Mastering Gas Heat in 10 Minutes

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ม.ค. 2025

ความคิดเห็น • 272

  • @Lovinflyindrones2022
    @Lovinflyindrones2022 ปีที่แล้ว +13

    Very nice of u helping the mate out in his time of need. You hardly hear of that anymore

  • @thereckchanic4709
    @thereckchanic4709 11 วันที่ผ่านมา +4

    HVAC student here. I wished all teachers of this trade would take their time for us to learn and understand. The tech schools just give you the bare minimum to pass and still you don’t have much understanding of it. Great video. I have learned a lot from you than my school.

    • @TaddyDigest
      @TaddyDigest  11 วันที่ผ่านมา

      Thanks for the kind words, I'm glad my videos are helping you learn!

  • @NathanielRodriquez-nq1cx
    @NathanielRodriquez-nq1cx ปีที่แล้ว +22

    The best hvac guy on TH-cam. The way you explain things is just so helpful. I appreciate tf outta you Ted !

  • @jmc6940
    @jmc6940 ปีที่แล้ว +6

    Your a stud my guy. Helping out somebody and figuring out how to get paid with a video. Then simultaneously training a youngster. 👍

  • @OneSaintPaul
    @OneSaintPaul ปีที่แล้ว +13

    This man is a legend! Thank you for allowing us take part in this lesson!

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว +1

      I'm here to help my brother
      Thank you so much for watching the videos. Please share the videos when you have time

    • @dporrasxtremeLS3
      @dporrasxtremeLS3 ปีที่แล้ว +1

      Your Giving will come back to YOU! I thoroughly enjoyed Every minute of this video! Thanks!@@TaddyDigest

  • @Jax-702
    @Jax-702 วันที่ผ่านมา +1

    Tad, thank you for taking the time on explaining HVAC videos thoroughly. You’re a great instructor for me!!! Kudos brother!!! Thank you and God bless you! 🙏🏼Javy from Las Vegas, NV.

  • @swanjaymusic
    @swanjaymusic ปีที่แล้ว +5

    NEW JERSEY HVAC since 1985.... Good vid... The spring swap was golden.... Scrap yard great idea...

  • @sarbbhamra6758
    @sarbbhamra6758 ปีที่แล้ว +5

    Thank you 🙏 for making great videos. God bless you!!!
    Toronto, Canada

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว +1

      You're welcome thank you so much for watching

    • @sarbbhamra6758
      @sarbbhamra6758 ปีที่แล้ว +1

      Hello, I love watching your videos. I went to hvac trade school. I got my G2 ticket. I didn’t learn much from the school, but I have learned from your videos. Would you be able to make a video on ac how to top up the low Freon.
      Thank you so much.
      Really appreciate your time and effort of making great videos.
      Toronto, Canada 🇨🇦 😊

  • @emiliofernandez-gs5sz
    @emiliofernandez-gs5sz หลายเดือนก่อน +6

    We need more people like you around here where I live. I love your videos. God bless you

    • @TaddyDigest
      @TaddyDigest  หลายเดือนก่อน

      Wow, thank you

  • @jrodriguez4855
    @jrodriguez4855 วันที่ผ่านมา +1

    Great video man. I went through HVAC schooling in late 90's and worked for someone but didn't apply myself. Now, 27 years later I am in the field and having to learn a lot. Your videos have helped me out tremendously. Keep up the good work and videos. Thanks

    • @TaddyDigest
      @TaddyDigest  วันที่ผ่านมา

      You're welcome, my brother.I'm so glad that you found the videos helpful

  • @davidwood4935
    @davidwood4935 9 ชั่วโมงที่ผ่านมา

    I'm from South Carolina and that's exactly why I'm watching this kind of stuff.I'm trying to help her ellie gentleman

  • @nigelhosein7822
    @nigelhosein7822 ปีที่แล้ว +15

    Hey taddy man u really know a lot about those units and good to see your passing the knowledge along keep up the good work

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว +3

      I'm glad you watched the video on my friend. I'm definitely gonna keep trying to teach those who never had what I needed when I was getting started.

