I have a Canon G3060. I did the Maintenance "Deep Cleaning" twice and then did an 'Ink Flush' and it worked great after that. No hypodermic syringe needed. NOT messing around with ink tubes or syringes is a big benefit. The printer did not come with a syringe, so I preferred not to buy one. Try regular maintenance first. If that does not work, then buy a syringe and get your hands inky.
My issue is how can I get super bright color photos? Ever since my canon pixma g7020 came out of the box the color is super light. Bought it to print high quality color labels for my candles and I cant because all color looks faded. Nothing in the settings help it het darker. Is it just that this printer cannot print bright color?
the issue I'm having with it not printing black is that it seems the black ink hose is clogged. the person who i got the printer from must have left it sitting for to long and the hose is completely clogged at the end where it folds in to dispense into the cartridge. i tried pulling it with a syringe, tried pushing a thin toothpick to loosen up the clog. and the ink that comes out seems to be very sticky. i tried rolling the hose to loosen it up but nothing has worked. the heads are clean, and they do run ink through them as that was my first go to. I'm at the point i probably need to replace the hole hose but I'm trying to avoid that since it seems like i have to take apart the hole front and top of the printer apart to reach that little rubber hose. to top it off iv search online for replaceable hoses and have found a few but nothing that match the ones my canon g7020 has. disappointed in this. if there's something i can do to unclog them without having to remove them i would really like to know. everywhere iv searched seems like nobody has come across this issue. or maybe it's an issue not worth fixing? any help will be appreciated.
Hi, you can try this method, clean the ink in the tank where the hose is clogged, replace the ink with warm water then suck the end of the hose with a syringe until the ink is completely gone, then fill the tank with a good printhead cleaning fluid, close the end of the hose with a syringe, then wait for 1 - 2 day before doing the suction. good luck
@@SISCHANNEL_NEW I’ll give that a try. My last resort will be to take my time and remove the hose and let it soak in hot water for 24 hours. Considering I can’t find a replacement. Thank you.
i just performed an ink flush on my G3020 and my printer is now printing colours again great i have a question, where does all the flushed ink go? is there some flushed ink catcher that will need emptying?
My canon MG 3600 series printer is not printing in black and white. My ink is new. On my phone, I select black & white, but it keeps printing in color. Why is that?
Hi brother .I have Epson l3150 printer it doesn't print blank ink and remaining inks are well printed . Daily I take one printout from my printer. If I missed anyone day to take printout , next day will be, black ink only did not print. *What should I do bro??*
this is not needed, simply go to printer properties either through printer queue or through control panel, then go to maintenance, then click on maintenance and preferences and then choose "ink flush" and then chose option black and wait for it to finish and then try nozzle check, it eould have worked
Ya, you're correct, but using Canon properties for ink flushing will reduce the lifespan of the chip maintenance box. Meanwhile, manual ink flushing with a syringe does not affect the chip maintenance box.
Thank you very much. I had the same problem and did an ink flash, as you suggested. You solved my problem. Wish I could double like your comment. You saved me a lot of time😊😊
@@ivyjoydalauyan5195 You just need to do ink flush simply search on youtube, your model no. and add " how to ink flush printer" , you can follow the steps in the video
Hello po! Tried this po pero maraming mga bungi2 pa rin sa black line sa nozzle check. Tapos medjo blurry pa peint ni black sa letters. Thanks po sa pagsagot
![Epson ET 2800, 2803, 2700, 4800 Printhead Cleaning - NOT PRINTING Color, Black, Blank Pages [FIXED!]](http://i.ytimg.com/vi/L1lCvMagC3Q/mqdefault.jpg)
I have a Canon G3060.
I did the Maintenance "Deep Cleaning" twice and then did an 'Ink Flush' and it worked great after that.
No hypodermic syringe needed.
NOT messing around with ink tubes or syringes is a big benefit.
The printer did not come with a syringe, so I preferred not to buy one.
Try regular maintenance first. If that does not work, then buy a syringe and get your hands inky.
Ya, you are absolutely right, this methods is for last option..thank you
perfect solution. i fixed fault myself by your video. thank you so much......👍
Thanks po nagawa na po ang printer ko 2 days pinagvaralan now lang po gumana 💯 ligit
Can you tell about the syringe size and what tool used to suck it out after dipping into hot water?
