Panavia Tornado GR.1 Italeri 1/32

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 160

  • @srednivashtar5432
    @srednivashtar5432 8 วันที่ผ่านมา +1

    Great job with this model. The attention to detail is superb, and I am in awe of your skills. Just a couple of tips for anyone else who is watching and looking to build a Tornado, and is looking for some extra realism.
    1. There are almost always black boot sole mark scuff marks on the top front of the drop tanks, as that’s what the ground crew use to get up on the fuselage when there’s not enough cockpit ladders (there’s never enough ladders).
    2. After the aircraft has been on the ground a short while, the hyds will dissipate to base pressures, and the main undercarriage doors will sag/droop.
    3. The canopy will also droop over time. The type of ladders shown clip on over the side of the cockpit, so when it’s open, a canopy strut is always fitted to prevent the canopy sagging onto the ladder and damaging it (plus strong winds can twist and damage it). It is only removed shortly before the aircrew arrive (along with the other blanks, but not the pins and ground locks), and the hyd system has been hand pumped up by the see-off crew.
    Oil streaks under the fuselage, of which there are a lot, are usually not black, but red (hyds) or golden (engine/gearbox). They will be very sticky, so lots of things stick to them, particularly sand (for a ‘Gulf’ themed jet), hair and insects, which also affects the colour. They are rarely, if ever, cleaned off on a jet on operations.

    • @MartiniModels
      @MartiniModels  2 วันที่ผ่านมา +1

      Hi mate@
      Your report on the Tornado is absolutely incredible.
      I'm sure it will help a lot to colleagues who want to build this beautiful plane.
      Greetings from Brazil!

    • @srednivashtar5432
      @srednivashtar5432 2 วันที่ผ่านมา

      @ Hello Brazil! Loved your model and video, and none of my comments were meant as criticism. You obviously have a passion and a talent to do the absolutely best job you can, and I’m hoping may help others who may want to try and achieve something as close as they can to what you make.

  • @lesthiele4921
    @lesthiele4921 ปีที่แล้ว +6

    Greetings my friend, you have done a superb job on the Tornado, you have truly done great justice to this old war horse, best regards from Australia 👍👍👍👍

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Hi my friend!
      Thank you for kind words!
      I like a lot this plane!
      Best regards from Brazil! 👋😉👍

  • @normansmith8184
    @normansmith8184 ปีที่แล้ว +1

    As an addition to my previous comment, Luiz that is the most natural looking finish to a model of an operational aircraft that I have seen. Bravo from England.

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Hi Norman!
      Thanks a lot my friend!
      Best regards from Brazil!

  • @ottopanzer7574
    @ottopanzer7574 4 หลายเดือนก่อน +1

    Que trabalho bom demais é esse, meu!
    Como não gostar de todos os videos desse canal!
    Obrigado, é um prazer para os olhos para quem gosta de avião.
    Esperando mais. Um abraço da Italia.

    • @MartiniModels
      @MartiniModels  4 หลายเดือนก่อน

      Olá Otto!
      Esse trabalho realmente ficou muito bacana!
      Acho que um dos melhores que fiz até hoje!
      Fico feliz que esteja gostando do canal e que ajude em suas montagens!
      Em breve mais 1 vídeo aqui!
      Aguarde!
      Um abraço!

  • @philippeprovost320
    @philippeprovost320 ปีที่แล้ว +2

    Congratulations !!!!! very nice . France

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Thanks mate!
      Best regards from Brazil!

  • @normansmith8184
    @normansmith8184 ปีที่แล้ว +1

    From England, outstanding work sir. You have done great service to one of my three favourite jet fighters of all time. Thank you.

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Ho mate!
      Thank you for your comment!
      Best regards from Brazil!

