A 32-BIT MACHINE, BUT WE ARE NOT ABLE TO COMMUNICATE, THE COMMUNICATION IS ETHERNET, COULD YOU HELP ME.
Flesh memory fault kaise aata h
HELLO, SORRY I UPLOADED A PROGRAM FROM A FANUC 90-30 PLC, AND DOWNLOADED IT TO ANOTHER SAME PLC, WITH THE PROFICY MACHINE EDITION PROGRAM BUT I GOT AN ERROR WHICH SAYS "NO USER PROGRAM PRESENT" WHAT WOULD BE THE TROUBLESHOOTING FOR THIS ERROR. IT IS ALSO CONNECTED TO AN OPERATOR INTERFACE TERMINAL (MAP460D-240B).
THESE ARE THE DATA OF THE COMPONENTS USED:
CPU: IC693CPU323
PWR: IC693PWR321
SLOT1: IC693MDL240
SLOT2: IC693MDL240
SLOT3: IC693MDL390
SLOT4: IC693MDL940
SLOT5: IC693MDL240
SLOT6: IC693MDL940
THANK YOU VERY MUCH.
What do u mean by "replace the power supply"?.....the versamax micro PLC that I have is not turning on....the power led is off.......a lill help here please....!
Мне нужен перевод на руском
Elsen, Harasi maraqlidi, de tercume edim.