It's a nightmare. I'm literally freezing in my house trying to set this useless thermostat. I wouldn't have bought this house if I'd known how unnecessarily difficult it would be to operate.
Does anyone know how to limit this thermostat to not go past a certain temperature example not go past 75 degrees because my dad keeps setting it to 80 degrees and it’s literally killing me told him just wear more clothes or use a blanket but he wants to crank it up and walk in shorts and a tank top
What a horrible design. A thermostat should never have any function which requires reading the manual, like "hold both buttons for 5 seconds". Most of the time, people don't purchase a thermostat themselves, it's already installed in their home or building, so they don't have the manual. Every function should be immediately obvious from looking at the thermostat.
Hi Clark, we recommend verifying the power on your thermostat. Before it reboots does it goes completely blank? Are all the wires connected properly? Please feel free to contact t our phone support team at 1-800-468-1502 or you can send us a private message on our Facebook or Twitter page under "Honeywell Home". We'll be glad to assist you with further troubleshooting. Thank you. - Laura
The problem I’m having is that the ac stays on for 3min turns off for 1min for that min the heater blower turns on which in results in hot hair coming out, then the ac turns on again for 3 min the same thing over and over
How do you clear all past schedule settings quickly and easily, so when you select a temperature, it’s not overridden by previous selections that aren’t apparent? This unit is so basic that it’s very inconvenient to use.
Hi Steph, this model doesn't have the option to clear all the periods. Below I listed the link for the manual, on page 12 you'll find the instructions for programming. customer.resideo.com/resources/techlit/TechLitDocuments/33-00000s/33-00102EF.pdf -Joey
Hello Steph! Thank you for contacting us. We are happy to show you how to help you showing how to hold permanently the temperature. First set the thermostat to heat/cool mode and select the desire temperature. Press the HOLD button right after selecting the temperature. If you want to change the temperature again, you can repeat the same process. We invite you to send us a Private Message through Facebook, if further assistance is needed. Find us under the same name "Honeywell Home". -Alex
Hi Born Filipina, we can take a closer look at this for you, can you provide us with the full model number printed on the backside of the faceplate? -Joey
my thermostat does not display am or pm. I am having trouble programming after replacing batteries. do I need to use all military time settings and how do I know if am or pm?
Hi Linda, Please see the following direction to access the time format. -Joey 1. Press and hold the up and down arrow until the screen changes. 2. You will see a large number 1 displayed on the left, press the up and down arrow at the same time to display the number 2 on the left. 3. The number on the right of the 2 is going to be your time format setting, You will want to change the number on the right to display 1 by tapping the up arrow, continue pressing the up and down arrow at the same time until the home screen displays, once complete the unit will show a 24-hour display.
Wires I’d guess. Do you have a c wire or just battery function? I don’t really set times in mine besides Friday and the actual time I let it run 73 during the day. Then before bed 70 degrees
On my Th 4210 how do I get into "settings" and then "preferences" then "smart response technology" to turn "recovery mode" off (and to turn off "energy saving mode" ? Thanks
Hello! Thank you for contacting us. We are happy to help you! In order for us to properly assist you, we require the full model number of your thermostat. We have two different models, the TH4210U2001 and the TH4210D1005. Once we have this information we can guide you step by step on disabling the feature. -Alex
Thanks! To access the Installer setup, press and hold the up and down arrows until you see a large #1 (function number) and a small number next to it (setting number). Use the up arrow to advance to next function and look for #13 (Adaptive Intelligent Recovery/ Smart Response). Use the down arrow to change the setting number on #1 (to enable it) or #0 (to disable it). Once you finish, press and hold both arrows to save and exit. If you require further assistance we invite you to contact us at at us at 1-800-633-3991, or through Twitter and Facebook under Honeywell Home. -Alex
Just performed that procedure and it WAS on 1 so I switched to 0 ! We will see what happens in the morning when it usually has been going into recovery mode about 2 hours before the heat is scheduled to come on. Thanks sooooo. much for the help Alex!. AWESOME customer service!@@honeywellhome
Thanks for reaching out to us Aricia! The thermostat is configured as per default to recognize your system as a Gas or Oil Furnace, if you have a water heater system that works on electricity or an electrical boiler, there's a particular step in the configuration you need to go through: 1. On the back of the thermostat there's a switch you need to check that it's on ''electric'' and not Gas/Oil. 2. After you put the thermostat back on the wall, press and hold the Up and Down arrows for 4-5 seconds. 3. According to the numbers you see, let me know and I will tell you which is the right one for Water Heater / Boilers. Note: These thermostats are not compatible with series 20 or normally open zone valves in water systems. -Tony
This thermostat is garbage. It doesn’t start up when you needed it too. Always stops when force to heat up during freezing temperatures me and my husband has been playing with it. Still to no avail I might just need to pick up a new one not so complicated like this.