  • @jayrohumbertoguzmanvalenci1351
    @jayrohumbertoguzmanvalenci1351 ปีที่แล้ว +3

    Qué podemos decir más que solo un millón de gracias estimable Luiz, por un hermoso trabajo de extremo a extremo. Primorosidad en los detalles, una ejecución de pintura, armado y envejecimiento, maravillosos e impecables, y las recomendaciones en el armado que nos viene muy bien en razón de la escala de este hermoso avión. Mis felicitaciones sinceras Luiz por tu extraordinario talento modelistico, y me inspira este sobresaliente video pues ya compré mi Tornado GR1 de Revell Germany para emprender éste bellísimo proyecto. Recibe mi cordial y respetuoso saludo, desde Guatemala, la Tierra del Quetzal, símbolo de la Libertad.

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +2

      Olá Jayro!
      Muito obrigado por suas palavras.
      Esse seu comentário me incentiva ainda mais a fazer novos vídeos e ajudar os colegas nesse hobby tão apaixonante!
      Um grande abraço e saudações do Brasil! 😉👋

    • @jayrohumbertoguzmanvalenci1351
      @jayrohumbertoguzmanvalenci1351 ปีที่แล้ว +2

      Gracias a tí nuevamente Luiz por esa humildad de corazón de compartir técnicas y talento modelistico a cada uno de tus suscriptores que seguimos tus extraordinarios videos. Un gran abrazo y un saludo cordial a tu persona y al hermano país de Brasil, hermosa y mágica tierra que algún día tendré el gusto de conocer.

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +2

      @@jayrohumbertoguzmanvalenci1351 Eu que agradeço por assistir os vídeos e deixar seus comentários!
      Um grande abraço!

  • @sanvean4601
    @sanvean4601 ปีที่แล้ว +4

    Tornado is in my opinion one of the sexiest planes in modern warfare history and you did an amazing work on this model. I was thinking about buying the kit, but it`s definitely too difficult for me. What I would like to propose is cockpit preparation and painting in more details, as the result was great and it could be a good lesson. Thank you for sharing the video!

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Hi mate!
      This kit is a big challenge, but the result worth it!
      Thank you for your comment!
      Cheers! 😉👋

  • @andersoncandido2803
    @andersoncandido2803 ปีที่แล้ว +3

    Achei muito interessante essa montagem , porque normalmente montamos e depois pintamos , aqui já montou pintado , top demais , mas reparei tbm que os encaixes desse kit são muito bom , praticamente nada de funilaria, o que já ajuda muito , pintura ficou show demais , ficou bem realista, excelente trabalho.

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Olá Anderson!
      Muito obrigado!
      No caso desse kit eu preferi pintar em partes por causa do tamanho e peso. Se eu montasse inteiro teria mais dificuldade para fazer o acabamento e ficar manuseando. Além disso wlimino o problema de overspray (acúmulo de tinta nos cantos). O que seria necessário lixar e dar maus acabamento!
      Um abraço!

    • @andersoncandido2803
      @andersoncandido2803 ปีที่แล้ว +1

      @@MartiniModels excelente ideia ,no meu próximo kit vou aderir a esse estilo de montagem ,pintar antes de montar,pensando bem ajuda bastante,valeu martini

  • @jesserivas1387
    @jesserivas1387 ปีที่แล้ว +1

    Beautiful work! 👍🏻👍🏻
    Greetings from Las Vegas, Nevada

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Hi Jesse!
      Thanks mate!
      Greetings from Brazil!

  • @joemoore4027
    @joemoore4027 ปีที่แล้ว +1

    Excelente !!!! Beautiful job my friend. The weathering is tastefully done and totally realistic. I commend you on your skills !

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Hi Joe!
      Thank you for your kind comment! 👋😉
      Cheers!

  • @fredtedstedman
    @fredtedstedman ปีที่แล้ว +2

    Beautiful job ! first one in 1:32 I have seen actually completed . Pink is the best colour for a Tornado !! subbed , best wishes from Wales .

