Initial thoughts on the Revo Ness- I am a Nessmuk fan, so I stopped this video at 2 minutes in and ordered this one. I find the unusual handle to be very ergonomic for grips such as forward edge out, reverse edge out, pinch, and saber. Due to the angled handle some other grips won’t work as well. Some say the detent is too firm, but my example deploys easily. I did immediately add one “jimp” to the flipper tab, which was not absolutely necessary but helps a bit. I also added some jimping just forward of the handle since I frequently use a saber grip. THANK YOU Revo for the reversible clip, it got switched as soon as I removed it from the box. The factory edge was paper cutting sharp. I gave it a few swipes on a ceramic rod and a few more on a strop and it will now shave a tick’s cheek. The tick was uncooperative though and may not have survived the testing phase. I would like the liner lock to engage a little more of the blade, but maybe a bit of use will take care of that. It covers enough that I dont think it will close accidentally. I am used to mostly Tri Ad locks, so that is what I always (unfairly) compare to, haha. I see that the liners on this model are skeletonized, thankfully, unlike the original. Weight of the non-KC exclusive is listed at 4.96oz. Mine measures at 4.1oz. Without using yet, I would give my sample just slightly shy of 5 stars.
my thoughts exactly brother. I've been wanting a new traditional since I really only have one thats actually worth a damn, and I'm pretty sure thats gonna be it.
Just got my REVO Ness in Copper, and I love it. It’s well put together with SS liners, liner lock and big, broad Nessmuck D2 blade. That blade by the way, with its big, flat grind, is very slicey. It’s perfect for slicing tomatoes and spreading peanut butter (and most anything else)! The flipper action is very good, and the clip is my kind of clip, smallish for the knife, low but with a perfect upturn at the end, and BOTH inset into the scale and with flathead, countersunk screws! Not even WE does that! It is even very effectively deep-carry, leaving almost nothing showing above the pocket. Amazing! All for $87.50. I recieved 2 other knives today, which cost $200 and $350 each, and I don’t know why I bother. One of them is defective, in the pivot, and the other is fine, but not very snappy. The Ness is better! I’ve already put the others away, one prior to returning it. I will keep the Ness with me.
Hi DCA, love the new Buck offerings also could you do a long term knife storage video? For those of us (Me) who don't know how to properly store a larger number of knife. Thank you and keep up the amazing job.
That Gerber Downwind would definitely peak my interest if it they made it in 14C28N with a full tang. That steel is amazing for the low-mid budget category and is durable to the the point of being equally or more durable than most carbon steel blades. Gerber, wake up!
@@NefariousTribe sadly, that's been my experience with Gerber too. They have a few custom shop knives that are impressive, but only sold through their own website and cost more than they should. So they've been a hard pass as well. They just haven't figured out that happy medium yet.
I saw my favourite description of James Brand commented on a recent MetalComplex video. "James Brand are gas station knives for people who shop at Wholefoods."
I don't know if it's the booty QC or that they can't even bother to spring for 14c or the ridiculous prices they ask for their subpar knives, but I can't help laughing every time I see a new James Brand knife.
@@_MiMo_ Exactly. It came up in a recent MC video, but the part that upsets me is that they're kinda taking advantage of folks that are new to the knife world. There's plenty to criticize Spyderco for (although I'm also a big fan), but they deliver a pretty consistent product with decent QC. James is all over the place with everything.
Is there any recommendations for something like the Ellis but with a straight edge? I've been looking for ages. The Ellis is the closest so far to what I'm looking for
I think it counts as a multi tool because the prybar can probably pry open a bottle cap if you leverage it with your thumb like folks do with a lighter.
Got my first big boy knife in the Osborne 940-2, have any suggestions for a button auto knife (Preferably made in the USA) Also I've been looking into some bushcraft/camp knives, what are your thoughts on some of the Benchmade offerings?
i've been really considering the new buck squire until dca showed the saunter. been looking at slip joints and something with better steel. what a choice now. lol
Anybody have anymore insight into who is making the USA made Schrades or if they are any good? Havent had too much confidence in the brand judging by what they usually offer, but I'll be looking to see how they do offering USA made models now.
