I know the build has been done for a LONG TIME now, but seeing you build it just gave me a pretty cool idea that MAYBE you can use in a future build that is similar.... So @ 5:45 we see the 4 bent pipes you just installed.... the way that they come out the back of the bike is PERFECT for them to be used at EXHAUST!! Of course they would be straight pipes so they would be VERY LOUD of course... but it would lessened if you split the single pipe into two, then each of those into two that all four connect to the 4 pipes of the frame... It's a GREAT opportunity to show of your design and welding skills too... With all that room in between the four pipes, you could so some real cool twists and turns, loops and knots, basically anything you can think of!! And if the pipes become quite long, I THINK that would help cut down on the noise of them being straight pipes, BUT I'm not too sure how that would affect the backpressure/compression (I don't really know much about engines, so IDK how this will affect how it runs) .... it just seems like a REALLY COOL place to add some artistic style than I don't think I've EVER seen someone do... and so I figure I would tell you about the idea and you can do whatever you want with it... I honestly don't expect you do anything with this, but at least I tried :D - Oh yea.... GREA WORK btw! This lil beastie is WILD!!!! I LOVE IT!!
WOW!!!!! This lil Beasty is AWESOME!!!! Its SO SIMPLE and it WORKS GREAT!!!! I thought it would have a ton of issues with it having a clutch (or does it??? I couldn't tell if it had a clutch or even a gearbox... I figured you'd have a centrifugal clutch and no gearbox, like on a typical go-kart, but I just couldn't tell) no matter, it works REALLY WELL and looks like TONS OF FUN!!! - - - GREAT JOB!!!!!
Not fun because if you saw well to much easy to lost control and the heat of the engine right between your legs with no protection. Front-wheel brakes and the risk of a head-on rollover
Great Video! It actually was not what I was looking for but I just clicked on it from the suggested videos because the one about to auto play was not even close to what type of content I was looking for. I was actually looking to see if anyone had put a motor kit on one of those recumbent trikes that you sit and pedal in front of you no luck yet ,but even though your video wasn't what I needed I ended up hanging out and watching the whole thing because it was my kind of how to without endless amounts of talking and useless information plus it was sped up where it was obvious what needed to be done just multiple times and it was played at normal speed including showing fit up and checking your dimensions or angles or just overall fit showing it takes a little bump here or tweak there you didn't edit the fir to make you look like a fit up God who just does everything to exact precision and fit with your eyes closed. I also have one question or request or need more info about your custom tube bender. Did you find prints for that somewhere or if you designed it do you sell prints of your setup because I'd love to duplicate that if possible it looks perfect for the small amount of bending I'd like to do and your bender is sweet I have no notes at all so if you could point me in the direction of where you found that or possibly have prints that you would sell I'd very much be interested in getting my hands on them. great vid again and I plan on watching more of your stuff and I subscribed to keep up with your future creations.😎😎😎💯💯💯🦾🦾🦾🔥🔥🔥
Great project and very well done construction. But please be so kind and wear a helmet during test-drive. Just because the community want to see more projects of you...😅😅
Awesome build! Gonna give it a go myself. Do you have a list of parts or sites that you ordered from? Also, what did you use for pipe? OD, wall thickness, length of pipe? Can’t wait to see where this goes lol
Pipe is 35mm with 2mm wall. It's plenty strong. I bought most parts second hand. drift sleeves, gas tank and seat I ordered from aliexpress. Good luck👍
Ola, falo do Brasil, eu tenho uma dúvida para um com dois lugares voce me recomenda o motor na traseira ou em baixo do quadro. Aonde daria melhor dirigibilidade. Obrigado
Thanks for watching! What do you like most, electric builds or gasoline powered builds? Let me know in the comments below😉
When are you going to do another video about this trike?
AWESOME!
I'm building a trike and this helps me a bunch, Thanks!
Both for sure!!
Both for sure!!
I know the build has been done for a LONG TIME now, but seeing you build it just gave me a pretty cool idea that MAYBE you can use in a future build that is similar.... So @ 5:45 we see the 4 bent pipes you just installed.... the way that they come out the back of the bike is PERFECT for them to be used at EXHAUST!! Of course they would be straight pipes so they would be VERY LOUD of course... but it would lessened if you split the single pipe into two, then each of those into two that all four connect to the 4 pipes of the frame... It's a GREAT opportunity to show of your design and welding skills too... With all that room in between the four pipes, you could so some real cool twists and turns, loops and knots, basically anything you can think of!! And if the pipes become quite long, I THINK that would help cut down on the noise of them being straight pipes, BUT I'm not too sure how that would affect the backpressure/compression (I don't really know much about engines, so IDK how this will affect how it runs) .... it just seems like a REALLY COOL place to add some artistic style than I don't think I've EVER seen someone do... and so I figure I would tell you about the idea and you can do whatever you want with it... I honestly don't expect you do anything with this, but at least I tried :D
- Oh yea.... GREA WORK btw! This lil beastie is WILD!!!! I LOVE IT!!
That frame would survive a drop from the Space Station! Amazing build.
WOW!!!!! This lil Beasty is AWESOME!!!! Its SO SIMPLE and it WORKS GREAT!!!! I thought it would have a ton of issues with it having a clutch (or does it??? I couldn't tell if it had a clutch or even a gearbox... I figured you'd have a centrifugal clutch and no gearbox, like on a typical go-kart, but I just couldn't tell) no matter, it works REALLY WELL and looks like TONS OF FUN!!!