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว +1

      More to come!

  • @johnnyjackpots505
    @johnnyjackpots505 ปีที่แล้ว +7

    Another good training, brother! Gracias!!!

  • @TonyRodriguez-ok2ix
    @TonyRodriguez-ok2ix 10 หลายเดือนก่อน +3

    Please make a video on how to clock the gas meter.

    • @TaddyDigest
      @TaddyDigest  10 หลายเดือนก่อน

      Okay deal

  • @ThePeetyfresh
    @ThePeetyfresh หลายเดือนก่อน +3

    I have been in Service for almost a year now and your videos sure do help me out bud. Thanks man

    • @TaddyDigest
      @TaddyDigest  หลายเดือนก่อน

      Glad to help

  • @Lovinflyindrones2022
    @Lovinflyindrones2022 ปีที่แล้ว +4

    Thats good therapy. Helping others out. Good for the soul. Ive never felt bad Helping others in need. Great work mate

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว

      I agree 100%. Thank you so much for watching

  • @davepeera1247
    @davepeera1247 ปีที่แล้ว +6

    Taddy you are the Man..! Not just educating others. Also helping a deserving customer in difficult time.
    Keep the good work going,,,👍

  • @terrychetvidz
    @terrychetvidz ปีที่แล้ว +2

    Your a good person. God bless brother

  • @pejmanmomen
    @pejmanmomen 11 หลายเดือนก่อน +2

    I have no question, I just want to say thank you , I’m new hvac student and I’m from Atlanta. I think I watch all ur videos , ur video helps a lot bc of ur videos it makes hvac school a breeze 🙏🏻🙏🏻🙏🏻🙏🏻, when I make money and get my license I will give back to the community, 🤝

    • @TaddyDigest
      @TaddyDigest  11 หลายเดือนก่อน +1

      You are so welcome

  • @joseortizjr504
    @joseortizjr504 หลายเดือนก่อน +3

    God bless you as well. I like that and I do the same all the time! I've been a auto car technician and always helping ppl out

  • @FabledNarrative
    @FabledNarrative 3 หลายเดือนก่อน +2

    I am currently in HVAC Certification 1 classes.
    This is legit.

    • @TaddyDigest
      @TaddyDigest  3 หลายเดือนก่อน

      Excellent. Thank you so much. I'm glad you enjoyed the video. Please share the video and support

  • @roo1163
    @roo1163 ปีที่แล้ว +2

    I like the patience and attention to details on components in order. Lotta guys jump around or right to the issues but not the cause. Wish I had access to tech tips like this when I started out. Keep em comin!

  • @jesusmeda7382
    @jesusmeda7382 ปีที่แล้ว +3

    You are a good men.helping someone that need help

  • @Wsldbrd1
    @Wsldbrd1 ปีที่แล้ว +2

    I thoroughly enjoyed your vast experience . I could pick your brain all day with follow up questions.

  • @bmeekma123
    @bmeekma123 ปีที่แล้ว +8

    Hey man! Just want to say I’m on my 4th week as an hvac tech. This video has helped a ton and is such good info. Thank you for doing these videos! I’m learning a lot! Keep it up!

  • @eddiebullard3468
    @eddiebullard3468 12 วันที่ผ่านมา +1

    Thanks Taddy man you are the most committed and complete technician I have ever seen
    Eddie Bullard
    New Carrollton, Md

    • @TaddyDigest
      @TaddyDigest  11 วันที่ผ่านมา

      Thank you for the kind words, Eddie!

  • @philipsakhong1918
    @philipsakhong1918 ปีที่แล้ว +2

    Thank you for sharing the informative video ! A lot to learn from this video

  • @sawdust85222
    @sawdust85222 ปีที่แล้ว +3

    Awesome job! Helping those in need.

