This boat is a monster when you bring it out it demands attention 👍😎Just wait til you get it to stay planted👀Gotten over 70mph on mine and still haven’t took it to do an actual speed test.So much fun to drive and watch running on the water,but a little scared running on the River right now with all the debris and crap in the water$$
Big B!,,, I’ve noticed batteries back helps my UL19 ride better also. I recently went back to stock straight turn fin, i couldn’t stand the wide turns. Ended up heating it up & putting bend in it. Definitely better. Mad lizard one great if you want em to really hook. can’t wait to watch this ride, stay after it. I Just ordered the tuning gauge.
2:45 minutes into the video and I can tell that thing has some serious muscle!!! Slow motion is so cool. Your receiver battery was 6.0v at 7:44 minutes 😂🤣😂 that transmitter is awesome!!! I love it. The potential here is near limitless, yep it’s guna take some tuning but I’ll be here to see it 👍 thanks for sharing. AWSOME
Thanks Neal, I actually really like the transmitter with the vocal read outs. Once I go to the speed run spot we'll really get to See or should I say hear the GPS read outs in real time. I've got alot of tuning to do but we'll sort it all out.
Thanks again for the info testing etc. I have had my UL 19 a month now done some e tuning & upgrades also have been in the middle of moving and hopefully will get a chance to put it in the water this week ! Will let you know how she does
Have no experience with this type off hull. But she is a ripper for shure. Just think, like you also said, a challenge to set up... I guess its design wants to make it fly, so it will be difficult to find that sweetspot... Also think it needs very calm water too but we will see, maybe i'm totally wrong. It's the reason why i don't have one, that's for sure. But you are the man to do it big B...!
Thanks for naming me as a mentor, I SINCERELY appreciate it. I was thinking smaller prop at first. Temps were a bit up there. It seemed happier with the Oxidean prop. That is FAR too much boat for the park pond now. All those Christmas trees appear inches apart when you're smoking along. I sent you a set of JetStepper plans, just for giggles.
No problem master Yoda! 😆 Yes sir hopefully the wind & weather allows me to run at the river this evening .. Temps were warm bu not hot I switched the cooling.. rudder to the esc & blast to the motor. That should help with Temps.
You turned it into a beast. The setup looks very clean as well 👍I love hydro's. It takes some time to fine tune but dialed in, they fly on the water. I was looking at the bottom design and I noticed the bottom looks flat at the rear. Maybe by adding small ride pads at the back left and right, you could improve stability. Air will be guided out the back between the ride pads and it might prevent flipping. You could temporarily tape them to the bottom just for testing. Cheers! DJ
Watching this video again & learning from testing my UL19. Seems like the strut trim adjustment is almost the most crucial thing for tuning this boat. I found the less my prop is in water the better it runs. Seems in this video it was lifting more from too down strut causing it to lift?
awesome boat build big b,man that thing is going to move when you get her tunned .have a great day.im fixing to get bundled up and go test my Arrow. I just finished my upgrade. Thanks to your knowledge
Salut Iron houaa ton UL19 commence à marcher fort 👍bon certe il n'est pas encore au niveaux de mon UL19 drag boat😜 mais il est déjà très bien pour s'amuser avec tes autres bateaux de courses 😋😜🛴🇨🇵
Man I have a new in the box ul19 hull I was gonna sell but I think I'm gonna build it rail style now with all the reinforced kevlar. Great video too, I can't wait to see more tuning.
Yes sir buddy, put that bad boy to work. Reinforcement with big power is gonna be the ticket. I'm ordering the carbonfiber for mine this weekend. I put the stock turn fin on hopefully the wind corporates this evening.
@@IRONCLADRC I was thinking about the curved turn fin causing lift no matter what cause it has a horizontal surface. Straight fin us gonna be the ticket for speed runs I think
Its a tough one B. Excited to see what route you go with this one. Im not gonna lie, I wanna hit 100 with mine real bad but I called it quits for the season and just going to enjoy it until it warms up. I hit 70 pretty easy but ran out of options of batts, props and talent lmao. This hull loves and hates speed at the same time.
@@IRONCLADRC Oh yea, its going to take a ton of time and precise tweaks to get even close. Im down for the challenge, but not winter diving for parts lmao.
B, is that wing thing between the sponsons adjustable? Just wondering if that would help keep the bow planted. I guess the real question is why does the bow want to lift up in the first place.
Hey b, random blackjack question for you. I watch all your videos. Haven’t seen a 3 blade on the blackjack 42…. The 3 blade by offshore electrics is a popular prop for that boat. Mine runs really well on it. What are your thoughts on that prop for the 42? Thanks
What flex shaft configuration is this? Man that is smooth. Thanks for confirming how I want to set my boats up for turns, not for speed! Ill leave it up to you guys on YT to drag race. H1 scale is my goal.
