Hi mate I’m fitting 2011 E71 (X6) spindles to my E70 (X5)and I’m wondering if you knew anything about this as the spindles themselves are actually ever so slightly longer and I’m having to think about drilling my gas struts mounting brackets to reposition the nipple. Is there any way of powering the spindles and make them retract a bit so I can fit them on and then I can code the maximum opening of the boot lid to avoid over travelling Module and plugs are all the same apart for the annoying limit switch to fit on lower tailgate that’s of course not present on X6 and that suits me perfect
Hi, any chance you have these wiring diagrams, since BMW closed its TIS option they are a pain to find through the Russian alternative. My X5M came originally with the power tailgate but was removed due to owner prefrence. I did get the original control module and all the wires and the button is in place, so its just a question of buying the struts and routing the wires. However some witres have been cut and soem seem to have been removed from a plug. Having the diagram might help a bit when re-installing
Did your bmw had automatic close or not? My bmw x6 2008 dont have button for close trunk, do you know can i upgrade that or no?
Only thing to know! Was the car pre wired?
Hi, just watched this, I want this so badly! Do you offer this as a service??
I dont suppose you would be willing to fit this on my x5 for a cost?
Hi can you please tell me where I can get the wiring diagram for ten pin plug on control module, looked everywhere online can't find it. Thanks Mike.
I connected everything as I should but it does not work does it need to be coded into the car to work. I have an x3 f25
Hi mate I’m fitting 2011 E71 (X6) spindles to my E70 (X5)and I’m wondering if you knew anything about this as the spindles themselves are actually ever so slightly longer and I’m having to think about drilling my gas struts mounting brackets to reposition the nipple. Is there any way of powering the spindles and make them retract a bit so I can fit them on and then I can code the maximum opening of the boot lid to avoid over travelling
Module and plugs are all the same apart for the annoying limit switch to fit on lower tailgate that’s of course not present on X6 and that suits me perfect
Please can you post links where you got the whole kit
Hi, any chance you have these wiring diagrams, since BMW closed its TIS option they are a pain to find through the Russian alternative. My X5M came originally with the power tailgate but was removed due to owner prefrence. I did get the original control module and all the wires and the button is in place, so its just a question of buying the struts and routing the wires. However some witres have been cut and soem seem to have been removed from a plug. Having the diagram might help a bit when re-installing
Hi, if anyone needs help with the wiring of the hkl module, just contact me mikieo@live.ie
@@mikieo69 just shot an email your way. My problem is now with the fuse box and possibly missing counter wires
Should it work if not tapped in can bus ?
Where did you get the instructions from?
Nice work
what you mean by can connector
Would you fit this on my bmw for cost please.
espectacular!!
amazing