I'd like to know this too. Just bought the little trapper in their new USA made line. It's well done. Though I think it's a bit pricey compared to a case alternative
I found your channel a couple weeks ago and really enjoy it.Also can you recommend a quality rescue type folder under a $100? I'm in LEO field ,thanks.
I really like that Schrade Bruin. It’s nice sized. I bet that’ll fit in my leggings pockets so easily. Probably call it an overmold and not a wrap for the Gerber? See it in power tools. It’s called TPE. Thermoplastic elastomer.
Flipping is the word you were seeking. Maybe a segment on practice flippers in the future ? It’s a cool art form and fun way to improve dexterity,imo.Some of the “flippers” out there have amazing skill. You guys should check it out. Thanks again for an informative video.
DCA brings up a great gripe I frequently have of unlisted steel types. With companies like Wusthof it drives me crazy. I'd love to buy a few but what is in it! Searched everywhere with no answers
Wusthof's steel isn't a secret -- though it is proprietary to them. Lots of the big kitchen knife makers use proprietory steels -- what's the Shun one? VG10 Max. Anyway, Wusthof prints the formula on each blade. It's X50CRMOV15
Hmmm... Hey Mr. Anderson, please would you comment on the "other" show about knife brands that produce both "budget" and "premium" knives? Not different lines lie Civivi/WE or CJRB/Artisan/Ferrum Forge, but like CRKT, Kershaw, and now Schrade and Buck. Someone mentioned to me that certain shoe companies do the same, and do I think the shoes we can buy are the same as sponsored elite athletes? No, no I don't. However when we're talking steel and plastic and huge price differences I wonder how much "puffing of wares" is happening? Thanks, love your and Thomas' show. Cheers from Sandy Eggo.
Love your channel,nice nessmuk have lost interest in Spydercos too many exclusives I cant get my hands on ,just too much of a hassle -Civivi,CJRB ,WE my new favorites
There must be a huge profit margin in making knives or there would not be so many . I mean there’s a ton of them . How does Schrade keep their prices so low , gerber also ?
I actually really like that Kommer CRKT. I'd pay 12 bucks more for G10, but rubber works great and is just fine for the price. I do like that last Gerber fixed blade design (I really don't need full tang for a small belt knife if its made well) but of course, they used 7cr steel, which from what I can tell is about the worst version of that already low performance steel. I don't know why, but Gerber just does not do a good job with that stuff, and I've heard it compared to 420J2 or 4034 run soft. Until they step up their game, I simply won't give Gerber my business. If they show that they give a damn, maybe ill change my tune, but this knife does not help their cause. Such a waste of what could have been a really nice budget option with a decently heat treated 8cr or 12c27
I just got a lg feldspar. There’s so many good knives out there , pick one on sale like a few years ago model won’t be as expensive . I see some of the prices like $300 $500 and I guess if people buy them it makes them happy but a knife is a knife like a gun is a gun . Subtle differences in quality and longevetity and craftsmanship dictates the price and I m tired of hearing “ budget” model because that would describe most of the nice things I have 😊 and I don’t consider any of them budget . I ll always take good value for money when making buying decisions . It’s stupid not to or yer rich . You pull out a knife and show the average person they could care less . They care if it works and is it sharp enough
I wonder how easy it would be to find new rods for that fire starter in 5 years? By the time most of us would need it, they would be impossible to find. Even Benchmade, or the actual manufacturer will probably have stopped making them by then! Anyway, apart from the rod, there is not much there. Might as well start from scratch anyway.
DCA, you never gripped the Olamics or talked about how they feel in the hand. Was this just a miss on your part, or did you skip it because you don’t like the fit and didn’t want to have to make a negative comment?
You can still open a bottle with the James Brand pride tip if you got some skills. You just put it under the And you use your hand under it for leverage just like you would with a lighter. For someone like me that’s been opening beers with a lighter for years it’s actually easier than opening out and on board bottle opener. 😜
Please CRKT stop using 8cr13 there are so many of your designs I would love to buy if you just upgraded the steel! I mean I've still bought multiple of the minimalist because it is only like 25 bucks but I'd happily spend 60ish for a better steel!!!
