I love how you methodically trace down the issues. I had the same at a donut shop and noticed, "hey, no tube and no PS", but as soon as I removed the Roll out switch the blower came on". Funny how these machines get a mind of their own! Keep making these TAD. I work alone and you a lot of you good AC guys on YT really are my "colleagues". Thanks again!
I didn't read through all the comments, and Im not doubting that it was a bad motherboard. Just curious if anyone else saw the substantial spiderweb in the right burner from the beginning!? I know that it doesn't take much to interfere with primary air interfering with a modern furnace firing up, especially when it's just one burner that isn't lighting. You have to look at everything very carefully every time. Not trying to hate at all, I love your videos, keep them coming. Like I said it was just an observation I made
This video came in clutch today. Had intermittent no heat & decided to investigate. Thanks to your video I knew where to start looking (I'm not an HVAC guy) & I found my problem. The nipple on the motor that connects the hose to the pressure switch was completely clogged with lime scale. Not sure how that happens but once I cleaned it out everything started working as it should. Thanks again for this video. It was an amazing resource.
I had an exact ameristar furnace the other day that was set up for propane do the same exact thing changed board gas valve and checked the inlet gas pressure it it was at 15 iwc and when furnace fired the propane would drop to 0 iwc got it narrowed down to a pressure regulator at the tank
Tadd is an awesome guy. Really would have loved to have heard back from you last year on the email. It's ok. You are a busy guy. I enjoy all your videos and the pride you always take in your work plus integrity
I think windy conditions make my mini splits run constantly. I'll have remote set at 65, but it will be 75 degrees in the house when it's windy out. I have a 4ft tall fence in front of units blocking wind a little , but still not performing as needed.
Just came from the same issue on a tempstar gas furnace. Only getting 2.1v out of the board on the inducer hot leg during call for heat, 120v going into the board. Inducer would come on intermittently if you reset the system, but never for more than a few seconds.
Yo Tad good vids bro , the very first thing I noticed was the board throwing 3 flashes pressure switch fault, if you always look at the fault codes on the board before doing anything might save ya some troubleshooting steps!
I was just quoted $1,000 to replace my Ameristar main board. Seems a little excessive when I can find the part for about $60 new and the labor to replace it seems pretty straight forward. Is there something I'm missing as to why they would charge that much? And that is their discounted pricing according to them.
99% of the time you don't need to replace a spade connector unless it's corroded. However you do HAVE to smash crimp them again and smash down the female spade deals so it has a better connection on the male spade terminal.
I just found a bad board on one of these pieces of junk last night. I didn't sell the communist chinese junk. Someone else did. The blower would not come on due to that larger relay energizing but not closing switch. Show me the money.
I love how you methodically trace down the issues. I had the same at a donut shop and noticed, "hey, no tube and no PS", but as soon as I removed the Roll out switch the blower came on". Funny how these machines get a mind of their own! Keep making these TAD. I work alone and you a lot of you good AC guys on YT really are my "colleagues". Thanks again!
I'm proud to be your colleague my friend keep on keeping on.
I didn't read through all the comments, and Im not doubting that it was a bad motherboard. Just curious if anyone else saw the substantial spiderweb in the right burner from the beginning!? I know that it doesn't take much to interfere with primary air interfering with a modern furnace firing up, especially when it's just one burner that isn't lighting. You have to look at everything very carefully every time. Not trying to hate at all, I love your videos, keep them coming. Like I said it was just an observation I made
These are my favorite type of videos you make. Ones where you do a full troubleshooting walkthrough.
Keep the videos coming big Tad! We running no heat calls like it’s nobody’s business in Georgia!
This video came in clutch today. Had intermittent no heat & decided to investigate. Thanks to your video I knew where to start looking (I'm not an HVAC guy) & I found my problem. The nipple on the motor that connects the hose to the pressure switch was completely clogged with lime scale. Not sure how that happens but once I cleaned it out everything started working as it should.
Thanks again for this video. It was an amazing resource.
Man I appreciate your videos! 4 real very helpful and informative! Pls keep em coming!!
You got it
Thanks for watching brother
I had an exact ameristar furnace the other day that was set up for propane do the same exact thing changed board gas valve and checked the inlet gas pressure it it was at 15 iwc and when furnace fired the propane would drop to 0 iwc got it narrowed down to a pressure regulator at the tank
Can’t wait to do HVAC professionally. A year left of school and I’ll be out of industrial maintenance and be into HVAC!
congrats my friend
Congratulations, pal
NOT GUNNA TAKE MY LAND AWAY sticker just added to the quality of this video. Great vid!
you saw that hahaha
Tadd is an awesome guy. Really would have loved to have heard back from you last year on the email. It's ok. You are a busy guy. I enjoy all your videos and the pride you always take in your work plus integrity
This video just hammers in the need for a pre-season inspection / PM. I’ve already done mine . Thanks Taddy.👍👍👍👍
Glad to help
GOOD VIDEO , VERY HELPFUL .
