Great video, Thanks Sean! I just received my Pista GP today and installed my Sena 30k. You should get a commission from AGV. This video was a deciding factor in my purchase. There are a couple of things I discovered while performing this install. It doesn’t look like it, but you can put the speaker between the foam that you show at 3:40 and the thin hard plastic material above it. There are actually little circles that are pre cut (I just shipped them out with a long pair of scissors) that will let the sound through the foam and it cushions the speakers from your ears. It is also very easy to put the Velcro onto the inside of that plastic. Just line middle of the Velcro up with the hole in the foam and your speakers should be in a pretty good spot.
well, these are supposed to be race replicas and a lot of the GP tech comes from F1, so it kind of makes sense they would have ear pockets. plus, i wouldn't be surpised if these cheek pads are used in multiple AGV models. the funny thing is i JUST watched the un-named review... and almost went looking for a different helmet because of this issue. glad i did a little more research first. glad i found this.
duuuudeeeee, i ride my corsa for 2 years now without using any comm system just because i thought none will fit these helmets. now I know. just ordered 20s for my corsa. thanks for the clip
Sean... you’re the fucken man, hands down best video on TH-cam, I’ve been trying to ram the headphones behind the padding all this time 🤦🏼♂️ cheers man!
Works perfect on my new Pista GP helmet, I just need to work on the speaker position as my ears were killing me making me think if I can't adjust it right that I will order the slim speakers instead. I will try pushing it all the way to the back next time. I think once the new helmet breaks in more it will loosen it up as well as the pads are still stuck to my cheeks!
I had no problem installing Sena. But I’m thinking about taking it off. I can’t hear anything from comms going 50+ mph and the noise is definitely on a hazardous level.. I could hear a little bit when using ear buds connected to Sena aux. But the mic is absolutely useless at any speed... It’s time to give up. It really is a race helmet. If you’re only using it for music, which you can at some speeds, a earbud to your phone or pair of compact Bluetooth earbuds is better choice.
just installed on GP R yesterday, it's actually easier than it was on Pista GP. although the ear pockets aren't as well defined or as accessible as it was on the old Pista.
Mr. Alpina got my corsa r today and checked to see if the cheekpads do have the same openings, turns out they don‘t. The whole neckroll looks different, pretty much the same as the veloce s rather than the pista. The only real difference however is that the corsa doesn‘t have the cutouts for the speakers as the veloce does, they are otherwise pretty much the same, neckroll and eps foam wise. I was able to install my sena on the veloce s, so if you remove the foam from the sena speakers and use the thin foam lining that comes with the corsa thats supposed to hide the eps foam (pretty sure thats what its for anyway) you may be able to get away with it and not have it be uncomfortable. I‘m gonna try to install it soon and can report back if you want
Without a doubt, the best "how to" video I have used on TH-cam!!! Thanks a million.
Great video, Thanks Sean! I just received my Pista GP today and installed my Sena 30k. You should get a commission from AGV. This video was a deciding factor in my purchase.
There are a couple of things I discovered while performing this install. It doesn’t look like it, but you can put the speaker between the foam that you show at 3:40 and the thin hard plastic material above it. There are actually little circles that are pre cut (I just shipped them out with a long pair of scissors) that will let the sound through the foam and it cushions the speakers from your ears. It is also very easy to put the Velcro onto the inside of that plastic. Just line middle of the Velcro up with the hole in the foam and your speakers should be in a pretty good spot.
is the sound muffled? i've tried but the sound not so loud anymore
well, these are supposed to be race replicas and a lot of the GP tech comes from F1, so it kind of makes sense they would have ear pockets. plus, i wouldn't be surpised if these cheek pads are used in multiple AGV models. the funny thing is i JUST watched the un-named review... and almost went looking for a different helmet because of this issue. glad i did a little more research first. glad i found this.
i'm going to put a GoPro on it too and send them a pic....
I have two Pista GP and none has the pockets for speakers :(
Great video - I've been avoiding moving my Sena from my T-2 to my Corsa because "everyone" else said it wouldn't work.
duuuudeeeee, i ride my corsa for 2 years now without using any comm system just because i thought none will fit these helmets. now I know. just ordered 20s for my corsa. thanks for the clip
Just wanna say the newer pista gp rr helmet, the padding doesn't have the space anymore, it is stitched up
Sean... you’re the fucken man, hands down best video on TH-cam, I’ve been trying to ram the headphones behind the padding all this time 🤦🏼♂️ cheers man!
great video. now I'm not hesitant to buy an AGV Pista/Corsa Helmet. My fault for listening to a guy with a faux hawk! Thanks.
Said Faux Hawk guy is just Jel. I picked one up off the back of this video. Thanks bro 🙏
I had the sena on my old agv k 5 hurricane but I was confuis to put this und my pista and than you hat this video and it helps a lot
Thank you this was very helpful I have the same model. Do you think the 10s or smh10r will fit the same?
So you only put the speakers on the pads ? Why you need the sticker for ? Did you attach it inside of the pads ? Thanks
Works perfect on my new Pista GP helmet, I just need to work on the speaker position as my ears were killing me making me think if I can't adjust it right that I will order the slim speakers instead. I will try pushing it all the way to the back next time. I think once the new helmet breaks in more it will loosen it up as well as the pads are still stuck to my cheeks!
same with me,, hurt like hell in my upper cheeks when i'm put on/off the helmet..
does this also work with the sena 30k?
Where did all your videos go?
I had no problem installing Sena. But I’m thinking about taking it off. I can’t hear anything from comms going 50+ mph and the noise is definitely on a hazardous level.. I could hear a little bit when using ear buds connected to Sena aux. But the mic is absolutely useless at any speed...
It’s time to give up. It really is a race helmet. If you’re only using it for music, which you can at some speeds, a earbud to your phone or pair of compact Bluetooth earbuds is better choice.
do you think the other mic will work with the pista gp r carbon?
I did mine like that too, but is extremely uncomfortable.
My pita r has pockets, I installed the same 30k yesterday
Milan Pintar how’s the noise level?
hey, Sean. You think this would work on the new Pista GP R?
Sean Havok, thank you so much for the reply! that helps!
just installed on GP R yesterday, it's actually easier than it was on Pista GP. although the ear pockets aren't as well defined or as accessible as it was on the old Pista.
That helps me A Lott thank you 🦊❤️
any problems with pairing???
I imagine this would be extremely uncomfortable, since the speakers will be jammed into your ears
good install video....making sure i did it right..
Hey thank you very much!!!!
Does anyone know if this works on the Corsa R?
can this be done on a agv corsa r aswell?
Anyone?
Mr. Alpina got my corsa r today and checked to see if the cheekpads do have the same openings, turns out they don‘t. The whole neckroll looks different, pretty much the same as the veloce s rather than the pista. The only real difference however is that the corsa doesn‘t have the cutouts for the speakers as the veloce does, they are otherwise pretty much the same, neckroll and eps foam wise. I was able to install my sena on the veloce s, so if you remove the foam from the sena speakers and use the thin foam lining that comes with the corsa thats supposed to hide the eps foam (pretty sure thats what its for anyway) you may be able to get away with it and not have it be uncomfortable. I‘m gonna try to install it soon and can report back if you want
Hey, thanks for your reply! :) I have decided on the Pista GP R, just waiting for AGV to get on with the production in march :s