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Hi Fred!
      Thank you my friend!
      Best regards from Brazil! 😉👋

  • @stefanomazza1127
    @stefanomazza1127 ปีที่แล้ว +1

    Maravilhoso!!! Na minha opinião, um dos mais bonitos do canal… excelente trabalho! 👏👏👏

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Olá Stefano!
      Muito obrigado pelo elogio!
      Eu também achei o mesmo! 😉
      Um abraço!

  • @ScaleHangar182
    @ScaleHangar182 ปีที่แล้ว +2

    Muito bom!

  • @tarcisioghignattibeckenkam4845
    @tarcisioghignattibeckenkam4845 ปีที่แล้ว +1

    Como sempre muito bom! O Tornado é o feio que fica bonito… fuselagem quadrada, entradas de ar pequenas, asas desproporcionais, e o enorme estabilizador vertical. Enfim, tudo que um radar de interceptação gosta. E fala a verdade, tem mais investimento em extras que no kit..rsrs Show! Abcs!

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +2

      Olá Tarcísio!
      Eu acho esse avião lindo!
      Esse modelo foi feito sob encomenda! Os acessórios são por conta do cliente! 😉
      Sem dúvida o gasto com acessórios é mais alto que o valor do kit!
      Um abraço!

  • @fabiosilva3799
    @fabiosilva3799 ปีที่แล้ว +2

    Outra obra de arte...parabéns!
    Acho o Tornado um caça lindo e imponente !

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Olá Fábio!
      Muito obrigado!
      É um avião imponente!
      Um abraço!

  • @pjplasthobby
    @pjplasthobby ปีที่แล้ว +2

    Show de montagem, parabéns

  • @jeferson_romanini
    @jeferson_romanini ปีที่แล้ว +3

    Mais uma excelente montagem, parabéns ficou top

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Muito obrigado pelo elogio!
      Um abraço!

  • @cadetecamundongo-rj6xn
    @cadetecamundongo-rj6xn ปีที่แล้ว +1

    Ok meu amigo falar o quê? Caraca excelente 😃😃😃😄😄 é um dia caças pós o nosso A1, xavante e f5 ambos da FAB esse é sem dúvidas um dia meus preferidos... falar o quê sabe como é né. Excelente....

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Olá meu amigo!
      Muito obrigado!
      Eu gosto bastante dos aviões da FAB!
      Um abraço!

  • @willianoliveira3794
    @willianoliveira3794 ปีที่แล้ว +3

    Excelente modelo....ainda mais nessa escala incrivel 1/32....amazing job ...congratulations

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Muito obrigado Willian!
      Um abraço!

  • @claudiomachado3317
    @claudiomachado3317 ปีที่แล้ว +2

    Parabéns Martini, esse Tornado ficou realmente sensacional !!!

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Fala Claudião!
      Um dos melhores modelos que já fiz!
      Abração!

  • @ericocampos6963
    @ericocampos6963 ปีที่แล้ว +1

    O Tornado já é um avião muito bonito, pintado e montado pelo Martini, fica nessa padrão top que vimos no vídeo. Parabéns pelo seu trabalho e obrigado por compartilhar o processo de montagem!

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Muito obrigado Érico!
      Realmente o Tornado é avião lindo mesmo!
      A ideia do canal é ajudar e desmistificar as diversas técnicas!
      Um abraço! 👋😉

  • @wilson561
    @wilson561 3 หลายเดือนก่อน +1

    Tu trabajo es excellente! Me gusta como lo armaste y le diste el airbrush.

    • @MartiniModels
      @MartiniModels  3 หลายเดือนก่อน

      Muchas gracias Wilson!
      Saludos desde Brasil!

  • @johntreloar8203
    @johntreloar8203 ปีที่แล้ว +2

    Nice work, very highly detailed,

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Hi John!
      Thank you mate!
      Cheers!

  • @mp-modelplastic
    @mp-modelplastic ปีที่แล้ว +1

    Espectacular trabalho, muito bom video. Ficou top, Saudações de Portugal 😉👍

  • @emersonmasela294
    @emersonmasela294 ปีที่แล้ว +3

    Sensacional!!! Parabéns Luiz, trabalho incrível!!!

