Should have checked and adjusted your valve lash whilst you had the value/rocker cover off. Generally you'll know it's overdue because the engine starts to make a loud 'ticking' sound which wasn't present when the 4B11 engine was new and in-spec. Also, use a torque wrench next time and follow the service manual bolt tightening routine (there is a certain sequence you have to torque the value/rocker cover, much like the star pattern on wheel lug nuts).
depends on what spareparts you are looking for. I normally don't go to SC cause the price is much higher. What I will do is search around Shopee and Lazada first. Then go to any areas with high concentration of workshops cause there is bound to be a spare part shop nearby. For specialize shops like AC parts supplier, I would ask any normal spare part shops if they know any nearby that they can recommend.
just a suggestion,better use silicone type gasket since we dont want to perform same process in short time...but now not sure how genuine the silicone one hahaa
i wasn't able to find the silicone type gasket or most likely i wasn't searching for it cause I did not know it existed. My original gasket lasted me since Jan 2011..... so that is a solid 8 years. Which was the reason why i went for original gasket.
@@mohdkamal3235 If its just a drain at the bottom without removing the pan and the filters, its most likely gonna be just 4 liters. Basic rule, fill it up to the correct level at the dipstick, go drive around, check and fill more if needed until the dipstick reaches the maximum level. In my case, i put in 4 liters, drove around and added 1 more liter after.
@@mohdkamal3235 You might wanna check the dipstick and see if there is enough oil. As long as it is enough, doesn't matter they use 4 liters or 5 liters.
bau hangit banyak punca. kena la check. Kalau gasket ni leak, akan nampak minyak keluar kat tepi engine. Tapi kalau bau hanyit cuma selepas merembat, then kemungkinan besar gasket block atau tempat lain yang leak.
As far as I know the engine, gearbox and chassis is sourced directly from Mitsubishi. The rest of the car, depending on batch, could be either Mitsubishi or Proton.
I just replaced my valve cover gasket and cleaned my engine, but I noticed my car still leaks.. found it was from the metal head gasket 😂 can does anyone know how to replace that?
metal head gasket isn't that easy to DIY. cause you will need to remove everything inside the cylinder head which includes the tappets and valves..... its like a top overhaul.
Inspira ni nak upgrade jadi lancer pon xde masalah.. Mmg tu asalnya.. Dari waja tukar jadi evo lagi dasyat.. Hahaha.. Skrg inspira dah murah boleh beli..
Sedih lah bang, tu orang panggil jv, kerjasama antara company. Kalau proton tiru, kenapa mitsu tak saman je proton. Harga mahal bising, harga murah pun bising.
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
Nice.. baru je tukar follow tutorial ni👍🏻👍🏻
Jimat duit upah. Jom DIY.
@@TCsAnythingGoes yup.. inspira kinda senang nk diy
Should have checked and adjusted your valve lash whilst you had the value/rocker cover off. Generally you'll know it's overdue because the engine starts to make a loud 'ticking' sound which wasn't present when the 4B11 engine was new and in-spec. Also, use a torque wrench next time and follow the service manual bolt tightening routine (there is a certain sequence you have to torque the value/rocker cover, much like the star pattern on wheel lug nuts).
Do you know how much the torque spec?
I hear this code throw a p0420 code so here I am. This was very informational man. Thank you for the knowledge.
Always happy to hear all the effort put into making these videos manage to help even if its a single person. Thank you for your comments.
Cantekk sgt bro.. Wow..
Terima kasih. Dah gembira kalau boleh membantu orang ngan video tutorial ni. Lagi gembira kerana ada jugak bro yang puji.
Nmpak bersih mcm baru. Fulamak.
How u clean em bro?
What's the part number for the 4b11 valve cover gasket set??
Mitsubishi Motors, Japan, "GASKET, ROCK 1035A583"
Does all evo x spark plug covers fit the inspira?
For the 2012 model there are only 16 bolts to be removed before the cover can be opened.
just wondering, need to drain the engine oil first or not?
Nope, cause you are opening the very top of the engine.
