When I read the title I immediately knew what the issue was going to be, I've fixed a few of these. Only Chrysler would be stupid enough to put an unsealed relay box in a wheel well. P.S., you can simply replace the corroded contacts in the fuse box, an uninsulated crimp on female spade terminal clips right into the relay box and works great. I think .187" is the terminal width that is used for the 3 smaller relay terminals, the same size that car audio speakers use.
My 2008 jeep Patriot did that just now and same relay as your and everything else happen as your we going to put a new relay in in after I clean it and everything else
Put a new crank sensor on 2016 Patriot. Fixed the no start. Now all the idiot lights are on. I followed every suggestion on TH-cam including the Cobra Kai hoedown barn dance, nothing. Any ideas?
I'm having the same issue after attempting to clean out corroded terminal but I don't have any missing wires even when removing harness. Are some of the wires spliced together?
oh and a fire truck vid, yep comments off on the next vid but still watching. about time you made a giant chuchasaurs from steel and eith make it a wood burner or shove a propane rig in it
You bought a whole new relay box and spliced all the wires? That was the simplest for you? The one corroded plug was for a radiator fan, and the 2 wires that went there just needed connected for it to start. No, instead you snotted some hot glue on to a piece of shit as if it would protect it from going to shit...
The no audio killed me. Nothing can go right. Not this Jeep. Not even the video that’s supposed to show me how to fix it. Fuck me.
Great, just as you were telling us what the problem is the sound dies!
No doubt. Thanks for nothing!
Thought it was just me I'm annoyed already just to be more annoyed getting to the end of this video and not hearing what he says
When I read the title I immediately knew what the issue was going to be, I've fixed a few of these. Only Chrysler would be stupid enough to put an unsealed relay box in a wheel well. P.S., you can simply replace the corroded contacts in the fuse box, an uninsulated crimp on female spade terminal clips right into the relay box and works great. I think .187" is the terminal width that is used for the 3 smaller relay terminals, the same size that car audio speakers use.
No audio after 4:15
Yeah.
@HackNpackShop. Lost the audio half way through the video. Wondered how you removed the relay box so I can check the bottom....
I miss the good old days when wiring harnesses were simple, well layed out and easy to diagnose and work on.
You missed to buy a good car.
Jeep is a crap.
We are glad you have plenty of work . You have to take care of business first but your u tube family misses the videos. God bless you and your family.
Great job on the not enough uploads!!!!
My is 2007 and blow a 10a fuse #33 and won't start any idea what is the problem?
he`s alive :D
hope yer having a goody goody
My 2008 jeep Patriot did that just now and same relay as your and everything else happen as your we going to put a new relay in in after I clean it and everything else
Nice to see you again ,on ur present vidoe.
Put a new crank sensor on 2016 Patriot. Fixed the no start. Now all the idiot lights are on. I followed every suggestion on TH-cam including the Cobra Kai hoedown barn dance, nothing. Any ideas?
Very informative thank you
I'm having the same issue after attempting to clean out corroded terminal but I don't have any missing wires even when removing harness. Are some of the wires spliced together?
Hey did you replace the whole relay box or can you do one where the corrosion is?
Sound went out right b4 you were about to say check relay
Lost the sound pisser, but yes like the other guy said. More videos!!!
Genius idea to put electrical components where they will be constantly splashed by salt water.
I think you meant '𝘶𝘯𝘴𝘦𝘢𝘭𝘦𝘥 electrical components'.
What happens when you hv a nose itch while holding a screwdriver.Going to check this neighbor's same problemo.
Audio took a shit at 4:15
Yes, he's back....
oh and a fire truck vid, yep comments off on the next vid but still watching.
about time you made a giant chuchasaurs from steel and eith make it a wood burner or shove a propane rig in it
Nice to see a video
4 minutes in, sound drops off. No Sound after that.
I'm buying a 08 compass today with this problem
thanks for the tip.
Yay! Found 2 bad relays on my 08 jeep.
Can I ask how you removed the relay box from the frame? Mine doesn’t seem to want to budge. Is it just stubborn?
Please re-record the end
No voluume towards end.
You bought a whole new relay box and spliced all the wires? That was the simplest for you? The one corroded plug was for a radiator fan, and the 2 wires that went there just needed connected for it to start. No, instead you snotted some hot glue on to a piece of shit as if it would protect it from going to shit...
Stay safe my dude👍 Somm-Bitch!
That's my baby.
Can’t hear what you saying at the end
Your sound went dead at the end.
Stupid place to have a junction box,All the water,salt just eats it up!
Dude, your audio carped it’s birches near the end of the video.
I'll end the commentary for this video.
"You all have a Goody Goody,............... How do I turn this off,.........Sumbitch...........OFF.
Hacknpack video productions.. No sound bud..
make more vids bud
Your need to invest in better sound equipment or camera? And produce more videos Bud!
I thought you had the wuhan flu .glad to see you are ok