Hi, you can use a 10ml syringe or more, and the name of the tool is Ink Suction Tool Kit for canon
My issue is how can I get super bright color photos? Ever since my canon pixma g7020 came out of the box the color is super light. Bought it to print high quality color labels for my candles and I cant because all color looks faded. Nothing in the settings help it het darker. Is it just that this printer cannot print bright color?
the issue I'm having with it not printing black is that it seems the black ink hose is clogged. the person who i got the printer from must have left it sitting for to long and the hose is completely clogged at the end where it folds in to dispense into the cartridge. i tried pulling it with a syringe, tried pushing a thin toothpick to loosen up the clog. and the ink that comes out seems to be very sticky. i tried rolling the hose to loosen it up but nothing has worked. the heads are clean, and they do run ink through them as that was my first go to. I'm at the point i probably need to replace the hole hose but I'm trying to avoid that since it seems like i have to take apart the hole front and top of the printer apart to reach that little rubber hose. to top it off iv search online for replaceable hoses and have found a few but nothing that match the ones my canon g7020 has. disappointed in this. if there's something i can do to unclog them without having to remove them i would really like to know. everywhere iv searched seems like nobody has come across this issue. or maybe it's an issue not worth fixing? any help will be appreciated.
Hi, you can try this method, clean the ink in the tank where the hose is clogged, replace the ink with warm water then suck the end of the hose with a syringe until the ink is completely gone, then fill the tank with a good printhead cleaning fluid, close the end of the hose with a syringe, then wait for 1 - 2 day before doing the suction. good luck
@@SISCHANNEL_NEW I’ll give that a try. My last resort will be to take my time and remove the hose and let it soak in hot water for 24 hours. Considering I can’t find a replacement. Thank you.
Hi help me the pipes were ink flow is empty what should I do
i just performed an ink flush on my G3020 and my printer is now printing colours again
great
i have a question, where does all the flushed ink go?
is there some flushed ink catcher that will need emptying?
@@sandwichman100 ya, there is waste ink pad on the bottom (back).. You must cleaning it when he is full
What is ink suction tool
6:12 what is the name of this tool ?
Ini suction toolkit
Thanks for serving the nation, Canon mg2540s, why does it print faded yet there is ink
Can i do this g3020 my promble is printing line by line
My color ink catridge is leaking. Will the suction tool fix this?
Hi can i do this procedure for may canon g1010?
Hi, the procedure is almost the same; the difference is that in the G1010, the lever is integrated with the ink tank...good luck!
My canon MG 3600 series printer is not printing in black and white. My ink is new. On my phone, I select black & white, but it keeps printing in color. Why is that?
fantastic! thanks! it worked!~
th-cam.com/video/ooY6vrSOa7M/w-d-xo.html
How about canon ix 6770?
Disculpa me puedes enseñar como quitar el error E05 es una canon ts3110 gracias
Hi, E05 indicates that your cartridge is not detected; sometimes simply cleaning the cartridge chip will allow it to be recognized again...good luck
U can try the trick in this video to fix it;
th-cam.com/video/O1uZ_LaUg-E/w-d-xo.html
Super
I want to perform it on canon 745s catridges.
me following while watching... oh i need tape... oh i need a syringe. thanks anyways!
Pano po pag nilagyan ink, then nag leak po pabalik pag tanggap ng syringe ehh ? Ty
What if wala pong suction tool ano pwd gawin ?
Hi brother .I have Epson l3150 printer it doesn't print blank ink and remaining inks are well printed . Daily I take one printout from my printer. If I missed anyone day to take printout , next day will be, black ink only did not print.
*What should I do bro??*
Hi, it indicates your ink pump is not working, you can repair it or replace it
After pressing the white part it got stuck or smth what can I do 😭or my dad will kill me 💀
Paano po gawin yung same problem sa canon pixma mg3070s po?
this is not needed, simply go to printer properties either through printer queue or through control panel, then go to maintenance, then click on maintenance and preferences and then choose "ink flush" and then chose option black and wait for it to finish and then try nozzle check, it eould have worked
Ya, you're correct, but using Canon properties for ink flushing will reduce the lifespan of the chip maintenance box. Meanwhile, manual ink flushing with a syringe does not affect the chip maintenance box.
Tnx a lot😊
Thank you very much. I had the same problem and did an ink flash, as you suggested. You solved my problem. Wish I could double like your comment. You saved me a lot of time😊😊
Paano pag walang nakalagay na ink flush after sa nozzle check?
@@ivyjoydalauyan5195 You just need to do ink flush
simply search on youtube, your model no. and add " how to ink flush printer" , you can follow the steps in the video
Same procedure din po pag ang ink is alternate malinaw tas malabo?
you can try it, "Another possible factor could be the quality of your ink. Upgrading to a better quality ink might help improve the outcome."
Hello po, ask ko lang po if same din po ito sa other colors? G1020 po?
Hi, Of course! You can absolutely use the same method...good luck!
print half letter. Do the same procedure again
Hello po! Tried this po pero maraming mga bungi2 pa rin sa black line sa nozzle check. Tapos medjo blurry pa peint ni black sa letters. Thanks po sa pagsagot
Hi, If you've exhausted all troubleshooting methods and the issue persists, it's probably best to consider replacing your cartridge.
@artikgupta7781 Thank you so much.