  • @jenniferm5375
    @jenniferm5375 ปีที่แล้ว +2

    Helping others in need says a lot about you , you're a good tech and a nice person. God will pay you back 10 fold greetings from California

  • @Tonyhvac
    @Tonyhvac ปีที่แล้ว +3

    The Best sequence of operation class on a furnace,good job amigo I appreciate u,happy Holidays 😀

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว +1

      Thank you my brother
      I really appreciate your kind words and I appreciate you watching the video.

  • @jaykeller1
    @jaykeller1 ปีที่แล้ว +2

    Taddy! excellent video sir! Thank you for your knowledge!

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว

      you're welcome. I am so glad you liked the video
      thank you for watching 👀 😀
      please share the video if you want

  • @gregorymorris8343
    @gregorymorris8343 23 วันที่ผ่านมา +1

    This is what the world’s about helping others ❤❤God bless you. Just started watching you.r videos . Learned so much And I will subscribe.

  • @jimjenkins003
    @jimjenkins003 หลายเดือนก่อน

    I have this same unit except mine is a 6 burner and this is by far the best information on TH-cam. I knew most of this information except for the limit switch and how to adjust a gas valve. I hope you do a video on exactly what to look for on checking a heat exchanger. I just had an elderly neighbor where the burners were not lighting up even though the inducer motor was coming on. I checked the pressure switch by using an ohm meter while putting suction on the tube (unplugged of course) and it was good. I kept sticking a drill bit back in the inducer motor's port to make sure it wasn't blocked but it still wasn't pulling suction. I finally took the inducer motor off and there was a large mud dauber nest that was apparently falling back down every time I took the drill bit out. I would never charge my neighbors for anything I can do to help. So these type videos really do help people out more than you know. Just subscribed.

  • @jpeth7080
    @jpeth7080 หลายเดือนก่อน +1

    I love the way you show in depth the trouble shooting and helping anyone out is differently rewarding when i did service work it was a great feeling helping people in need getting someone back in heat in the middle of a cold Wisconsin night is almost like a high!! if you haven't done it try it! Thanks for your videos

  • @Bennie716
    @Bennie716 ปีที่แล้ว +2

    Great video.. Especially what you said at end Taddy 👍🇺🇲🇺🇲

  • @meangreen2792
    @meangreen2792 ปีที่แล้ว +3

    HELL YEAH!🔥 Furnace Repair Videos! 🔥 Keep’em Coming. 🤙

  • @smartcard7
    @smartcard7 ปีที่แล้ว +2

    Thank you, this was very helpful

  • @cefgil3905
    @cefgil3905 ปีที่แล้ว +1

    Great video! I’ve been working as a commercial tech for over a year now and mostly self taught. Your videos and a couple of other channels I watch have really helped me. Bravo!

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว

      Awesome news so glad to hear
      Thank you so much for watching

  • @s.w9935
    @s.w9935 ปีที่แล้ว +26

    You are supposed to apply pipe dope (thread sealant) over top of the Teflon Tape, and always leave the first two threads bare, especially on a sensitive component, such as a diaphragm gas valve.

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว +7

      Great point!

    • @cefgil3905
      @cefgil3905 ปีที่แล้ว +3

      @@adamshebel2320 some of it can get sniped off while threading the pipe in, which could cause a failure in the system.

    • @enconmechanical5652
      @enconmechanical5652 หลายเดือนก่อน

      No you don't have to apply thread sealant.

  • @josephrajaram3131
    @josephrajaram3131 25 วันที่ผ่านมา +1

    Thanks for sharing and helping the poor,❤❤❤❤❤❤❤ from New York.

    • @TaddyDigest
      @TaddyDigest  25 วันที่ผ่านมา

      Thanks for watching!

  • @jeremywinegar7721
    @jeremywinegar7721 11 หลายเดือนก่อน +1

    What a guy! Been in the trade for about 10 years. You are doing it right bro. Great video.

  • @agostinodibella9939
    @agostinodibella9939 ปีที่แล้ว +2

    I once had my gas heater not start some years ago with a pressure switch error. It turned out the port on the switch had a blockage. Since then, every October I put a straightened paper clip in the port to make sure it stays clear. I also keep a spare hot surface igniter and blower capacitor around in case I need them.

