Great tutorial - I found that my wifi router could NOT have any symbols in the password. So I had to change its password on all of my home devices. Haha
Each time I turn off the machine, the wifi settings are gone and I need to connect via COM again. Is there any way to auto-connect to WiFi on startup? Or will I always need to plug the USB prior each usage?
estou tentando usar o MKS na versão 2.1.0 que foi a que veio junto com a minha tts-55 mas eu tento clicar nos botões e nada acontece, até tentei reiniciar o computador e instalar em outro PC e mesmo assim não funciona, onde eu consigo pegar uma versão mais antiga do MKS, porém, funcional?
Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.
The app's problem is that it generates the gcode with M3, so the edges of the recording are burned because it doesn't correct the power in the decrease in speed, which occurs when changing direction. M3 is only suitable for some types of cutting, for engraving it should always be M4.
I configured the laser and connected the wifi network. Dowloaded the mks laser app my Android phone, followed the tutorial and won't connect the laser. Phone and laser the same wifi.
Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.
Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.
Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.
Hi, sir. For all need of technical support must contact through whatsapp +86 177 2282 6689 or email to service@twotrees3d.com, you will be get in touch within 24 hours.
Eu também passei por isso e consegui resolver, se você prestar atenção nos 2 módulos vai ver que tem uma polia dentro de cada um deles que passa aquela correia dentada que fica presa nas réguas, e bingo, volta a funcionar, no manual nao fala nada disso né? e a correia vem fora da polia, a gente que tem de colocar. Passe a correia na polia e depois venha com ela pelo meio entre as duas roldanas e pronto, tá funcionando.
![⭐ฮิตในTikTok!! ( มะมะมะหมูเด้ง MooDeng ) Ver. แดนซ์ ReMix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/4noyAoMa7bQ/mqdefault.jpg)
Great tutorial - I found that my wifi router could NOT have any symbols in the password. So I had to change its password on all of my home devices. Haha
Ipone & ipad are only for engraving, not for cutting?
Each time I turn off the machine, the wifi settings are gone and I need to connect via COM again. Is there any way to auto-connect to WiFi on startup? Or will I always need to plug the USB prior each usage?
The same problem.wi-fi does not save. And I don't know what to do?
Have you tried to refresh to AP mode?
@@well5111 Have you tried to refresh to AP mode?
@@Twotrees3Dofficial What is AP mode? How do I switch to it?
@@Twotrees3Dofficial how can I refresh to AP mode? I haven't seen any related to it in this video or the user manuals...
estou tentando usar o MKS na versão 2.1.0 que foi a que veio junto com a minha tts-55 mas eu tento clicar nos botões e nada acontece, até tentei reiniciar o computador e instalar em outro PC e mesmo assim não funciona, onde eu consigo pegar uma versão mais antiga do MKS, porém, funcional?
Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.
Não sei se conseguiu resolver, mas basta clicar com o botão direito sobre o aplicativo e mandar abrir como ADMINISTRADOR que funciona.
Can you also use it on the computer without a USB connection?
For more information, please click to learn: www.twotrees3dofficial.com/
The app's problem is that it generates the gcode with M3, so the edges of the recording are burned because it doesn't correct the power in the decrease in speed, which occurs when changing direction. M3 is only suitable for some types of cutting, for engraving it should always be M4.
I configured the laser and connected the wifi network. Dowloaded the mks laser app my Android phone, followed the tutorial and won't connect the laser. Phone and laser the same wifi.
Dear, you can reach out to the after-sales engineer for help via the email address service@twotrees3d.com.
@@Twotrees3Dofficial I send a mail thanks.
@@thekassaiba6694 My pleasure.
what is needed for laser t-55 to be fast
Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.
does it work if i plug a tft display on the motherboard?
Hello, here is a video showing how to update a new motherboard. Thanks so much for your comment!
what about if my computer is not window is android
board is not connected.How can I connect? "Aflash read err,1000 etc_main.c 371"
Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.
Can't get connected at all. When trying to connect via laser tool screen opens but nothing is clickable
Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at +86 177 2282 6689 or emailing, service@twotrees3d.com to get a faster reply.
MKSLaserTool_setupV1.0.9 application fails to start
Hi, sir. For all need of technical support must contact through whatsapp +86 177 2282 6689 or email to service@twotrees3d.com, you will be get in touch within 24 hours.
nao pesta nao tem assistencia tecnica em nehun lugar a minha TTS55 nao vai pra traz so vai pro lada
Eu também passei por isso e consegui resolver, se você prestar atenção nos 2 módulos vai ver que tem uma polia dentro de cada um deles que passa aquela correia dentada que fica presa nas réguas, e bingo, volta a funcionar, no manual nao fala nada disso né? e a correia vem fora da polia, a gente que tem de colocar.
Passe a correia na polia e depois venha com ela pelo meio entre as duas roldanas e pronto, tá funcionando.
In Chinese? Really?