F250 Upfitter Switch Wires #dashcam #firelight #f250 Vantrue Camera Install STL Raptor Light Install The dash cam I used is a Vantrue. Link below. amzn.to/4dEoj0G
The wires come out under the fuse box. These are the wires from the switches inside the truck. This is where you connect them to whatever you are hooking up.
So you tied your cameras into the fuse box under passenger side? And you tied your lights until the upfitter switch that has nothing to do with the fuse panel you tied your camera into right? I'm a bit confused what you needed the fuse panel for under passenger dash still. Why not tie your camera into an upfitter switch?
Camera needs a hot + all the time wire. That way it can start recording if it senses a hit by another car while parked. The upfitter switches are for the fire lights.
Outstanding sir, thanks for taking the time. My 2024 Superduty is on the way and I’ll be doing the same thing soon.
Thank you.
My man! Spent a week on here looking for a video that explained this as well as you just did! Much appreciated brother👍🏻👍🏻
Glad I could help. Thank you for watching.
Very good video 👍🏼
Thank you
I’m a little confused if you’re wiring, the lights to your Upfitter switches, why did you need to tap to the fuse box?
The wires come out under the fuse box. These are the wires from the switches inside the truck. This is where you connect them to whatever you are hooking up.
The fuse box was for the camera. It needs a hot wire to function while parked. Upfitter switches don’t work with the truck off.
So you tied your cameras into the fuse box under passenger side? And you tied your lights until the upfitter switch that has nothing to do with the fuse panel you tied your camera into right? I'm a bit confused what you needed the fuse panel for under passenger dash still. Why not tie your camera into an upfitter switch?
Camera needs a hot + all the time wire. That way it can start recording if it senses a hit by another car while parked. The upfitter switches are for the fire lights.