  • @franciscotejeda1461
    @franciscotejeda1461 ปีที่แล้ว +3

    Excelent video Taddy n Merry Christmas

  • @cheftoe_7368
    @cheftoe_7368 22 ชั่วโมงที่ผ่านมา +1

    Great video! 👍

  • @thomasdaddy7156
    @thomasdaddy7156 ปีที่แล้ว +1

    Great video where were you 25 years ago when I started working on HVAC equipment so glad to see a Vectren technician taking the time to show the Next Generation how to do it right appreciate you taking the time thank you

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว

      You're welcome my friend i'm glad to be here

  • @tdoanntap
    @tdoanntap หลายเดือนก่อน +1

    Wow… you’re very knowledgeable and excellent instructor. You’re helping me save some money for sure. For that reason, I am subscribed to your channel. Great job and keep up the work!

    • @TaddyDigest
      @TaddyDigest  หลายเดือนก่อน

      Thanks! I am glad this video was helpful.

  • @eastboundtrucking
    @eastboundtrucking 23 วันที่ผ่านมา +1

    Thanks!

    • @TaddyDigest
      @TaddyDigest  23 วันที่ผ่านมา

      You're welcome.Thank you so much for your support.

  • @tinysand3517
    @tinysand3517 17 วันที่ผ่านมา +1

    you are good man Tad, God bless you and your family.

    • @TaddyDigest
      @TaddyDigest  17 วันที่ผ่านมา

      Thank you, I really appreciate it!

  • @TheRicardo7500
    @TheRicardo7500 ปีที่แล้ว +2

    Thanks Taddy as always, for bringing us another great video. I wish you had a school here in Houston to take the training. Thanks to your videos I have done some maintenance here at my house and even replaced a faulty board, of course I follow safety first. You have no idea how much $$$ I have saved. Thank you sir and keep up the good work.

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว

      you're welcome my brother glad to hear 🙏 🙌 👍
      Knowledge is power

  • @joelrivera3509
    @joelrivera3509 11 วันที่ผ่านมา +1

    Man I like your attitude giving back make others happy make you happy it’s a bible statement always work! Blessings to you!

    • @TaddyDigest
      @TaddyDigest  11 วันที่ผ่านมา

      Thanks for the kind words and blessings!

  • @impartiendovida2377
    @impartiendovida2377 หลายเดือนก่อน +1

    Great Taddy learning a lot with your videos

  • @emmanuelnii9027
    @emmanuelnii9027 20 ชั่วโมงที่ผ่านมา +1

    Thanks, you're doing a great job, keep it up

  • @hvac.tech0
    @hvac.tech0 27 วันที่ผ่านมา +1

    God bless you brother that was a good and powerful message at the end

  • @lilalex4194
    @lilalex4194 ปีที่แล้ว +1

    Thanks for the information brother. I’m an Installer from Cali for a year and a half as of now so, these videos help me understand what I’m installing

  • @3aOpinion
    @3aOpinion 10 หลายเดือนก่อน +1

    Thank you!
    It's har to find honest people now days..
    Ps. I don't mind to pay but no days we get overcharged and lied about parts etc..
    Thank you again!

  • @ajay6853
    @ajay6853 ปีที่แล้ว +2

    Love your videos. Thanks for sharing your knowledge and experience. Worth it's weight in gold for sure. Glad I found your channel!

  • @darkdepth1991
    @darkdepth1991 ปีที่แล้ว +1

    Respect man, you know so much stuff !

  • @leslewis5038
    @leslewis5038 3 หลายเดือนก่อน +1

    Excellent, Very helpful. Great attitude. Maintenance guy Colorado. Thanks for the info .

    • @TaddyDigest
      @TaddyDigest  3 หลายเดือนก่อน

      You're welcome.Thank you so much for watching.I'm glad the video was helpful

  • @pkeeonline
    @pkeeonline ปีที่แล้ว +1

    Good training video for diy person and students

  • @domenicolores6698
    @domenicolores6698 11 หลายเดือนก่อน +1

    Thanks!