Hi, VeloxSZN. Thank you for contacting us! Please, send us Direct Message to any of our social media, like Facebook, Instagram or Twitter so we can do some troubleshoot. Let us know the wiring installation you did, by sending us a picture of the wires at the wall plate. -Alex
Hi, I am having an issue with this termostat not shutting off my zone valve on a 3 wire white and Rodgers zone. it turns it on fine but wont shut the zones off. it appears to be wired and set up correctly but it has to be a wiring issue as all zones are acting the same way and all were fine before swapping the thermostats. is there anything particular that you have to do to this with a hot water boiler other than setting the cycle to 3?
Hi John! We'd like to have the opportunity to assist you with this process. When you have a moment, please contact our tech support team at 1-800-468-1502, or through Facebook and Twitter under Honeywell Home. We look forward to hearing from you soon. -Charlie
@@honeywellhome I called them but they said it’s not compatible. Does that sound right. It’s a 3 wire rogers and white zone valve. I just can’t get it to shut the zone off.
Hi Michel, thanks for reaching out! If you change the temperature setpoint in unoccupied mode, the controller temporarily bypasses the current setpoint. -Charlie
Setting says to use 3 for a hot water or high efficiency hot water system. I have a regular efficiency hot water system. Does this mean that I use option 3?
We just got one and I got the date an times set took a min to figure it out but I dont want any preset temp times schedule I read the instructions it says press hold and it will be perm so I can adjust my temp at will but I press hold and it stays on temporary. In the South when its 120 an muggy I want to change my air myself how do I get it to Perm so I can control it. And btw this one vs my old honeywell is cheap plastic not near as thick as the old one.
Hi Nan C, thank you for contacting us. If you change the set point, the thermostat will change to a temporary Hold. If you press the Hold button you will only see 'Hold' on the screen and it will be a permanent hold. -Maria
Hi Obed, thank you for bringing this to our attention. We will be happy to help troubleshooting to verify if this is a thermostat or heating system issue. You can reach out to our team at (800) 633-3991 or send us a Private Message to our Honeywell Home Facebook account. -Maria
Hello, Pat! Thank you for contacting us. We are happy to help you. This thermostat goes back to show you the indoor temperature once you stop pressing its buttons. If you have any further questions, feel free to send us a Direct Message through Facebook. -Alex
Hello Crystal, Thank you for contacting us. We are happy to help you checking on the unit. This thermostat is a programmable only model, it has a default schedule on it. If you do not want to use it you could set all the periods to the same temperature so it will not change during the day. If you need assistance setting it, please, reach us through Direct Message on Facebook. -Alex
Hi, the ambient (measured) temperature is normally displayed. To view the setpoint temperature, press the Up or Down button once. The set temperature will appear for five seconds. If you require further assistance, feel free to contact us at 1-800-633-3991 or connect with us on Twitter and Facebook at Honeywell Home. -Jerry
Hi James, how many total wires do you have and which terminals are being used on the thermostat that you will replace? We would like to know Color of wire-Terminal (letter). - Maria
Hi Micah, for the RTH2300 to work on manual more we recommend to tap on the temperature arrows and as soon as you do press the hold button to set the device on hold (manual mode). -Ivan
Hi, Emily! Thank you for contacting us. We will be happy to help you. If you have the model RTH2300 You would need to access to the ISU (Press and hold the two arrows at the same time). And look for the item #40, change the small number to 1, the press "Run" to save the changes made. -Alex
Hello Qusei! Thank you for contacting us. We are happy to help you checking on this situation. Please send us a Direct message on Facebook and provide your the indoor and set temperature and include the wiring information. You can find us under the same name "Honeywell Home". -Alex
Hi, Seanytoyguns! Thank you for contacting us. Unfortunately, this is a very basic thermostat and it just have the option to reset the Schedule no the Internal Setup. If you want us to help you going through the process, please reach us via Facebook, Instagram or Twitter. -Alex