I finally gave up and got myself a spyderco, and I don't get why they're so popular. I have a couple of civivi and a cjrb that I like way better. Maybe it's the size of my hand or just my taste, but yeah, not impressed.
I’m wondering which Spyderco knife you got. With the number of different models they have, it's hard to dismiss every knife after handling just one. I’ve handles some Spydercos that I hate and have some that I love. If you are open to some advice, go and handle more models before you dismiss the brand.
Only $375:😂. I bought a custom from Pakistan that is real custom and was $30 and it’s beautiful . If I said it was $350 people would say it looks like it . Solid and heavy too , well done pakistanian shop
THIS CERTIFICATES DMA THE HIGHEST LEVEL GRAND MASTER OF STEEL... PLS. REFER TO movie CONAN THE BARB. (A.S) HIS DAD SAYS TELLS THE SECRET. GIVE THIS MAN A RAISE!!
Initial thoughts on the Revo Ness- I am a Nessmuk fan, so I stopped this video at 2 minutes in and ordered this one. I find the unusual handle to be very ergonomic for grips such as forward edge out, reverse edge out, pinch, and saber. Due to the angled handle some other grips won’t work as well. Some say the detent is too firm, but my example deploys easily. I did immediately add one “jimp” to the flipper tab, which was not absolutely necessary but helps a bit. I also added some jimping just forward of the handle since I frequently use a saber grip. THANK YOU Revo for the reversible clip, it got switched as soon as I removed it from the box. The factory edge was paper cutting sharp. I gave it a few swipes on a ceramic rod and a few more on a strop and it will now shave a tick’s cheek. The tick was uncooperative though and may not have survived the testing phase. I would like the liner lock to engage a little more of the blade, but maybe a bit of use will take care of that. It covers enough that I dont think it will close accidentally. I am used to mostly Tri Ad locks, so that is what I always (unfairly) compare to, haha. I see that the liners on this model are skeletonized, thankfully, unlike the original. Weight of the non-KC exclusive is listed at 4.96oz. Mine measures at 4.1oz. Without using yet, I would give my sample just slightly shy of 5 stars.
I don't know anything about REVO, but I love the idea of a folding Nessmuk.
I don't buy many traditional slip joints but those corncob edition Case knives are gorgeous
my thoughts exactly brother. I've been wanting a new traditional since I really only have one thats actually worth a damn, and I'm pretty sure thats gonna be it.
The steel is listed by Gerber as 7cr on the downwind. For a folder, eh, but for a field knife, easy to maintain in the bush.
We need an improved nessmuk search on the site. It only shows 13 knives, but I know there are more options, including one from TOPS.
In honor of Thomas, we need a cheese knife review.
That sir, is a GREAT IDEA!
LOL! Queso cuchillo show!
I’m looking for a cheese knife and didn’t know it.
Just got my REVO Ness in Copper, and I love it. It’s well put together with SS liners, liner lock and big, broad Nessmuck D2 blade. That blade by the way, with its big, flat grind, is very slicey. It’s perfect for slicing tomatoes and spreading peanut butter (and most anything else)! The flipper action is very good, and the clip is my kind of clip, smallish for the knife, low but with a perfect upturn at the end, and BOTH inset into the scale and with flathead, countersunk screws! Not even WE does that! It is even very effectively deep-carry, leaving almost nothing showing above the pocket. Amazing! All for $87.50. I recieved 2 other knives today, which cost $200 and $350 each, and I don’t know why I bother. One of them is defective, in the pivot, and the other is fine, but not very snappy. The Ness is better! I’ve already put the others away, one prior to returning it. I will keep the Ness with me.
Gotta love some DCA in the afternoon!
Does he ever reply?
with the pry bar you can open bottles
Looking to try some nessmuk type knives. The folder looks like a decent place to start. 🤔
Very nice that Schrade Old Timer.
The bruin is nice.. I've the 1095 on a slip joint
Damn that first knife I thought it was a fixed blade. I'm getting one. I'm sold
Always love your vids DCA! You da man!!!
Revo ness
Just got the CRKT Catchall and really love the blade shape and overall design!