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Muito obrigado Emerson!
      Grande abraço! 👋😉

  • @blumax68
    @blumax68 ปีที่แล้ว +3

    Beautiful work... beautiful weathering.... just the cockpit is for a Gr.4 version not Gr.1.
    What color did you use for "desert pink"??? It's work very very good!!!

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Hi mate!
      I know that, but this model was a commission and the customer didn't mind changing the interior!
      I used the FS 33519 for the Basic color and the FS 30279 for the shades!
      The mixtures I made myself!
      Thanks for your comment!
      Cheers! 😉👋

  • @Mclaren829
    @Mclaren829 ปีที่แล้ว +2

    big palne!nice build!

  • @defdef6230
    @defdef6230 ปีที่แล้ว +1

    Excelente trabajo y formidable edición de video 👏... te sigo en instagram y TH-cam... saludos desde Argentina Luiz!

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Hola amigo!
      Muchas gracias por seguirme en Instagram y aqui en TH-cam!
      Saludos desde Brasil!

  • @mab.natureza
    @mab.natureza ปีที่แล้ว +1

    Boa tarde, um dia quando você puder, montaria o Savóia Marchetti SM 79 Spaviero escala 1/48 da Trumpeter? Obrigado e lhe parabenizo pelo excelente trabalho com os modelos

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Olá!
      Esse kit eu já montei mas na época ainda não tinha o canal!
      Posso te escrever que o kit é bom para montar apesar de erros em algumas partes.
      A abertura das naceles está muito larga.
      Eu fechei um pouco utilizando placas de plástico para diminuir o diâmetro!
      Os profundores estão com a medida errada, o telado da fuselagem é muito pronunciado, mas o modelo montado fica muito vistoso!
      O melhor kit desse avião é o da Classic Airframes!
      Um abraço!

  • @fnm0491
    @fnm0491 ปีที่แล้ว +2

    Muito hermoso , muy buen avion y quedo perfectiño garoto hermoso!! , muy bueno felicitaciones y un abrazo desde argentina

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Muchas gracias amigo!
      Saludos desde Brasil! 👋😉

  • @Bratovitch
    @Bratovitch ปีที่แล้ว +1

    Fantástico kit. Parabéns!

  • @goforitpainting
    @goforitpainting ปีที่แล้ว +2

    Really cool details. I am just starting to build a KA-6D Intruder.

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Thanks mate!
      The KA-6 is a fantastic plane and big too!
      Cheers!

  • @alexw.2344
    @alexw.2344 ปีที่แล้ว +2

    Wow, a wonderful kit and an outstanding work. Well done!
    I have the old kit from Revell and I want to build it in the next months. It will be one of the Tiger-Tornados.
    Alex

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Hi Alex!
      This kit is much better than the Revell's kit, but it's reasonable!
      Cheers!

    • @georgem4713
      @georgem4713 ปีที่แล้ว +1

      Same here, found the Revell in a sale for a really good price. The kit is decent, however i do not have the skill to match it.
      The video is great, the build is super nice. Thank you for the upload. Greetings from Greece.

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      @@georgem4713 Hi George!
      Yes, it's a good kit too!
      The secret to perfection is to build and build.
      Thank you very much for your comment!
      Best regards from Brazil! 👋✌

  • @edgarrojas2211
    @edgarrojas2211 ปีที่แล้ว +1

    Excelente trabajo...una pieza maestra...saludos desde México.

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Muchas gracias amigo!
      Saludos desde Brasil!

  • @vincenzomor1964
    @vincenzomor1964 ปีที่แล้ว +2

    Beautiful! Thanks for the sharing!

  • @ramonp.7095
    @ramonp.7095 2 หลายเดือนก่อน +1

    Que tal um solvaset nos decais? Excelente trabalho ! Sempre montagens perfeitas!