Hi Adam, thank you for reaching out to us. We will be happy to help you with this. Next time that this happens, please take a picture of the thermostat screen and send it to us. We would need to check if it shows 'Hold', what are the inside and set temperatures and if it shows 'Heat On' to verify where should we start troubleshooting, You can send us a private message to our Honeywell Home Facebook account. -Maria
Hello, Thad! Thank you for contacting us. We are happy to help you. Please reach us by Direct message through Facebook, Instagram or Twitter and provide us the specific model number of your device. Also let us know what is the Indoor temperature, setpoint and system mode. -Alex
Hi Chris, thank you for contacting us. Press SET until Set Schedule is displayed, then press Up or Down to set your weekday Wake time (Mo-Fr), then press SET. Press Up or Down to set the temperature for this time period, then press SET. Set time and temperature for the next time period (Leave). Repeat steps for each weekday time period. Press SET to set weekend time periods (Sa & Su), then press RUN to save & exit. -Maria
Buenos días, si tiene alguna consulta o duda acerca del funcionamiento de nuestros dispositivos podría hacermela por este medio, o en todo caso la invito a darnos una llamada al 18004681502, nuestros horarios de atención son de lunes a viernes de 9am a 8pm CT, y en fin de semana de 9am a 5pm CT. Que tenga un buen día y gracias por contactar a Resideo Honeywell Home. -Tony
And now they want me to pay to speak to a technician when the damn thing hasn’t worked correctly since we put it in this afternoon! Won’t kick on and off by itself even after the permanent override! I hate this product.
Totally unreliable. Room temp can be 6 -7 degrees above what set Temp should be the same 24 hours. someone always home. Have had 2 knowledgeable people try to correct. Unable to make it better. Horrible. The heating bill will be higher than ever.
Hello Elaine, thank you for contacting us. If you’re still experiencing this inconvenience with the connection, we would be happy to assist you. Please, feel free to reach out to us on social media with a private message for support. -Alex
Hi Nick, we are sorry to hear about this. You will find the manual for your RTH2300 thermostat here: digitalassets.resideo.com/damroot/Original/10014/33-00102EF.pdf?_gl=1*dxkbp4*_gcl_au*Nzc1OTY3NDIyLjE3MDU3NjM3OTU. Please let us know what you need assistance with and we will be happy to help. -Maria
I hate this thermostat
Me too it was in a house I bought I miss my old thermostat.
Me too
It's a nightmare. I'm literally freezing in my house trying to set this useless thermostat. I wouldn't have bought this house if I'd known how unnecessarily difficult it would be to operate.
Does anyone know how to limit this thermostat to not go past a certain temperature example not go past 75 degrees because my dad keeps setting it to 80 degrees and it’s literally killing me told him just wear more clothes or use a blanket but he wants to crank it up and walk in shorts and a tank top
I hate this thermostat too
What a horrible design. A thermostat should never have any function which requires reading the manual, like "hold both buttons for 5 seconds". Most of the time, people don't purchase a thermostat themselves, it's already installed in their home or building, so they don't have the manual. Every function should be immediately obvious from looking at the thermostat.
This makes it more complicated tbh 😮
I set to 70 but the temperature keeps going up and not to my set point
I hate this thermostat too
Can someone tell me how to just change the temp to colder and not have it go to temporary. Like just stay at the temperature I pick
What is the best "Function 5" setting to choose for electric air conditioning only?
Why does the furnace run intermittently when it's set to off? How do I change that?
Hi,
I have RTH2300B thermostat and it resets by itself every 2-3 hours. How do I avoid this issue?
Hi Clark, we recommend verifying the power on your thermostat. Before it reboots does it goes completely blank? Are all the wires connected properly? Please feel free to contact t our phone support team at 1-800-468-1502 or you can send us a private message on our Facebook or Twitter page under "Honeywell Home". We'll be glad to assist you with further troubleshooting. Thank you. - Laura
Hi Norma,
Thanks for reaching out. What type of batteries are you using? -Joey
The problem I’m having is that the ac stays on for 3min turns off for 1min for that min the heater blower turns on which in results in hot hair coming out, then the ac turns on again for 3 min the same thing over and over
I need help
How do you clear all past schedule settings quickly and easily, so when you select a temperature, it’s not overridden by previous selections that aren’t apparent? This unit is so basic that it’s very inconvenient to use.