The Viperi FANG has probably the coolest deployment method I have seen. Still in development, but so excited to see it done and buy one.
The Gerber caught my eye. Great segment DCA. Cowabunga.!
Man...that rainmaker though...awesome video!
Hi DCA, love the new Buck offerings also could you do a long term knife storage video? For those of us (Me) who don't know how to properly store a larger number of knife. Thank you and keep up the amazing job.
Gerstner chests are what most people use but I couldn't afford one so I just bought a huge jewelry box and a few silicate packets.
Awesome thanks 😊
When are we going to be able to preorder the Tops Woodcraft?
I just ordered one of those pakkawood delicas. Dangggg they look good!
Hope u enjoy it :)
Save your money to get water, food and medicine supplies.
Well, I had to pull the trigger on a REVO Ness. 👍
Deff getting that blue case. Looks awesome
DCA is so good at his job!
Some beautiful knives...l had to pause and check out a catalog a couple of times!
That Gerber Downwind would definitely peak my interest if it they made it in 14C28N with a full tang.
That steel is amazing for the low-mid budget category and is durable to the the point of being equally or more durable than most carbon steel blades.
Gerber, wake up!
I agree, a mid grade steel and full tang and that is a buy.
Mystery steel and a stick tang? Pass unfortunately.
@@NefariousTribe sadly, that's been my experience with Gerber too. They have a few custom shop knives that are impressive, but only sold through their own website and cost more than they should. So they've been a hard pass as well.
They just haven't figured out that happy medium yet.
So it's 7cr steel according to the Gerber site.
I won't buy from Gerber anymore. The original made in US ones are nice though.
@@NefariousTribe 😱 That should be criminal to use that steel.
Does that make me a knife snob? 🤔
I saw my favourite description of James Brand commented on a recent MetalComplex video. "James Brand are gas station knives for people who shop at Wholefoods."
While I disagree, that is pretty dang funny! -DCA
I'm waiting in anticipation for some of the Artisan/CJRB releases. The Ahab, Ruffian and those Joe Flowers collaborations look fantastic
That Ahab looks slicealicious!
Do they make that Revo Ness in a fixed blade?
I don't know if it's the booty QC or that they can't even bother to spring for 14c or the ridiculous prices they ask for their subpar knives, but I can't help laughing every time I see a new James Brand knife.
Same.
At what point does James Brand just stop making knives?
@@dingusdog8687 When people stop buying them. So never. People are still buying Spydercos, me included, despite slightly larger then average prices.😉
@@_MiMo_ Exactly. It came up in a recent MC video, but the part that upsets me is that they're kinda taking advantage of folks that are new to the knife world. There's plenty to criticize Spyderco for (although I'm also a big fan), but they deliver a pretty consistent product with decent QC. James is all over the place with everything.
Imo, nothing this week that makes me want to place an order. I'm not complaining, I will save up for next week!
THANK YOU 🌲🌲🌲
Any idea if light duty locktite would react with the firesteel?
Yes
@@Xander_Park yes good or yes bad? =P
Can you review any Toor knives ?
I really want pocket fixed blades and modern traditionals to become more popular and more produced.
Not popular for a reason. They aren’t easy to carry or locked blades are safer.
@@talisikid1618 :’(
would luv to see a usa made shrade ot landshark, the easy open sheepsfoot.
Need more of them nordsmith joints
Those
Love Spyderco, but man their prices are whack. If and when they ever come back down to the realm of normal, I'll be happy to buy them again!
Agreed, their prices are ridiculously high.
Faux pocket clip situation,
Love 'em
Is there any recommendations for something like the Ellis but with a straight edge? I've been looking for ages. The Ellis is the closest so far to what I'm looking for
When you say a straight edge, do you mean a sheepsfoot or Wharncliffe shape, or just something without serrations? -DCA
Been eyeballing the Stroup blades for awhile!
I think it counts as a multi tool because the prybar can probably pry open a bottle cap if you leverage it with your thumb like folks do with a lighter.
Got my first big boy knife in the Osborne 940-2, have any suggestions for a button auto knife (Preferably made in the USA) Also I've been looking into some bushcraft/camp knives, what are your thoughts on some of the Benchmade offerings?