    • @MartiniModels
      @MartiniModels  2 หลายเดือนก่อน

      Muito obrigado!
      Um abraço!

  • @tonerotonero1375
    @tonerotonero1375 ปีที่แล้ว +1

    Gorgeous. Great kit skillfully assembled and painted. Respect!

  • @rhylschermatz5809
    @rhylschermatz5809 5 หลายเดือนก่อน +1

    OBRIGADO, belle réalisation, merci.

    • @MartiniModels
      @MartiniModels  5 หลายเดือนก่อน

      Muito obrigado!
      Lembranças do Brasil!

  • @ricardomeirelles8616
    @ricardomeirelles8616 ปีที่แล้ว +2

    Adoro esse avião e essa versão....na sua mão ficou espetacular meu amigo !! Parabéns !! Esse kit da Italeri é bem superior ao da Revell.....

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Olá Tandill!
      Myito obrigado pelo elogio!
      Sim, esse kit da Italeri me impressionou bastante!
      Vale a pena!
      Grande abraço! 👋😉

  • @beanhavok2287
    @beanhavok2287 ปีที่แล้ว +1

    Spectacular!

  • @vodkamolotov-scale-modeler
    @vodkamolotov-scale-modeler 5 หลายเดือนก่อน +1

    Beautiful work. Greetings from Mexico

    • @MartiniModels
      @MartiniModels  5 หลายเดือนก่อน

      Thanks mate!
      Greetings from Brazil!

  • @ralphyhiroshirocha8743
    @ralphyhiroshirocha8743 ปีที่แล้ว +1

    parabéns Martini!

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Muito obrigado Ralph!
      Um abraço!

  • @cadetecamundongo-rj6xn
    @cadetecamundongo-rj6xn ปีที่แล้ว +1

    Meu amigo desejaria também um dia visualizar o caça f5 FAB com camuflagem dos agressores EUA 😊😊😊😊.. muito bonito quê acho quê deveria ser padrão na FAB. Como Colocar sujeira no caça ok de manuseio ou uso pelo tempos.. parabéns pelo seu canal 😊

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Esses modelos são feitos sob encomenda.
      Eu gosto bastante da pintura dos aggressors americanos.
      Na FAB a camuflagem atual é apenas em cinza e verde.

  • @septiccalling8341
    @septiccalling8341 ปีที่แล้ว +1

    Brilliant.....she's a beauty! 👍🏻👌🏻👏🏻

  • @jantimmer5558
    @jantimmer5558 ปีที่แล้ว +1

    Great work

  • @darthhokum
    @darthhokum ปีที่แล้ว +2

    Perfect work 😍

  • @giorgiobeda8642
    @giorgiobeda8642 ปีที่แล้ว +1

    Best tornado ever 😮

  • @paulorobertofreitasgomesgo1648
    @paulorobertofreitasgomesgo1648 7 หลายเดือนก่อน +1

    Espetacular!!!

    • @MartiniModels
      @MartiniModels  7 หลายเดือนก่อน

      Muito obrigado Paulo!
      Um abraço!

  • @lesvenus3788
    @lesvenus3788 ปีที่แล้ว +1

    Stunning

  • @caiosalespaes2859
    @caiosalespaes2859 ปีที่แล้ว +3

    Obrigado por responder. Não expliquei bem a pergunta. Tenho mais de vinte modelos que eu mesmo produzi os decais. Nestes casos eu recortei um pedaço de decal branco para usar embaixo do colorido, mas infelizmente é muito dificil recortar desenhos com muitos recortes. No seu caso pareceu que você utilizou uma impressora com tinta branca.
    Minha pergunta é se você comprou esta impressora ou conseguiu uma gráfica para imprimir?

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Oi Caio!
      Sim, usei a impressão do branco impresso separadamente!
      Fiz 2 arquivos, o colorido e outro apenas com o branco!
      Enviei para uma gráfica especializada em impressão para decais!
      A SIRAP: 4139-6196 (Fabiana)
      Eu uso há bastante tempo o serviço deles, inclusive eles vendem a folha para impressão a laser e a jato de tinta!
      Qualquer coisa estou a disposição!
      Um abraço!