Hi Steph, this model doesn't have the option to clear all the periods. Below I listed the link for the manual, on page 12 you'll find the instructions for programming.
customer.resideo.com/resources/techlit/TechLitDocuments/33-00000s/33-00102EF.pdf -Joey
Hello Steph! Thank you for contacting us. We are happy to show you how to help you showing how to hold permanently the temperature.
First set the thermostat to heat/cool mode and select the desire temperature. Press the HOLD button right after selecting the temperature.
If you want to change the temperature again, you can repeat the same process.
We invite you to send us a Private Message through Facebook, if further assistance is needed. Find us under the same name "Honeywell Home". -Alex
Hi Born Filipina, we can take a closer look at this for you, can you provide us with the full model number printed on the backside of the faceplate? -Joey
my thermostat does not display am or pm. I am having trouble programming after replacing batteries. do I need to use all military time settings and how do I know if am or pm?
Hi Linda,
Please see the following direction to access the time format. -Joey
1. Press and hold the up and down arrow until the screen changes.
2. You will see a large number 1 displayed on the left, press the up and down arrow at the same time to display the number 2 on the left.
3. The number on the right of the 2 is going to be your time format setting, You will want to change the number on the right to display 1 by tapping the up arrow, continue pressing the up and down arrow at the same time until the home screen displays, once complete the unit will show a 24-hour display.
Ty sooo much
My new AC won't come on. What's wrong? I reset it for M-F and S/S but nada. Help!!!
Wires I’d guess. Do you have a c wire or just battery function? I don’t really set times in mine besides Friday and the actual time I let it run 73 during the day. Then before bed 70 degrees
On my Th 4210 how do I get into "settings" and then "preferences" then "smart response technology" to turn "recovery mode" off (and to turn off "energy saving mode" ? Thanks
Hello! Thank you for contacting us. We are happy to help you! In order for us to properly assist you, we require the full model number of your thermostat. We have two different models, the TH4210U2001 and the TH4210D1005. Once we have this information we can guide you step by step on disabling the feature. -Alex
Alex - it's the TH4210D1005@@honeywellhome
Thanks! To access the Installer setup, press and hold the up and down arrows until you see a large #1 (function number) and a small number next to it (setting number).
Use the up arrow to advance to next function and look for #13 (Adaptive Intelligent Recovery/ Smart Response). Use the down arrow to change the setting number on #1 (to enable it) or #0 (to disable it). Once you finish, press and hold both arrows to save and exit.
If you require further assistance we invite you to contact us at at us at 1-800-633-3991, or through Twitter and Facebook under Honeywell Home. -Alex
Just performed that procedure and it WAS on 1 so I switched to 0 ! We will see what happens in the morning when it usually has been going into recovery mode about 2 hours before the heat is scheduled to come on. Thanks sooooo. much for the help Alex!. AWESOME customer service!@@honeywellhome
Thank you! Feel free to contact us back if you have more questions. Have a wonderful rest of you weekend! -Alex
My family just unstalled our new one we verified the wiring and our air still wont come on we have a water heater but idk if that affects anything
Thanks for reaching out to us Aricia! The thermostat is configured as per default to recognize your system as a Gas or Oil Furnace, if you have a water heater system that works on electricity or an electrical boiler, there's a particular step in the configuration you need to go through:
1. On the back of the thermostat there's a switch you need to check that it's on ''electric'' and not Gas/Oil.
2. After you put the thermostat back on the wall, press and hold the Up and Down arrows for 4-5 seconds.
3. According to the numbers you see, let me know and I will tell you which is the right one for Water Heater / Boilers.
Note:
These thermostats are not compatible with series 20 or normally open zone valves in water systems. -Tony
Thank you.
This thermostat is garbage. It doesn’t start up when you needed it too. Always stops when force to heat up during freezing temperatures me and my husband has been playing with it. Still to no avail I might just need to pick up a new one not so complicated like this.
just installed one and the air is always hot
Hi, VeloxSZN. Thank you for contacting us!
Please, send us Direct Message to any of our social media, like Facebook, Instagram or Twitter so we can do some troubleshoot.
Let us know the wiring installation you did, by sending us a picture of the wires at the wall plate. -Alex
Mine is on sleep mode and just coming on how do I program ?
