I lied on my resume saying I know how to drive this equipment got the job starting Monday n I’m excited bc this really helped me learn all the controls n I know how to drive a car so I’m sure it’s easy
Just the fourth lever, there's a lot of different style fork trucks with a fourth lever. Pretty cool though I was just here trying to figure out what they meant by "clamp truck" can't say I've seen these anywhere I've ever worked.
Yes and No cause a forklift forks are used and on a Clamp there are Blades in which there are certain differences in carrying a load and or Stacking different from a Sit-down Forklifts I drive both machines for over 12+ years and I've seen everything about these to machines
Very good and well done. Informative. I do wish you would have shown me how....to pick up different things...and how far up or low does the clamp need to be on the item of freight ??
Would have failed a test in the UK. Got into the truck on the wrong side (over the controls!!). Then took the parking brake off and operated the hydraulic controls several times..naughty naughty Mario.
Leave it to the certifier to chip the floor. This guy is rough. Dropped the clamp. Didn't even try to be gentle. Those that can, do. Those that can't, teach 🤣
My facility's maintenance guys would be freaking out because they'd think you were scratching the floor moving the clamps with the tilt pointing down. 🙂
He went on the wrong side of the forklift. He went over the controls. Instead of going in the other side meaning he would not have touched the controls . Health and safter
I got a job interview for this truck coming up an I’ve never heard it been called a clamp truck lol I’ve always heard it been called a squeeze truck but nonetheless very insightful!! Hope I pass
What lol the lights on forklift use for halos in the warehouse for pedestrians in to allow other forklift to see in a distribution center I can tell you crash lol I’m a operator 7 yrs strong
a lot of your safety training feedback is how beat up the fork or clamp truck is. 🧐 there are 2-3 months old new trucks looking like junk trucks. 🥴 a good driver makes all the difference
You got on the forklift the wrong way you should never get on the side where the levers are, also the way you have parked you hoist the forks need to be tip down touching the floor.
I lied on my resume saying I know how to drive this equipment got the job starting Monday n I’m excited bc this really helped me learn all the controls n I know how to drive a car so I’m sure it’s easy
😂😂😂
How did it work out bro?
did you pass
So are you still there today 😂😂
I did the same thing lol I’ve driven one a couple times but that’s it it’s easy
Thanks I've been doing production work since I was 19, and I am now 30 and you helped me get my first forklift position. 😁😁😁
Hi what type of lift did you have your test on clamp/sitdown??
@@jessieurgea9899 It’s a Crown clamp stand up.
sameeee
Basically if you can operate a regular forklift, you can operate this👌🏻
Just the fourth lever, there's a lot of different style fork trucks with a fourth lever. Pretty cool though I was just here trying to figure out what they meant by "clamp truck" can't say I've seen these anywhere I've ever worked.
Not really totally different from operation a forklift.
Not the same 😂 if you had a loaded truck and you go in fork first you gone have a problem 😂😂😂
Yes and No cause a forklift forks are used and on a Clamp there are Blades in which there are certain differences in carrying a load and or Stacking different from a Sit-down Forklifts I drive both machines for over 12+ years and I've seen everything about these to machines
thank you bro I gotta job coming up I do the regular lifts I've done the stand up clamp
I have a test to take tomorrow and this was a great crash course. Thank you!
Same
Same 😂
À
Same
You did a damn good job on explaining the clamp I start my new clamp job on Wednesday October 4th thanks 👍🏿👍🏿
Thank you for making this "how to.." on these forklifts. Ready to take my classes and a lot more relaxed thanks to this. Keep up the great work brotha
Very good and well done. Informative. I do wish you would have shown me how....to pick up different things...and how far up or low does the clamp need to be on the item of freight ??
Got a test today. I have some experience but struggle to take product down from the top of the pallet. Hopefully it goes well.
If you can drive a car you ca drive a lift! just remember to always look around you and handle the product with care!
Very good class instructor... well explained.
Thanks man I thought it be harder than sit down forklift
Me too
Can you guys upload every Daily and I love your channel and Videos
Good job, plz am forklift operator how can help me to know more
Awesome video👍🏽
Would have failed a test in the UK. Got into the truck on the wrong side (over the controls!!). Then took the parking brake off and operated the hydraulic controls several times..naughty naughty Mario.
😂😂😂🤦♂️
Good point
Nice for us brother thx for your explanation ❤❤
Leave it to the certifier to chip the floor.
This guy is rough. Dropped the clamp. Didn't even try to be gentle.
Those that can, do. Those that can't, teach 🤣
vers interesting my freind. good luck.
How do you know when your load is secure
My facility's maintenance guys would be freaking out because they'd think you were scratching the floor moving the clamps with the tilt pointing down. 🙂
30 minutes later after the stupid checklist you are ready for your first break. 😂
Very concise and well paced. Thank you.
Super instructuve class and thank you
Do you always travel with your clamps behind you even if you dont have a load?
AT 6:50 ELECTRIC PALLET JACKS NOT TRAVELING AT A SAFE DISTANCE OF 3 PIT LENGTHS ... IJS
He went on the wrong side of the forklift. He went over the controls. Instead of going in the other side meaning he would not have touched the controls . Health and safter
4 points of contact is not physically possible it’s 3 points…. You have 2 hands and 2 feet you have to lift a foot to get on
😅😅😅
I got a job interview for this truck coming up an I’ve never heard it been called a clamp truck lol I’ve always heard it been called a squeeze truck but nonetheless very insightful!! Hope I pass
Nice video thanks
Good job thank you
Pls were can I get a physical tranning?
Disagree with lights always being on. On for trailers. Off in warehouse. Lights can create a hazard for oncoming people or operators.
What lol the lights on forklift use for halos in the warehouse for pedestrians in to allow other forklift to see in a distribution center I can tell you crash lol I’m a operator 7 yrs strong
True
You would hate my workplace, then. Forklift lights have to be on at all times.
every company i’ve worked for makes you keep them on at all times in case power or lights or something go out
Pure awesome
Where can I apply for a certification in Los Angeles or school
How to insert the key back in
Hi how you doing I’m very very interested for the class ❤ i’m looking for someone who can trade me for this class
What type if crown model is that?
That looks very old we only have Trucks with Joysticks
never climb over the levers to enter! Jeez!!
I usually work with forklift clamp like that,and I need a job,please give me a job I'M from indonesia
I thought it has a rotating controls for grablift
ive used this on ice cream buckets lolololol
I guess you no longer work there.?
Sheesh
nice
Thank you brother
Thinking of the boxes,😁
Thank you
Where is your Clamp open Guard system button located?
a lot of your safety training feedback is how beat up the fork or clamp truck is. 🧐 there are 2-3 months old new trucks looking like junk trucks. 🥴 a good driver makes all the difference
Just hate these fucking things, give me the high lo with regular forks man
Same lmaooo
Why bro
Exprence 10 years, lm shahin alom
Hilarious that using these requires a certification like it's rocket science. For the pay it's not worth the time
Definitely worth the pay, got certified and I'm making 21.50 an hour while guy with no certification is making 15.00 an hour
Place I'm applying at pays 24$ with experience!!
Says the person probably not certified and if you are, probably a mediocre driver.
Here because I lied on my resume
Es easy
You got on the forklift the wrong way you should never get on the side where the levers are, also the way you have parked you hoist the forks need to be tip down touching the floor.
That lift is junk
This place needs a new safety rep imo
Piece of cake