    • @TaddyDigest
      @TaddyDigest  11 หลายเดือนก่อน +1

      Thank you as well
      I really appreciate your support

  • @eugenelofton8087
    @eugenelofton8087 หลายเดือนก่อน +1

    Excellent explination. i will be joining you.

  • @craigmarshall40
    @craigmarshall40 ปีที่แล้ว +1

    Great video thank you for taking the time to share with us 😊

  • @mahabubulalamshusom6327
    @mahabubulalamshusom6327 ปีที่แล้ว +1

    Thanks for shareing these useful videos of HVAC Gas heat.

  • @Josh.85
    @Josh.85 ปีที่แล้ว +1

    I love that pipe dope it never hardens in the winter like pro-dope does here is the frosty North of Canada

  • @tomasramirez1984
    @tomasramirez1984 ปีที่แล้ว +1

    Hi taddy thank you so much.

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว +1

      You're welcome my friend please share the video when you can

  • @30rdmaga
    @30rdmaga 3 หลายเดือนก่อน

    Awesome video. Love seeing good people in this field of business. You're the man!

    • @TaddyDigest
      @TaddyDigest  3 หลายเดือนก่อน +1

      I appreciate that!

  • @somchaynorasing9296
    @somchaynorasing9296 9 หลายเดือนก่อน +1

    Thank you so much Taddy. You are the best. Thank you again for helping

    • @TaddyDigest
      @TaddyDigest  9 หลายเดือนก่อน

      You're welcome I'm glad that I was able to help you my brother.

  • @Hvacnc
    @Hvacnc ปีที่แล้ว +1

    I’m finding a lot of the ports where the pressure switch goes to become loose. Trane and Rheem products

  • @eduardomercado3691
    @eduardomercado3691 ปีที่แล้ว +2

    Thanks for sharing your knowledge you are a honest person we have a service guy doing our hot water boiler in our condo building saying the set temperature is not holding and it shuts the boiler off I wonder what's wrong

  • @ikecrook1450
    @ikecrook1450 ปีที่แล้ว +1

    I agree you have to adjust your price do to situation. I work in Newport Beach there prices would not work for back east

  • @tommajor4995
    @tommajor4995 9 หลายเดือนก่อน +1

    You’re awesome brother!…great explanation!!…God Bless You!!

    • @TaddyDigest
      @TaddyDigest  9 หลายเดือนก่อน +1

      I'm here to help my brother
      Thank you for being here
      Thank you for watching

  • @keovongvilaykeo4799
    @keovongvilaykeo4799 ปีที่แล้ว +1

    Great Info thank You 🙏 😊 for Sharing

  • @carlosbarcelo2010
    @carlosbarcelo2010 ปีที่แล้ว +1

    ❤❤❤❤❤❤You are the best thank you so much ❤❤❤❤Excellent work waooo ❤❤❤❤❤

  • @TomLawson05
    @TomLawson05 ปีที่แล้ว +1

    Great job taddy very informative thanks for the video

  • @virus_cocmx6395
    @virus_cocmx6395 ปีที่แล้ว +1

    Muy buen video ! Felicidades y por eso Dios te bendice con más trabajo 🙏

  • @JorgeRamirez-gi9pt
    @JorgeRamirez-gi9pt 11 หลายเดือนก่อน +2

    Hello my brother tha ls for your video thanks to share ur knowledge it's the first do I watch ur video u are amazing ..q DIOS t bendiga a ti y ru Familia!!

  • @felixfernandez442
    @felixfernandez442 ปีที่แล้ว +1

    EXELENT explanation

  • @joro8604
    @joro8604 24 วันที่ผ่านมา

    You warm my heart.

  • @LegendKiller2073
    @LegendKiller2073 ปีที่แล้ว +1

    Big Taddy! Great video!