Hi Aaron, this model doesn't have a sleep mode. What is occurring with the thermostat? -Joey
Hi, I am having an issue with this termostat not shutting off my zone valve on a 3 wire white and Rodgers zone. it turns it on fine but wont shut the zones off. it appears to be wired and set up correctly but it has to be a wiring issue as all zones are acting the same way and all were fine before swapping the thermostats. is there anything particular that you have to do to this with a hot water boiler other than setting the cycle to 3?
Hi John! We'd like to have the opportunity to assist you with this process. When you have a moment, please contact our tech support team at 1-800-468-1502, or through Facebook and Twitter under Honeywell Home. We look forward to hearing from you soon. -Charlie
@@honeywellhome I called them but they said it’s not compatible. Does that sound right. It’s a 3 wire rogers and white zone valve. I just can’t get it to shut the zone off.
If it is not compatible we recommend you reaching out to your HVAC professional to help you find a suitable replacement. -Maria
Any way to turn off the unoccupied fonction on TH146-N-2H1C thermostat? Thank you
Hi Michel, thanks for reaching out! If you change the temperature setpoint in unoccupied mode, the controller temporarily bypasses the current setpoint. -Charlie
Setting says to use 3 for a hot water or high efficiency hot water system. I have a regular efficiency hot water system. Does this mean that I use option 3?
Hi John! That's correct, use the option 3 if you have a Hot Water System or a High-Efficiency Gas Furnace. -Charlie
We just got one and I got the date an times set took a min to figure it out but I dont want any preset temp times schedule I read the instructions it says press hold and it will be perm so I can adjust my temp at will but I press hold and it stays on temporary. In the South when its 120 an muggy I want to change my air myself how do I get it to Perm so I can control it. And btw this one vs my old honeywell is cheap plastic not near as thick as the old one.
Hi Nan C, thank you for contacting us. If you change the set point, the thermostat will change to a temporary Hold. If you press the Hold button you will only see 'Hold' on the screen and it will be a permanent hold. -Maria
@honeywellhome is there no way to remove a permanent hold? This is insane
@@AlbertoSantosDumont819Press run ya silly
We are freezing it says it’s 35 degrees in the house and I turn the heater up to 77 but still only gets up to 55 😡
Hi Obed, thank you for bringing this to our attention. We will be happy to help troubleshooting to verify if this is a thermostat or heating system issue. You can reach out to our team at (800) 633-3991 or send us a Private Message to our Honeywell Home Facebook account. -Maria
Just installed and heat will not turn on
Change the battery and I still don't see no numbers on the
Why does it go down to 69 when I set it for 72 before the heat comes on?
Hello, Pat! Thank you for contacting us. We are happy to help you.
This thermostat goes back to show you the indoor temperature once you stop pressing its buttons.
If you have any further questions, feel free to send us a Direct Message through Facebook. -Alex
I found out what I was do wrong.@@honeywellhome
I HAVE TRIED EVERYTHING AND THE THING COMES ON RANDOM TIMES
Hello Crystal, Thank you for contacting us. We are happy to help you checking on the unit. This thermostat is a programmable only model, it has a default schedule on it. If you do not want to use it you could set all the periods to the same temperature so it will not change during the day.
If you need assistance setting it, please, reach us through Direct Message on Facebook. -Alex
Hi Adam, we're sorry to hear you're having trouble with your unit. Please let us know if we can help. -Joey
How to get it back to normal after that
One would think Honeywell could design a thermostat that a customer can read. My eyesight is not bad, but I need a magnifier to read am or pm.
Any way to adjust Swing or CPH?
Hi Bill, there thermostat doesn't have an adjustment for swing or CPH. -Paul
Mine keeps dropping temperature after I set it
Hi, the ambient (measured) temperature is normally displayed. To view the setpoint temperature, press the Up or Down button once. The set temperature will appear for five seconds. If you require further assistance, feel free to contact us at 1-800-633-3991 or connect with us on Twitter and Facebook at Honeywell Home. -Jerry
Why do my numbers have the exact same as the video and it wont cool down . I’m frying over here
How do I hook up the 2300 HTR thermostat
Hi James, how many total wires do you have and which terminals are being used on the thermostat that you will replace? We would like to know Color of wire-Terminal (letter). - Maria
How do you override it so it operates like a normal ac? No setting this or that
Hi Micah, for the RTH2300 to work on manual more we recommend to tap on the temperature arrows and as soon as you do press the hold button to set the device on hold (manual mode). -Ivan
My thermostat is stuck on 83° hold. How do I remove the hold so I can pick which degree I want i want at anytime.Please help
Hi how do I reset the schedule?