I'm using a .187 flex 3/16 shaft with no Teflon liner, stock stuffing tube.. 5mm to .187 collet zippkits.com/index.php?main_page=product_info&products_id=384
Warning: Once you fly, you might get really hooked. Ive raced cars, run boats, run F1 at the tennis courts and motorcycles...they are 2 dimensional vs. 3 when in the air.
insane creation ! two things i keep forgetting to ask-why did you remove the vertical fins in the back and in the full size hydro they can change the angle of the front wing with a pedal as they run. any thoughts on making a front wing that can be adjusted with a third channel micro servo?
I don't run the vertical fins because I tend to break off in high speed crashes.. and yes the front winglet could be cut off and made active using a servo and a Giro. Will I ever do that? Only time will tell!
Would love to see this boat again big B
Glad you got it back in the water. She needs a wheelie bar. Lol it will be a challenge to get it dialed in but worth it.
For sure lol. Hopefully it's just the turn fin angle I had, changed the turn fin for the next run out.
This boat is a monster when you bring it out it demands attention 👍😎Just wait til you get it to stay planted👀Gotten over 70mph on mine and still haven’t took it to do an actual speed test.So much fun to drive and watch running on the water,but a little scared running on the River right now with all the debris and crap in the water$$
Big B!,,, I’ve noticed batteries back helps my UL19 ride better also. I recently went back to stock straight turn fin, i couldn’t stand the wide turns. Ended up heating it up & putting bend in it. Definitely better. Mad lizard one great if you want em to really hook. can’t wait to watch this ride, stay after it. I Just ordered the tuning gauge.
2:45 minutes into the video and I can tell that thing has some serious muscle!!! Slow motion is so cool.
Your receiver battery was 6.0v at 7:44 minutes 😂🤣😂 that transmitter is awesome!!! I love it.
The potential here is near limitless, yep it’s guna take some tuning but I’ll be here to see it 👍 thanks for sharing. AWSOME
Thanks Neal, I actually really like the transmitter with the vocal read outs. Once I go to the speed run spot we'll really get to See or should I say hear the GPS read outs in real time.
I've got alot of tuning to do but we'll sort it all out.
Cool pond! Boat tracks sooooo nice.
Thanks again for the info testing etc. I have had my UL 19 a month now done some
e tuning & upgrades also have been in the middle of moving and hopefully will get a chance to put it in the water this week ! Will let you know how she does
Have no experience with this type off hull. But she is a ripper for shure. Just think, like you also said, a challenge to set up... I guess its design wants to make it fly, so it will be difficult to find that sweetspot... Also think it needs very calm water too but we will see, maybe i'm totally wrong. It's the reason why i don't have one, that's for sure. But you are the man to do it big B...!
yeahhh she rips! when you had the battery little bit back... she was gaining some speed! 👌🏾👍🏾
Thanks for naming me as a mentor, I SINCERELY appreciate it. I was thinking smaller prop at first. Temps were a bit up there. It seemed happier with the Oxidean prop. That is FAR too much boat for the park pond now. All those Christmas trees appear inches apart when you're smoking along. I sent you a set of JetStepper plans, just for giggles.
No problem master Yoda! 😆
Yes sir hopefully the wind & weather allows me to run at the river this evening .. Temps were warm bu not hot I switched the cooling.. rudder to the esc & blast to the motor. That should help with Temps.
Watch when you get a min this guy knows his stuff
You turned it into a beast. The setup looks very clean as well 👍I love hydro's. It takes some time to fine tune but dialed in, they fly on the water.
I was looking at the bottom design and I noticed the bottom looks flat at the rear. Maybe by adding small ride pads at the back left and right, you could improve stability. Air will be guided out the back between the ride pads and it might prevent flipping. You could temporarily tape them to the bottom just for testing. Cheers! DJ
Cozy= Boat Jedi Master. Please try this cool idea Big B, then we can do it too.
Cozy RC is one of the best builders around. His ships all look great on the water and are top quality fit and finish.
I'm definitely interested in improving the ride surface thanks for the information cozy rc
Watching this video again & learning from testing my UL19. Seems like the strut trim adjustment is almost the most crucial thing for tuning this boat. I found the less my prop is in water the better it runs. Seems in this video it was lifting more from too down strut causing it to lift?
Son that thing is moving can’t wait to see you get her tuned in BIG B, LOVE THE VIDEOS, BOAT GANG keeping coming
Holly! With your fine tunes it’s gonna be a blast
awesome boat build big b,man that thing is going to move when you get her tunned .have a great day.im fixing to get bundled up and go test my Arrow. I just finished my upgrade. Thanks to your knowledge
Thanks for the support brother
It's starting to cool off here too.
@@IRONCLADRC its 34 today,
HELL YA..on your way ..think your right strut position and turn fin gonna be the key to that monster...another great vid B Awesome job Brother..
That’s a ripper for sure. Lookin good big B.
Salut Iron houaa ton UL19 commence à marcher fort 👍bon certe il n'est pas encore au niveaux de mon UL19 drag boat😜 mais il est déjà très bien pour s'amuser avec tes autres bateaux de courses 😋😜🛴🇨🇵
Man I have a new in the box ul19 hull I was gonna sell but I think I'm gonna build it rail style now with all the reinforced kevlar. Great video too, I can't wait to see more tuning.
