thanks, I used your video to install a LED light on my wife's 2014 Ski-Doo GSX. Basically only the air box connection was different due to the 900 ACE four stroke. great job
Wow , Thanks Great Video. The LED came with some photos that are so poor it's hard to Correlate what part of the sled correlates to the parts. Looks like I broke my LED before I even started the Install. I was looking through the parts it came with . I decided to pull the fuse out so I could know what size spare fuse to keep on hand. It's 5 amps. It appears it was soldered in place as the fuse broke apart when I tried to pull it out with small needle nose Pliers. I have not figure out how I am going to repair it yet. You did not say what color wire plugs to what terminal on the Switch .. I see that the BPR Instr4uctions do at least tell me that. I need reading glasses so I highlighted terminal 1 & 3 to make them easier to read. I did not know about the Cigarette Lighter Option. I just installed one on my Handle bars with a USB switch .. and I also installed a heavy wire for plug in Jump starting which also has an SAE two prong plug for the battery tender too.
would you happen to have a video on installing a skid plate on a Rev chassis? The LED light video was very helpful to me thanks for putting it out for all of us .
Will this work on a 2018 Expedition Sport 600 ACE which has the Rev-XS frame and if so, would the procedures be the same? Great video.....almost makes it look bone-head easy, which is what I need....thank you
The procedure will be the same or similar to any sled which accepts this specific light. However some of the dissambly and assembly tasks will be slightly different due to electrical wiring and engine type. We were extremely pleased with this light from a performance, install and looks perspective and would recommend it to anyone who rides at night.
I have a 2020 Skidoo renegade enduro 900ace turbo I see I need to install it with wide led lights. I'm also going with the Led headlights and I'd like to put one of these on. I guess my question is, is this video something I can use?
I have 2010 ski doo 1200 renegade adrenaline and I have to change the left handle bar switch with all the wiring is it as simple as the one you did the led lights or is the hood different to take off cause mine doesn't seem to co-operate
Josh Johnson not at this stage. We don't have a G4 in our fleet this year as we went to a turbo Cat. We're looking to flip one our current sleds to a new sled. But are undecided on which direction to go. I'll keep you posted. Steve
How long do these Auxiliary LED lights last? I don't know much about lighting so when these go bad do you need to buy a whole new strip? which is $360USD from Ski-Doo or do you replace a bulb in it? Thanks!
That might be a tall order to fill. As we've only ever seen the complete LED Kit.. I suggest a call to the dealer, who in turn will call Ski-Doo but I suspect you might get stuck buying the whole kit.
Save yourself some money and hassle and just upgrade your headlight bulbs to LED They are plug and play and shines better light then these. 30$ on amazon....
thanks, I used your video to install a LED light on my wife's 2014 Ski-Doo GSX. Basically only the air box connection was different due to the 900 ACE four stroke. great job
Fantastic video on installing the auxiliary LED light. Made it very easy and fast for me. The "destructions" that came with it was terrible at best.
Excellent video on the auxiliary LED light installation... very well made...
Excellent video! Followed this to install it on my 2016 Renegade Adrenaline 800 ETEC and it worked perfectly!
Excellent video! Made install very easy.
Great video but to really finish it off you should’ve did a night shot with the light on and off that would’ve helped a lot of people
Wow , Thanks Great Video. The LED came with some photos that are so poor it's hard to Correlate what part of the sled correlates to the parts.
Looks like I broke my LED before I even started the Install. I was looking through the parts it came with . I decided to pull the fuse out so I could know what size spare fuse to keep on hand. It's 5 amps. It appears it was soldered in place as the fuse broke apart when I tried to pull it out with small needle nose Pliers. I have not figure out how I am going to repair it yet.
You did not say what color wire plugs to what terminal on the Switch .. I see that the BPR Instr4uctions do at least tell me that. I need reading glasses so I highlighted terminal 1 & 3 to make them easier to read.
I did not know about the Cigarette Lighter Option. I just installed one on my Handle bars with a USB switch .. and I also installed a heavy wire for plug in Jump starting which also has an SAE two prong plug for the battery tender too.
The old style of just lifting the hood up was a lot faster
would you happen to have a video on installing a skid plate on a Rev chassis? The LED light video was very helpful to me thanks for putting it out for all of us .
We're installing a skid plate on a XS Chassis next week. That may or may not help you out.
Steve
Great detailed video ... but I realized that’s way more work than I wanna do !!!!
Great video!
Thanks. I installed one on my lynx 5900 glx 1987
Will this work on a 2018 Expedition Sport 600 ACE which has the Rev-XS frame and if so, would the procedures be the same? Great video.....almost makes it look bone-head easy, which is what I need....thank you
The procedure will be the same or similar to any sled which accepts this specific light. However some of the dissambly and assembly tasks will be slightly different due to electrical wiring and engine type. We were extremely pleased with this light from a performance, install and looks perspective and would recommend it to anyone who rides at night.
I have a 2020 Skidoo renegade enduro 900ace turbo I see I need to install it with wide led lights. I'm also going with the Led headlights and I'd like to put one of these on. I guess my question is, is this video something I can use?
I have 2010 ski doo 1200 renegade adrenaline and I have to change the left handle bar switch with all the wiring is it as simple as the one you did the led lights or is the hood different to take off cause mine doesn't seem to co-operate
my track ended up falling off... did i mess up somewhere a long the line?
@SandMan 716 u forgot to fill up your engine up with blinker fluid
Can you video how to installation chainsaw holder and gun holder bracket on 2022 skidoo’s 600r etec skaldic wt?
Looking to install this LED light on my Gen 4 chassis, will you be doing an instructional video for this model sometime?
Josh Johnson not at this stage. We don't have a G4 in our fleet this year as we went to a turbo Cat. We're looking to flip one our current sleds to a new sled. But are undecided on which direction to go. I'll keep you posted.
Steve
Hi I have a 2017 ski doo etec 600 renegade.. Will this work and where can I buy it what is the part model? Thanks
Its a shame that a Doo doesnt come with a good LED light from the factory...
Totally agreed.
Yup agreed
Can anyone tell me what size fuse goes in the inline fuse? I have no power to my light and I assume it is because the fuse is missing.
I’ve installed this on my 2015 Summit but the ON-HI does not work. Only the ON works. Why?
Do you have a video for the new the gen 4 chassis
Sorry. Not at this stage. Possibly this year. I'll keep you posted.
RFTV
Okay thank you
How long do these Auxiliary LED lights last? I don't know much about lighting so when these go bad do you need to buy a whole new strip? which is $360USD from Ski-Doo or do you replace a bulb in it? Thanks!
Very helpful 👍how about a vid for the same install on a gen 4
Top Drawer
Does anybody recommend led bulb swap or this accessory light?
500 for a light bar. Good old ski foo accessories
Anyone know where I can get the harness??
That might be a tall order to fill. As we've only ever seen the complete LED Kit.. I suggest a call to the dealer, who in turn will call Ski-Doo but I suspect you might get stuck buying the whole kit.
Don’t need that music but good video
The work involved doesn’t seem worth it. Wouldn’t it be easier to just change your halogens out to led or hid?
Well that was easy. 😂😂😂
Save yourself some money and hassle and just upgrade your headlight bulbs to LED
They are plug and play and shines better light then these.
30$ on amazon....
Can anyone explain how this light is worth over $400?, its the biggest ripp off in the snowmobile industry