  • @juanvela86
    @juanvela86 2 หลายเดือนก่อน

    This guy is the best

  • @varandavakian
    @varandavakian ปีที่แล้ว +1

    thx for this video enjoyed it, I see your from Iran

  • @MrtoSammy
    @MrtoSammy 28 วันที่ผ่านมา +1

    thanks Tadd great video

    • @TaddyDigest
      @TaddyDigest  28 วันที่ผ่านมา

      You're welcome, brother.Thank you so much for watching

  • @thomasgregory8941
    @thomasgregory8941 22 วันที่ผ่านมา +1

    Great video. You are good.

    • @TaddyDigest
      @TaddyDigest  22 วันที่ผ่านมา

      Thank you so much for your support!

  • @josealfonsokuryortega2229
    @josealfonsokuryortega2229 ปีที่แล้ว +1

    Gracias por esos contenidos, a mi me an ayudado mucho tus videos. Dios te bendiga siempre.

  • @BridgeWater94
    @BridgeWater94 ปีที่แล้ว +1

    AWESOME love
    These type of videos.
    Do more like these

  • @alfredhines505
    @alfredhines505 หลายเดือนก่อน +1

    Thank you brother, u r the best.

    • @TaddyDigest
      @TaddyDigest  หลายเดือนก่อน

      You're welcome my friend

  • @IXArcanine
    @IXArcanine ปีที่แล้ว +1

    Great video dude. I'm glad you addressed the drip leg because I was thinking it when you were taking the pipe off. Also I just use a paper clip to clean the orifices. I deal with a lot of propane and oil where I work. This video was good for me to watch because it keeps me aware of things to pay attention to and not to overlook since I do it so often.

    • @TaddyDigest
      @TaddyDigest  ปีที่แล้ว

      Good tip Paper clip is a good tool for cleaning those

  • @jasonredman2265
    @jasonredman2265 10 หลายเดือนก่อน +2

    Love that liquid tight drain line 😂

  • @roberts1159
    @roberts1159 ปีที่แล้ว +1

    Thank you for helping a person in need. Question about the configuration of the gas piping. The orientation of that tee is really doing nothing using the branch as a dirt leg. Correct ? Realize given what you had to work with that would have complicated things to redo. Appreciate you sharing your knowledge.

  • @antoniomontelongo6824
    @antoniomontelongo6824 29 วันที่ผ่านมา

    Great work tad

  • @philipchacko2194
    @philipchacko2194 ปีที่แล้ว +1

    very nice explanation... God bless you

  • @ИгорьКотов-з4д
    @ИгорьКотов-з4д 8 วันที่ผ่านมา

    Thank you man

  • @MAXEDITZ740
    @MAXEDITZ740 หลายเดือนก่อน +1

    Very good video and nice splendid thanks for

    • @TaddyDigest
      @TaddyDigest  หลายเดือนก่อน

      So nice of you

  • @ramoncaraballo9097
    @ramoncaraballo9097 ปีที่แล้ว +1

    Awesome trainer!!!!

  • @PCReady-AMD
    @PCReady-AMD 15 วันที่ผ่านมา +1

    that is amazing

  • @yargen59
    @yargen59 ปีที่แล้ว +1

    I brougth a conversion kit from the repair clinic, didn't have the propane pressure spring and can't find a new one I assume that they are the same on all propane gas valves? I like you video's and you seem to be a good down to earth person thanks for the information!

  • @nicolekrys
    @nicolekrys 2 หลายเดือนก่อน +1

    very good info

  • @lt4sammy131
    @lt4sammy131 ปีที่แล้ว +1

    Wonderful video. Awesome dude.

  • @extremeair1199
    @extremeair1199 ปีที่แล้ว +1

    Wow much respect!!

  • @alvarolucio8264
    @alvarolucio8264 9 หลายเดือนก่อน +1

    Boa Noite sou daqui do Brasil tira uma dúvida esta parte que faz o aquecimento do gás, não corre o risco de explosão quando for fazer brasagem? Parabéns