Yes, like u tweak select knob on your pedal after u set the efx before, when u back to the pedal u set the value will not change, but make sure u save the preset
Very helpful tutorial bro. Halimbawa ginamit mo siya to turn on/off yung distortion, smooth be yung transition? Problema ko kase kaya ako bibili ng controller na 'to eh dahil sa latency ng paglilipat from one preset to another. Para kaseng may stutter siya pag nag-engage na yung nilipatang preset. Looking forward to hearing from you bro. TIA!
sir,kabibili kolang po ng akin. may way kaya para ma panatili nya yung value ng tube screamer kapag na turn off gamit ang chocolate? or mas okay nalang na gumawa ng presets example: 1A: clean 1B: clean + delay 1C: clean + tubescream 1D: clean + tubescream + delay para for example kagagaling ng with tube screamer at need i off press nalang yung 1A?
sa akin kasi sir nagreretain yung value ng tube screamer pero dapat ang active preset mo sa mg300 is yung may tubescreamer. pero pwede din yan sir na gumawa ng sarili preset
@@emoholicarl i'm currently using the m-vave MS1 midi receiver. according to other users, you really need the midi receiver in order for it to work. though I haven't tried using a usb cable from the nux to the mvave chocolate since I don't have a usb-c to micro usb cable
technically gagana siya pero might not work as intended. if for example yung configuration mo for 1 switch is para sa EFX na Tubescreamer then nagchange ka ng patch na Distortion yung gamit na EFX, then pagpindot mo ng footswitch babalik siya sa Tubescreamer with the default parameters(naka 12 o'clock lahat).
searching for this in all the internet and you say to in half video, thanks!
Thank you for this tutorial. Sir paano naman pag tone bridge app ang gamit?
This blow my mind, very good info, thank you so much!!
Great video! Thank you! Do you know if the values are the same for the MG-30 and if not, do you know where could I get them ?
Does it remember the way you had the Tube Screamer set when it turns on and off? Like… will it recall the way the tone, level, and gain are set?
Yes, like u tweak select knob on your pedal after u set the efx before, when u back to the pedal u set the value will not change, but make sure u save the preset
How to config the footswitch using cable data direct to mg 300?
Very helpful tutorial bro. Halimbawa ginamit mo siya to turn on/off yung distortion, smooth be yung transition? Problema ko kase kaya ako bibili ng controller na 'to eh dahil sa latency ng paglilipat from one preset to another. Para kaseng may stutter siya pag nag-engage na yung nilipatang preset. Looking forward to hearing from you bro. TIA!
micro usb pa kase ang mg300. expected yung delay nyan sir
It's not working please help me
How do you preset the bank up / down combined switches ( E and F ) ?
Hello there bro, i was wondering, can i use 2 or more effects at the same time with midi footswitch?
Tap Tempo data?
Won't work on my Nux mg30. I want only to work as preset changing not stomp box mode
i think it's a different setting for the mg30
Sir gagana pa rin po ba ito kahit hindi nakaconnect si nux sa laptop?
Hey bro awesome video! Is it possible to connect 2 midis having different functions to 1 mg300?
I haven't tried that one sorry. But according to what I read, it seems possible
Neural DSP tutorial pleaseee
i have a different tutorial for Neural DSP (the video before this) but only for preset change
@@Albertsamait's still for nux tho?
@@bcan sorry it was a youtube shorts but it wasn't a tutorial. i just followed this guide for neural dsp th-cam.com/video/MSmh7d24Aoc/w-d-xo.html
@@Albertsama thanks so much
It work on nux mg 400?
Thank you!
sir,kabibili kolang po ng akin.
may way kaya para ma panatili nya yung value ng tube screamer kapag na turn off gamit ang chocolate?
or mas okay nalang na gumawa ng presets example:
1A: clean
1B: clean + delay
1C: clean + tubescream
1D: clean + tubescream + delay
para for example kagagaling ng with tube screamer at need i off press nalang yung 1A?
sa akin kasi sir nagreretain yung value ng tube screamer pero dapat ang active preset mo sa mg300 is yung may tubescreamer. pero pwede din yan sir na gumawa ng sarili preset
i'm using melo midi commander, is it useful for nux mg 300?
sorry haven't tried it yet
I have a question, should all the presets be programmed or is it only with one?
it only works on 1 preset.
@@Albertsamaso you can't programm other presets? Or you meant that one should program midi each preset?
Woahh!! how do you use this to switch presets in the neural dsp tho. It would be awesome if you could make a video on that
is it necessary that the mvave is connected to the computer or ipad or only to the nux?
Cheers
you only need to connect it to pc or ipad to configure the foot switch but after that you just need to connect it with the nux mg300
@@Albertsama does it still need the bluetooth USB as the receiver? what is the host that you used here?
@@emoholicarl i'm currently using the m-vave MS1 midi receiver. according to other users, you really need the midi receiver in order for it to work. though I haven't tried using a usb cable from the nux to the mvave chocolate since I don't have a usb-c to micro usb cable
Sir pano po pag nag change ako nag patch d na gagana?
technically gagana siya pero might not work as intended. if for example yung configuration mo for 1 switch is para sa EFX na Tubescreamer then nagchange ka ng patch na Distortion yung gamit na EFX, then pagpindot mo ng footswitch babalik siya sa Tubescreamer with the default parameters(naka 12 o'clock lahat).
I see bali limited lng sya isang patch
yup
Did you experience latency in terms of sound pag nag tturn on/off ka ng effects block?
can you make a deisgnated switch for tap tempo for mg 300?
the only thing that I tried is use the foot switch to set to a specific tempo. i'll try to check if it can be used as a tap tempo
Up for this tap tempo
@@Albertsama up for this tap tempo
Is there a stomp box mode?
i don't think so. this is the work around that I did to have something similar to stompbox mode
@@Albertsama i mean stomp box mode is individual effects mode.
@@Albertsama i tried on my Nux mg30 and it won't work
Sir gagana din po ba to sa Nux MG 30?
haven't tried yet since I don't have an MG30.