Hi, Emily! Thank you for contacting us. We will be happy to help you. If you have the model RTH2300 You would need to access to the ISU (Press and hold the two arrows at the same time). And look for the item #40, change the small number to 1, the press "Run" to save the changes made. -Alex
Every time I set this thermostat to a heat it doesn’t work
Hello Qusei! Thank you for contacting us. We are happy to help you checking on this situation.
Please send us a Direct message on Facebook and provide your the indoor and set temperature and include the wiring information.
You can find us under the same name "Honeywell Home". -Alex
How do you do a factory reset
Hi, Seanytoyguns! Thank you for contacting us. Unfortunately, this is a very basic thermostat and it just have the option to reset the Schedule no the Internal Setup. If you want us to help you going through the process, please reach us via Facebook, Instagram or Twitter. -Alex
@@honeywellhome”very basic thermostat”
En español porfavor
Hate this thermostat, keep raising it up 80 or 84 n have it on hold, and the shit goes down on 59 like wtf I'm trying stay warm
Hi Adam, thank you for reaching out to us. We will be happy to help you with this. Next time that this happens, please take a picture of the thermostat screen and send it to us. We would need to check if it shows 'Hold', what are the inside and set temperatures and if it shows 'Heat On' to verify where should we start troubleshooting, You can send us a private message to our Honeywell Home Facebook account. -Maria
Having the same problem my one year old and I are freezing 😢
Heater isn’t going up in temp.. we are freezing….
Hello, Thad! Thank you for contacting us. We are happy to help you.
Please reach us by Direct message through Facebook, Instagram or Twitter and provide us the specific model number of your device. Also let us know what is the Indoor temperature, setpoint and system mode. -Alex
Garbage 1990s interface was fine until I touched the stupid settings
Kind of confusing...doesn't really show how to program for days of the week and weekends.
Hi Chris, thank you for contacting us. Press SET until Set Schedule is displayed, then press Up or Down to set your weekday Wake time (Mo-Fr), then press SET. Press Up or Down to set the temperature for this time period, then press SET. Set time and temperature for the next time period (Leave). Repeat steps for each weekday time period. Press SET to set weekend time periods (Sa & Su), then press RUN to save & exit. -Maria
En españo!!!!!!!!!
Buenos días, si tiene alguna consulta o duda acerca del funcionamiento de nuestros dispositivos podría hacermela por este medio, o en todo caso la invito a darnos una llamada al 18004681502, nuestros horarios de atención son de lunes a viernes de 9am a 8pm CT, y en fin de semana de 9am a 5pm CT. Que tenga un buen día y gracias por contactar a Resideo Honeywell Home. -Tony
If i could toss this over in the river i would we are freezing and no luck
And now they want me to pay to speak to a technician when the damn thing hasn’t worked correctly since we put it in this afternoon! Won’t kick on and off by itself even after the permanent override! I hate this product.
I hate it too ugh
Where is battery
Hi Sharon, thanks for reaching out! The batteries section is on the back of the thermostat face plate. -Charlie
You can’t even see the numbers
Totally unreliable. Room temp can be 6 -7 degrees above what set Temp should be the same 24 hours. someone always home. Have had 2 knowledgeable people try to correct. Unable to make it better. Horrible. The heating bill will be higher than ever.
Hello Elaine, thank you for contacting us. If you’re still experiencing this inconvenience with the connection, we would be happy to assist you. Please, feel free to reach out to us on social media with a private message for support. -Alex
I think I’m finally ready to unalive myself
This is the poorest instructions ever given and an even lousier thermostat.
I hate this thermostat so much
You were no help at all
This video didn't help a bed if we had the owners manual we know what to do. We moved in an apartment don't have it so thanks for nothing
Hi Nick, we are sorry to hear about this. You will find the manual for your RTH2300 thermostat here: digitalassets.resideo.com/damroot/Original/10014/33-00102EF.pdf?_gl=1*dxkbp4*_gcl_au*Nzc1OTY3NDIyLjE3MDU3NjM3OTU. Please let us know what you need assistance with and we will be happy to help. -Maria
Most stupid thermostat designed
P.O.S. VIDEO
This is just plastic they’re cheap
this is horrible!!!
Boooooooooooo…
Shity system
Shit thermostat tbh