Tq for the instruction💪
No problem, just thought of documenting what I did so others can learn from it and maybe improve from my method.
Tq inspirapura2🤣🤣🤣
Hi bro nak tanya..Gam gasket tu memang hanya guna sikit je ke?
yeap, mmg pakai sikit je. tak perlu bubuh sekeliling
Kenapa gam gasket cuma letak dua point saja..apa tujuan
Pvc valve changed or not?
Do you have any ref where to buy a spareparts other than SC?
depends on what spareparts you are looking for. I normally don't go to SC cause the price is much higher. What I will do is search around Shopee and Lazada first. Then go to any areas with high concentration of workshops cause there is bound to be a spare part shop nearby. For specialize shops like AC parts supplier, I would ask any normal spare part shops if they know any nearby that they can recommend.
Just two points requiere gasket maker? Not all?
Yes, just those two points. And till now, no oil has leaked.
@@TCsAnythingGoes thanks Man, i Will try it
just a suggestion,better use silicone type gasket since we dont want to perform same process in short time...but now not sure how genuine the silicone one hahaa
i wasn't able to find the silicone type gasket or most likely i wasn't searching for it cause I did not know it existed. My original gasket lasted me since Jan 2011..... so that is a solid 8 years. Which was the reason why i went for original gasket.
@@TCsAnythingGoes oh, if thats the case then its worth it haha
since 2011..you bought ur car new kah bos?
yeah, i bought the car new. Order the first batch so the car is made in 2010 and registered 2011.
tq broo dri brunei SUB!!
Thank you for your support.
Bro.. Oil gear inspira 2.0P berapa liter ya? 5liter ke?
CVT fluid, i refill with 5 liters and it hits the correct maximum level on the dip stick
@@TCsAnythingGoes SC said only 4 litre for gear oil?..
@@mohdkamal3235 If its just a drain at the bottom without removing the pan and the filters, its most likely gonna be just 4 liters. Basic rule, fill it up to the correct level at the dipstick, go drive around, check and fill more if needed until the dipstick reaches the maximum level. In my case, i put in 4 liters, drove around and added 1 more liter after.
@@TCsAnythingGoes SC change the filters gear box N use only 4 litre gear oil..
@@mohdkamal3235 You might wanna check the dipstick and see if there is enough oil. As long as it is enough, doesn't matter they use 4 liters or 5 liters.
kalo gasket leaked punca bau hangit pembakaran ..sbb kereta sy ad bau hangit..masa merembat...kalo bwk biasa xde bau
bau hangit banyak punca. kena la check. Kalau gasket ni leak, akan nampak minyak keluar kat tepi engine. Tapi kalau bau hanyit cuma selepas merembat, then kemungkinan besar gasket block atau tempat lain yang leak.
Enjin sama tp ada part local proton sbb tu jnma brbeza
As far as I know the engine, gearbox and chassis is sourced directly from Mitsubishi. The rest of the car, depending on batch, could be either Mitsubishi or Proton.
I just replaced my valve cover gasket and cleaned my engine, but I noticed my car still leaks.. found it was from the metal head gasket 😂 can does anyone know how to replace that?
metal head gasket isn't that easy to DIY. cause you will need to remove everything inside the cylinder head which includes the tappets and valves..... its like a top overhaul.
Inspirate lancer@inspurapuralancer capayam mdm+local parts👎👎👎
Lancer ori only born in japan👍👍👍
engine datang dari mitsubishi bang, mitsubishi sendiri yang pasang and hantar seketul kat proton.
Inspira ni nak upgrade jadi lancer pon xde masalah.. Mmg tu asalnya.. Dari waja tukar jadi evo lagi dasyat.. Hahaha.. Skrg inspira dah murah boleh beli..
kesian ko bang... main tembak je.. x tau jgn komen..hahah.. benda ori dari mitsubishi sampai proton terus pasang.
Sedih lah bang, tu orang panggil jv, kerjasama antara company. Kalau proton tiru, kenapa mitsu tak saman je proton. Harga mahal bising, harga murah pun bising.