If you know how to open a bottle with a BIC lighter then you will have no problem opening one with the pry bar on the James Brand Ellis.
Again thumbs up 👍
The Gerber Downwind for 39bux is ok by me.
Hmph...liking that Schrade Bruin - 1095 steel, could possibly be out of Titusville PA...maybe the Farm and Field facilities/makers of GEC.
i've been really considering the new buck squire until dca showed the saunter. been looking at slip joints and something with better steel.
what a choice now. lol
Anybody have anymore insight into who is making the USA made Schrades or if they are any good? Havent had too much confidence in the brand judging by what they usually offer, but I'll be looking to see how they do offering USA made models now.
I'd like to know this too.
Just bought the little trapper in their new USA made line. It's well done. Though I think it's a bit pricey compared to a case alternative
@@jb7707 It's worth the slight price increase if it's better than the complete lack of QC that Case has been having for the past couple years.
Bear & Sons
No idea but I just bought this SCHRADE. I love that they are doing USA and I'm gonna support it 100 percent
I found your channel a couple weeks ago and really enjoy it.Also can you recommend a quality rescue type folder under a $100? I'm in LEO field ,thanks.
Sog Trident sounds about right, Benchmade Triage if you wanna go above that price line
@@gabrielbaker2667 Thanks for the information.
@@davidg4081 hogue makes a good rescue knife as well named the Trauma
I really like that Schrade Bruin. It’s nice sized. I bet that’ll fit in my leggings pockets so easily.
Probably call it an overmold and not a wrap for the Gerber?
See it in power tools. It’s called TPE. Thermoplastic elastomer.
flat grind on the Gerber? looks hollow to me
'tis flat -DCA
@@knifecenter straight to the point, no weeds lol. Thanks
Flipping is the word you were seeking. Maybe a segment on practice flippers in the future ? It’s a cool art form and fun way to improve dexterity,imo.Some of the “flippers” out there have amazing skill. You guys should check it out. Thanks again for an informative video.
DCA brings up a great gripe I frequently have of unlisted steel types. With companies like Wusthof it drives me crazy. I'd love to buy a few but what is in it! Searched everywhere with no answers
Wusthof's steel isn't a secret -- though it is proprietary to them. Lots of the big kitchen knife makers use proprietory steels -- what's the Shun one? VG10 Max. Anyway, Wusthof prints the formula on each blade. It's X50CRMOV15
I wish the Revo had a finger choil
Hmmm... Hey Mr. Anderson, please would you comment on the "other" show about knife brands that produce both "budget" and "premium" knives? Not different lines lie Civivi/WE or CJRB/Artisan/Ferrum Forge, but like CRKT, Kershaw, and now Schrade and Buck. Someone mentioned to me that certain shoe companies do the same, and do I think the shoes we can buy are the same as sponsored elite athletes? No, no I don't. However when we're talking steel and plastic and huge price differences I wonder how much "puffing of wares" is happening? Thanks, love your and Thomas' show. Cheers from Sandy Eggo.
Love your channel,nice nessmuk have lost interest in Spydercos too many exclusives I cant get my hands on ,just too much of a hassle -Civivi,CJRB ,WE my new favorites
There must be a huge profit margin in making knives or there would not be so many . I mean there’s a ton of them . How does Schrade keep their prices so low , gerber also ?
Got REVO Ness so we know what comes next ... LOCH Ness ...
I had to
DCA: I notice you never review Camillus knives. Would you recommend Camillus Knives? if not why?
wow, that Gerber Downwind just needs better steel.. Gimme that in Sleipner, 1095, or 14C28N and those could actually sell
That Boker Plus Atlas Gen 2 is looking way better than that James Brand for the price and for pretty much the exact same thing
Nice
Very few of these are not garbage
If you can open a bottle without a bottle opener, does that mean YOU are a multitool? 🤔🤔🤔
That's a worthy subject of debate, but it's also quite likely you are thirsty.