Yes sir buddy, put that bad boy to work. Reinforcement with big power is gonna be the ticket. I'm ordering the carbonfiber for mine this weekend.
I put the stock turn fin on hopefully the wind corporates this evening.
@@IRONCLADRC I was thinking about the curved turn fin causing lift no matter what cause it has a horizontal surface. Straight fin us gonna be the ticket for speed runs I think
I think your right. I probably won't run a turn fin when doing speed runs
Its a tough one B. Excited to see what route you go with this one. Im not gonna lie, I wanna hit 100 with mine real bad but I called it quits for the season and just going to enjoy it until it warms up. I hit 70 pretty easy but ran out of options of batts, props and talent lmao. This hull loves and hates speed at the same time.
Personally I think the sponsons need a light blueprint to achieve extremely high speeds like 100 mph?
@@IRONCLADRC Oh yea, its going to take a ton of time and precise tweaks to get even close. Im down for the challenge, but not winter diving for parts lmao.
B, is that wing thing between the sponsons adjustable? Just wondering if that would help keep the bow planted. I guess the real question is why does the bow want to lift up in the first place.
It's the turn fin angle I had. It doest do it with a straight turn fin!
@@IRONCLADRC AH HA! That makes sense! So the angle and the curved shape must have combined to pull that side down causing it to flip.
Yes sir, that's what I'm thinking.
I was thinking the same the real racing hydroplane are adjustable if I’m correct lol
Sweet! That telemetry is awesome bro, You can tell that thing is gonna put up some big digits!!! Lol
Could you stick the skyrc gps to compare accuracy of both next run.
Is the motor cooling line on the turning fin pickup bc if not it needs to be !
Holy Crap that thing moves !!!
Hey b, random blackjack question for you. I watch all your videos. Haven’t seen a 3 blade on the blackjack 42…. The 3 blade by offshore electrics is a popular prop for that boat. Mine runs really well on it. What are your thoughts on that prop for the 42? Thanks
I've run the oxidean 5016 3 blade and loved it, with the stock electronics on 8s I was getting 75-77 mph almost every run.
I still haven't gotten a chance to rip my UL-19. I know you have a lot of dialing in to do but I know you'll figure it out.
Oh man you would absolutely love this boat...
What flex shaft configuration is this? Man that is smooth. Thanks for confirming how I want to set my boats up for turns, not for speed! Ill leave it up to you guys on YT to drag race. H1 scale is my goal.
I'm using a .187 flex 3/16 shaft with no Teflon liner, stock stuffing tube.. 5mm to .187 collet zippkits.com/index.php?main_page=product_info&products_id=384
@@IRONCLADRC Thanks again for all of you help. Please buy that float trainer so I can help you!
Warning: Once you fly, you might get really hooked. Ive raced cars, run boats, run F1 at the tennis courts and motorcycles...they are 2 dimensional vs. 3 when in the air.
insane creation ! two things i keep forgetting to ask-why did you remove the vertical fins in the back and in the full size hydro they can change the angle of the front wing with a pedal as they run. any thoughts on making a front wing that can be adjusted with a third channel micro servo?
I don't run the vertical fins because I tend to break off in high speed crashes.. and yes the front winglet could be cut off and made active using a servo and a Giro. Will I ever do that? Only time will tell!
@@IRONCLADRC you rule bro
She’s a runner 👍❤️
I’ll be at the park pond with my wife Monday afternoon brotha would love to do some runs with ya, always enjoy the videos/content 🤙🏻🤙🏻
Awesome, I'll be there, for sure !
My email is ironcladedout@gmail.com.. email me, let me know what time you'll be there..
@@IRONCLADRC email sent
@@IRONCLADRC 😢 I feel SO left out. Too bad I’m 600 miles away in the wrong Jacksonville.
Is this the Motor in the Dominator or Animal?
Yes the dominator & the oxidigger rigger has the 2000kv oxidean 4082 not sure what motor the animal has...
Damn your driveline sounds smooth as silk B. Does that talking remote drive you nuts sometimes?
Butter smooth 😆 the talking rx/tx doesn't bother me to much I had the volume turned all the way up in this video.
I’d try timing at zero. For a 200a esc, sure looks a lot like the old dynamite 160😆
Hobby wing max 5 oxidean 200 basiclly the same thing
Cool man👍 is it just a rebranded Hobby wing ESC? Thanks
Yes sir that's correct max 5 to be exact
@@IRONCLADRC Ok cool , really looking forward to your Xlx2 Video it’s on my list.
Wow
CRICKEY DUDE ' that's quick
Hopefully I can get another speed run in with her this week. 🙏 weather permitting
you can tell you just bounced off wide open. that thing flys eh! GIVER.
Too bad you cant buy them anymore!!!!!!
I know right, ebay or facebook marketplace may be your best bet