Glad you like the video I'm glad I could help you.
Thank you for watching
Man I wish I could ride with you. I’m trying learn everything still. Just trying to fill the gaps, thanks for these videos they are awesome!
I fix a lot of LP & Gas fire places, but they are boring compared to these furnace repairs! I love all of it! Thanks for the great tech tips Tad!
Thanks for watching!
great video!
Glad you enjoyed it
I would like to learn how you bypass the inducer motor from the board and I could do the same on other packet units thanks
Excellent work as always..I learn Soo much watching you work .thanks a ton mate...cheets
My pleasure!
I think windy conditions make my mini splits run constantly. I'll have remote set at 65, but it will be 75 degrees in the house when it's windy out. I have a 4ft tall fence in front of units blocking wind a little , but still not performing as needed.
way to stay cool while applying the heat.
It looks like that third burner tube was packed full of cobwebs and preventing gas from going through.
great video tech
thanks 👍
Yup good job. bypass let your troubleshooting faster
Very good video
Thanks for the visit
Good class amigo 👍🏾I appreciate it sir
You are very welcome
Hi seeing is believing the skill demonstrated
Note these are notoriously clogging up the inducer motor vacuum port. Drill it out a little bigger takes care of it
Just came from the same issue on a tempstar gas furnace. Only getting 2.1v out of the board on the inducer hot leg during call for heat, 120v going into the board. Inducer would come on intermittently if you reset the system, but never for more than a few seconds.
Thank you for sharing your experience this is great
Hi, great and informative video! BTW, do you have any residential electrical heat pump videos?
I do
I will do more though
I’ve replaced about 4 boards on 4 different units in some apartments exact model for some reason the fan relays keep blowing up on them
First time I seen a gas furnace with a set of contacts. But ofcourse I don't deal with brand around here.
Good job Teddy this’s no bueno
Eso no es bueno 😂😂😂
gracias mi hermano
Yo Tad good vids bro , the very first thing I noticed was the board throwing 3 flashes pressure switch fault, if you always look at the fault codes on the board before doing anything might save ya some troubleshooting steps!
Thank you brother
When you went down with the camera...nice cobwebs on rh inshot burner! ha.
Do u have a video on how to check high n low pressure switch on a bard unit
yes
🤘🏽🤘🏽🤘🏽🤘🏽👍🏽
Tad didn't you upload a video on York parts, specially for inducers and how you have to assemble them? I can't find it
I think this one is it
th-cam.com/video/kJ3URmKVAbA/w-d-xo.html
#1 problem vacuum port on inducer plugs up have to drill it out a little bigger
My weakness is diagnosing the control board. Do you have a video for that?
yes
Nice job imI wish, I could work for u and learn and become a good technician like u 💪🏼💪🏼
can the boards be repaired or is that against the rules. relays are the first thing to go and there cheep.
Boards can be repaired sometimes
It's always great to try
And it's great to learn new ways to do things
I was just quoted $1,000 to replace my Ameristar main board. Seems a little excessive when I can find the part for about $60 new and the labor to replace it seems pretty straight forward. Is there something I'm missing as to why they would charge that much? And that is their discounted pricing according to them.
Sounds like you're being overcharged
5:50 that unit has 3 bars of signal. 😄😄😄
Man unit doesn't have a ZW terminal? 😉👌😎👍
Gas furnace trouble shooting training
TADDY BEAR I speak Spanish I like it
99% of the time you don't need to replace a spade connector unless it's corroded. However you do HAVE to smash crimp them again and smash down the female spade deals so it has a better connection on the male spade terminal.
Nice job,amigo. I liked when you said No bueno 😅.
Thanks! 😃
Must be the electronic control board
All function is coming from the electronic board bro
Common doesn't always mean "Ground" or "Neutral" it's just a wire that's "common to the circuit", Could be anything really.
I want to be the first Spanish speaking employee in your company if u hire me…….😬
But can I make Bay Area wages?
Need more wiring experience and reading schematics
Don’t know nothing furnace outside?
Gas pack, very common equipment in Southern states.
I just found a bad board on one of these pieces of junk last night. I didn't sell the communist chinese junk. Someone else did. The blower would not come on due to that larger relay energizing but not closing switch. Show me the money.
What unit isn’t made in China? Or have Chinese parts?