- - - GREAT JOB!!!!!
That sucker sounds so cool! Amazing building skills, I want one now lmao
Very good work . Gorgeous drift trike 👍👏
Cool that we can hear you laughing while testdriving it 😄
Wow hebat sekali kamu sodaraku.. Pinter banget.. Sehat terus sodaraku ya.. 🙏🙏🙏🙏👍
That thing is awesome and its fun to drive...
Not fun because if you saw well to much easy to lost control and the heat of the engine right between your legs with no protection. Front-wheel brakes and the risk of a head-on rollover
Caracas com uma solda dessa eu construiria um assim tsmbem muito lindo parabens😊😊😊😊❤❤❤
Show parabéns pelo trabalho top
Love your creations! Next will be buggy perhaps. 😊 great inventions..❤❤❤
And again a new cool project 👌💪💪💪
Great Video! It actually was not what I was looking for but I just clicked on it from the suggested videos because the one about to auto play was not even close to what type of content I was looking for. I was actually looking to see if anyone had put a motor kit on one of those recumbent trikes that you sit and pedal in front of you no luck yet ,but even though your video wasn't what I needed I ended up hanging out and watching the whole thing because it was my kind of how to without endless amounts of talking and useless information plus it was sped up where it was obvious what needed to be done just multiple times and it was played at normal speed including showing fit up and checking your dimensions or angles or just overall fit showing it takes a little bump here or tweak there you didn't edit the fir to make you look like a fit up God who just does everything to exact precision and fit with your eyes closed. I also have one question or request or need more info about your custom tube bender. Did you find prints for that somewhere or if you designed it do you sell prints of your setup because I'd love to duplicate that if possible it looks perfect for the small amount of bending I'd like to do and your bender is sweet I have no notes at all so if you could point me in the direction of where you found that or possibly have prints that you would sell I'd very much be interested in getting my hands on them. great vid again and I plan on watching more of your stuff and I subscribed to keep up with your future creations.😎😎😎💯💯💯🦾🦾🦾🔥🔥🔥
Thanks for your support. I have no plans, I just build as I go.
Very intelligent and a first-class teacher.Thanks.For your efforts.
💯💯💯💥💥💥👍👍👍🌹🌹🥀🥀🌻🌻🌷🌷🪴🪴
Awesome, lol now ya gotta do the E-version!
Thanks for the video
Hermoso juguete..quiero uno
wow the best brothers hahaha...niceee
Kids of the 70's, remember the green machine?
Great project and very well done construction. But please be so kind and wear a helmet during test-drive. Just because the community want to see more projects of you...😅😅
awesome trike but your gear ratio is too slow, I would recomend you to put a 25 thooth sprocket and a 19 thooth front sprocket.
Parabéns pela iniciativa. Por propósito, você vende esses projetos?? TAKE MY MONEY.
I honestly think that you should add a big motorcycle engine that way you can go a lot faster
Cool stuff!
Great video, What size tubing is the frame made of.
It's 35mm with 2mm wall. Thanks for watching👍
DANG that is one tiny tank for the fuel!!!! But I guess you aren't taking this on cross country journeys LMAO
Awesome build! Gonna give it a go myself. Do you have a list of parts or sites that you ordered from? Also, what did you use for pipe? OD, wall thickness, length of pipe? Can’t wait to see where this goes lol
Pipe is 35mm with 2mm wall. It's plenty strong. I bought most parts second hand. drift sleeves, gas tank and seat I ordered from aliexpress. Good luck👍
is that beetle slammed on porsche rims?
Yes it is😏. I posted a video on it a few months ago, check it out!
Parabéns hein
Legal 💚 💛
Ola, falo do Brasil, eu tenho uma dúvida para um com dois lugares voce me recomenda o motor na traseira ou em baixo do quadro.
Aonde daria melhor dirigibilidade.
Obrigado
needs slightly larger wheels in back ... Like a mans Big wheel though! nice!
Mantap bang
Mesin apa tu ngab
A. Maziing...!! 👍👍
ok, please reply where you sourced the axle and engine? very, very cool....best I've seen yet !!
Engine is from a chinese atv and the axle is from a kart. Bought them locally second hand
How dwas that frame alined?
帅气🐮
Ficou demais
machtig Hen !
🚩🚩🚩
do you sell these frames. please let me know
It is for sale?
Acho que o Leandro Torneiro vai construir algo parecido
What's the motor from
Exact measurements of rumigi please
How long does your PVC last?
Not so long, in the meantime 1 already exploded😏. But I think if you drive it on a smoother surface they will last a lot longer
a skid plate between
The engine and seat would be
Proper use
do you sell the bluepints for the chassi?
I don't have any, I build as I go😏
I’m going to follow your steps then and see how it goes!😂 i want to build one in colombia
If you need blueprints on something as simple as this you probably should leave building the frame to a qualified fabricator!
@hennybutabi what tyre size did you use for this build ?
Can you please answer and tell me the size?
Hello, I don't have plans but i can say it's 100cm wide and wheelbase is 120cm
Thanks
What size tubing did you use for the frame? Thank you
how much?
✌✌✌✌✌✌
👏
please upload more videos
So a cor que ê horrivel😂😂😂😂❤❤❤