Hi Billy, remember the old addage, 'you can lead a horse to water', but a 'pencil must be lead', lol, good tips on the grip-leads, I use them, and hopefully don't lose them! 🎣👀👍🍻.
Excellent brother Billy will try that way of bending the wires as I have always used rollers and bent above roller that could save me about 6000 plus rollers a year. Thank brother
Yeh, Stephen give it a go buddy. The sea will claim them anyway, it's just a matter of time. And at least you don't add plastic to the problem. Thanks Brother 👍😁
Nice one Billy 👍 I'll try that way, I always did them the usual way but some leads it's hard to bend the wire past the lead enough to get a good bite. 👍
Nice one Billy! I usually buy my Grip Leads complete for £1 each, but was keen to have a go at your Leads with 3mm Strimmer line. My Pillar drill & press is across the channel, so going to wait until I'm over there to drill the Leads. Tight lines - stay safe & well, Dave. 🎣🎣👍👍
Hi Trampster. 1£ a cast, sometimes. Just to rich for my blood. I think it's worth the effort, quick tip for drilling the holes. You can use a vice, the problem is the drill bit break. So heat them until the red hot, then let them cool slowly. This will work better, thanks Brother 👍😁
These damn sinkers are a trade all by themselves.
Thanks for the tips.
Anytime Red, thanks Brother 😁👌
Hi Billy, remember the old addage, 'you can lead a horse to water', but a 'pencil must be lead', lol, good tips on the grip-leads, I use them, and hopefully don't lose them! 🎣👀👍🍻.
Thanks Mark, hope it helps out. FISH on Brother 👍😁
Excellent brother Billy will try that way of bending the wires as I have always used rollers and bent above roller that could save me about 6000 plus rollers a year. Thank brother
Yeh, Stephen give it a go buddy. The sea will claim them anyway, it's just a matter of time. And at least you don't add plastic to the problem. Thanks Brother 👍😁
Good tip Billy thanks for sharing
Anytime Brian, thanks Brother 👍😁
Gripping stuff Billy. 🤗🎣
🤣👌 thanks Brother 👍😁
Damn that was my line 🤣👍
Great tips matey 👍👍🤠
Anytime Brother, thanks 👍😁👌
As always, interesting and informative.🧑🎓
Thank you.👍
Take care and stay safe.😷🙊
Thanks Ian, glad you liked it. Fish on Brother 👍😁
niceone billy and cheers
Thanks Brother, anytime 👍😁
Nice one Billy 👍
I'll try that way, I always did them the usual way but some leads it's hard to bend the wire past the lead enough to get a good bite. 👍
Ok Daz, give it a go. Thanks Brother 👍😁
Good morning Billy
Top tip my friend, can I ask where is bloody spring ?
Have a great weekend billy and be lucky
😎
It's in the air, Michael 😜 thanks Brother 👍😁
Nice one Billy! I usually buy my Grip Leads complete for £1 each, but was keen to have a go at your Leads with 3mm Strimmer line. My Pillar drill & press is across the channel, so going to wait until I'm over there to drill the Leads. Tight lines - stay safe & well, Dave. 🎣🎣👍👍
Hi Trampster. 1£ a cast, sometimes. Just to rich for my blood. I think it's worth the effort, quick tip for drilling the holes. You can use a vice, the problem is the drill bit break. So heat them until the red hot, then let them cool slowly. This will work better, thanks Brother 👍😁
Awesome Billy Brother, Na Man cant have one side, longer than the other, get A Grip Man, silly Billy Xx🙂😘
I made the video, so all you could get a grip. Save your sled's, it to late for me🤣 thanks Brother 👍😁
I made the video, so all of you could get a grip. Save your sled's, it to late for me🤣 thanks Brother 👍😁
@@Billyfishing_watch 🤣🤣😘😘
@@Billyfishing_watch 😘 love ya butty, stay safe no matter where you are ill see you on the beach 😂🤣
Deadly stuff Billy! Ill have too long on to Ali now 😂
Hi Ciaran. get some, you save a lot of money. Mo money, mo fishing🤣 Thanks Brother 👍😁
Thanx for posting. Bummer on that rod break. Where can I get those led molds?
I'll see if I can find one for you, thanks Randy 👍😁
@@Billyfishing_watch Thanx bud.
No probs 👍