Mi carta, su carta
I actually really like that Kommer CRKT. I'd pay 12 bucks more for G10, but rubber works great and is just fine for the price. I do like that last Gerber fixed blade design (I really don't need full tang for a small belt knife if its made well) but of course, they used 7cr steel, which from what I can tell is about the worst version of that already low performance steel. I don't know why, but Gerber just does not do a good job with that stuff, and I've heard it compared to 420J2 or 4034 run soft. Until they step up their game, I simply won't give Gerber my business. If they show that they give a damn, maybe ill change my tune, but this knife does not help their cause. Such a waste of what could have been a really nice budget option with a decently heat treated 8cr or 12c27
Could have sworn it was a modified wharnfoote 🤔
please do a video playlist or at least a good 30min video with 30+ knives that are all carbon fiber & titanium combos.
The prices on these little plain knives are outrageous.
I just got a lg feldspar. There’s so many good knives out there , pick one on sale like a few years ago model won’t be as expensive . I see some of the prices like $300 $500 and I guess if people buy them it makes them happy but a knife is a knife like a gun is a gun . Subtle differences in quality and longevetity and craftsmanship dictates the price and I m tired of hearing “ budget” model because that would describe most of the nice things I have 😊 and I don’t consider any of them budget . I ll always take good value for money when making buying decisions . It’s stupid not to or yer rich . You pull out a knife and show the average person they could care less . They care if it works and is it sharp enough
Wayfarer looks like a working man’s knife . Looks solid $545:, lol yeah right
I wonder how easy it would be to find new rods for that fire starter in 5 years? By the time most of us would need it, they would be impossible to find. Even Benchmade, or the actual manufacturer will probably have stopped making them by then! Anyway, apart from the rod, there is not much there. Might as well start from scratch anyway.
So the WE Press Check is never coming out is it? Seriously they need to stop showing it at shows.
That Buck Squire is a bit overpriced!
DCA, you never gripped the Olamics or talked about how they feel in the hand. Was this just a miss on your part, or did you skip it because you don’t like the fit and didn’t want to have to make a negative comment?
They felt great. Big fan of the Wayfarer especially. -DCA
Your don’t have a half stop because sodbusters traditionally did bust sod. 👌🏻
That old timer looks like it's made by bear and sons
Anything’s a bottle opener if you try hard enough
Man, those Buck's are overpriced. Especially when stood next to those Aaron Fredrick customs.
You can still open a bottle with the James Brand pride tip if you got some skills. You just put it under the And you use your hand under it for leverage just like you would with a lighter. For someone like me that’s been opening beers with a lighter for years it’s actually easier than opening out and on board bottle opener. 😜
Oh my god, play the intro at 0.5x speed
Amazing -DCA
Typo and correct ammendment to preview comment.. your certificate.
Please CRKT stop using 8cr13 there are so many of your designs I would love to buy if you just upgraded the steel! I mean I've still bought multiple of the minimalist because it is only like 25 bucks but I'd happily spend 60ish for a better steel!!!
I finally gave up and got myself a spyderco, and I don't get why they're so popular. I have a couple of civivi and a cjrb that I like way better. Maybe it's the size of my hand or just my taste, but yeah, not impressed.
I’m wondering which Spyderco knife you got. With the number of different models they have, it's hard to dismiss every knife after handling just one. I’ve handles some Spydercos that I hate and have some that I love. If you are open to some advice, go and handle more models before you dismiss the brand.
Only $375:😂. I bought a custom from Pakistan that is real custom and was $30 and it’s beautiful . If I said it was $350 people would say it looks like it . Solid and heavy too , well done pakistanian shop
How much sod could a sodbuster bust if a sodbuster could bust sod? 🧐
is't a night where I am
🔥👌💪💯👍🇺🇸
Be careful, Olamic knives are NOT made in the US. They are assembled in the US.
I understand this is a business and every knife you carry is "awesome", but could you do a review of shit knives?
I miss Kieth
James brand is GARBAGE!!!!!🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Buck Saunter for $165? Ehhhhhhhh
THIS CERTIFICATES DMA THE HIGHEST LEVEL GRAND MASTER OF STEEL...
PLS. REFER TO movie CONAN THE BARB. (A.S) HIS DAD SAYS TELLS THE SECRET.
GIVE THIS MAN A RAISE!!
Please take Russian knives off your site
Starting to babble