You can make old WRXs into absolute monsters. There is just so much you can do to them. I took an old bugeye wagon and left the outside all dinged up and such and dumped like 5k worth of mods in it. It's just crazy fun to drive and it is a big time sleeper. I want to make a lifted off road wagon as well. Looks like so much fun
The truly one thing that grinds my gears about a Subaru. The shared oiling of the 2 and 3 rod bearing , the path of least resistance will totally leave your 6,6k burnout throwing one of those rods up through the intake and dent the hood. Good by engine #22, but you have to understand these engines were absolutely put to the test. I should be a Subaru tester for Fuji if it withstands me, well it should hold up for everyone else just fine.
Check out race works overland coilovers! They're fucking expensive but look legit. And ADF torque locker! I'm just waiting for someone to start making longer control arms and axles.
@@elajacupples fair enough. I'm not sure why you need brembos for an offroad-oriented build. Even in stage rally, they use 15" wheels so I'm sure you could find some good brakes that fit in 15s
@@buffalobill7016 I built one that is 5" including the tires and about the same. Not to mention if you look at where the bumper would be 10" down it would be slammed, not stock.
This is 100% 10+ inches of lift all together. Wheels give it a 2 inch lift King springs give it a 1.5 inch lift Forester struts give it a 1.5 inch lift And then i have the SLO 5/5.5 inch lift kit installed
You can make old WRXs into absolute monsters. There is just so much you can do to them. I took an old bugeye wagon and left the outside all dinged up and such and dumped like 5k worth of mods in it. It's just crazy fun to drive and it is a big time sleeper. I want to make a lifted off road wagon as well. Looks like so much fun
That was pretty sweet having the tug-a-Ford contest
That was a S10 lol
@@Z3CHYDthat’s what it’s called.
This thing is so sick. I need to find a wrecked sti and swap everything over to my lifted 06 wagon
Super cool, looks like it's ready for the Dakar rally or perhaps a debut in a Mad Max film
The truly one thing that grinds my gears about a Subaru. The shared oiling of the 2 and 3 rod bearing , the path of least resistance will totally leave your 6,6k burnout throwing one of those rods up through the intake and dent the hood. Good by engine #22, but you have to understand these engines were absolutely put to the test. I should be a Subaru tester for Fuji if it withstands me, well it should hold up for everyone else just fine.
One of these days, we will meet somewhere in America and initiate the Battle of the Baja's 😎
Hell yea dude!!
One of these days huh ?! 🤔
😅
Real passion in that dude I felt it
Super dope glad the wait is over lol
Love the gear knob
Thank you!
That WRX is sick.
so sick
Badass I want to do this with my 2012 impreza 2.0 i
Wagon gang!!!
Check out race works overland coilovers! They're fucking expensive but look legit. And ADF torque locker! I'm just waiting for someone to start making longer control arms and axles.
Torq locker only works for 5 speeds unfortunately
This thing is so sick🥵
Preciate it big man
Add some black fender extensions and it will look even more amazing. Definitely worth the 25k
I will do the sedan wide body up front sometime
Gotta Get some TSSFab subframes in there
I put tires that big on my subaru and i got an abissmal 14 mpg city and 20mpg highway.
Ej22
Sounds about right haha
Hey, I’ve got the same rims!
What you drive?
Need to get some wide body fenders.
Mechanic: How much offset do you want?
AGT: Yes
😂😂
So I've Forester lifted two of my subies over the years and almost immediately everytime I tear my cv boots up front. Any advice for that ?
Check out my video about axles. It's got testimonials from the lifted subie society. Should point you in the right direction
how much life do you get out of your CV-shafts
Currantly working a video for axles and subarus to post Monday. But if your curious reach out to Elaja on his insta linked in the video description.
Do you a list of everything that you put in the car 🚗
Yes sir 👏
$25k upgrade down the Toliet.
You sad bro
Seriously, what a waste
Near blodget? or however you spell it. I’m in Corvallis trying to decide to lift or lower.
You can find Elijas Instagram in the video description. That's the best place to reach him for questions.
Newton IA
25g and the chassis is full of rust?
Yes sirrrr. Show me a car that's lived in the salt belt for 20 years that isn't rusted.
25 grand into it and your front tires are cambered asf
What a beautiful girl. 🥰
this is perfect. and then you put wheel spacers. smh
Fit 15" wheels around brembos and I'll get rid of em
@@elajacupples fair enough. I'm not sure why you need brembos for an offroad-oriented build. Even in stage rally, they use 15" wheels so I'm sure you could find some good brakes that fit in 15s
@Benjamin Baker I have brembos because the stock 5 speed is glass and I wanted a extremely reliable setup
You can swap to a 6 speed without changing hubs and brakes though
That's definitely not 10 inches of lift.
It looks like it is man
@@buffalobill7016 I built one that is 5" including the tires and about the same. Not to mention if you look at where the bumper would be 10" down it would be slammed, not stock.
@@WoodyBmx25 he was talking about the ground clearance
This is 100% 10+ inches of lift all together.
Wheels give it a 2 inch lift
King springs give it a 1.5 inch lift
Forester struts give it a 1.5 inch lift
And then i have the SLO 5/5.5 inch lift kit installed
Typical suburu owners
Perhaps? Get a dog? 😀
All these pos engines need is more stress
Yet it still runs… 🤔
@OnlyGod MayCommandMe one spank
It's called. How to ruin a beautiful car!
It's called having fun with a 2,000$ car
Thats more than a 2k car bruh
I spent 2600$ on the car @@donniepradith28