  • @pierrephilippe4689
    @pierrephilippe4689 ปีที่แล้ว +2

    Magnifique réalisation, ca doit faire un gros bébé au 1/32

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Olá Pierre!
      Muito obrigado!
      Sim, é um modelo enorme!
      Saudações do Brasil! 😉👋

  • @caiosalespaes2859
    @caiosalespaes2859 ปีที่แล้ว +1

    Boa noite! Lindo Tornado. Fiquei com duvida de como você fez os decais brancos

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Olá Caio!
      A impressão é feita em 2 folhas. O branco e o colorido!
      Da arte original onde temos todas as cores e o preto, é feito outra arte onde deverá ser impresso o branco.
      Tudo o que é colorido é pintado em branco!
      E tudo o que é em preto é deletado!
      Espero que tenha esclarecido!
      Um abraço!

    • @caiosalespaes2859
      @caiosalespaes2859 ปีที่แล้ว

      @@MartiniModels Boa noite!
      Obrigado por responder. Não expliquei bem a pergunta. Tenho mais de vinte modelos que eu mesmo produzi os decais. Nestes casos eu recortei um pedaço de decal branco para usar embaixo do colorido, mas infelizmente é muito dificil recortar desenhos com muitos recortes. No seu caso pareceu que você utilizou uma impressora com tinta branca.
      Minha pergunta é se você comprou esta impressora ou conseguiu uma grafica para imprimir?

  • @galberlimacosta388
    @galberlimacosta388 ปีที่แล้ว +2

    SHOW!!!

  • @Mauscmkwk
    @Mauscmkwk ปีที่แล้ว +1

    You should try the revell 1/32nd scale f 14 tomcat

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Hi mate!
      I have Trumpeter's F-14A in 1/32 scale!
      Cheers!

  • @091691k
    @091691k ปีที่แล้ว +1

    Olá Luiz, parabéns, ficou fantástico, para mim o meu preferido de entre os excelentes kits que montaste. Podes partilhar a marca da tinta que utilizaste?
    Obrigado
    Um abraço

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Olá!
      Muito obrigado pelo elogio!
      A marca da tinta que uso é da Sherwin Williams e do verniz também!
      As cores eu mesmo que faço todas que preciso a partir de referências do Federal Standard 595.
      Qualquer coisa estou a disposição!
      Um abraço!

  • @hiranhorta
    @hiranhorta ปีที่แล้ว +2

    Vai por este pequeno kit aonde? No meio da sua saka? 1/32 é ENORME!

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Olá Hiran!
      Esse modelo foi feito sob encomenda!
      É um modelo enorme!
      Haja espaço! 😅😅😅😅
      Um abraço!

  • @dimedarrell8935
    @dimedarrell8935 ปีที่แล้ว +2

    Posso estar enganado, caças de asas variáveis são o F14 TOMCAT e o PANAVIA TORNADO, que modesta parte são incríveis, agora essa obra de arte é digna de ficar no Hall de entrada da RAF em homenagem ao esquadrão que combateu na guerra do golfo em 1991...

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Na verdade temos vários aviões com a geometria variável, o SU-24 Fencer, Mig-23, TU-22, TU-160, o F-111, B-1B Lancer.
      Um abraço!

  • @remous276
    @remous276 10 หลายเดือนก่อน +1

    I have been looking everywhere for paint for this kit but just cant find it, do you anywhere that does it or which model brand, in particular revell?

    • @MartiniModels
      @MartiniModels  10 หลายเดือนก่อน +1

      Hi mate!
      I mixed the color of the camouflage, but I've already seen it from the MRP brand. (MRP-185 Desert Pink)

    • @remous276
      @remous276 10 หลายเดือนก่อน

      @@MartiniModels thank you so much!!!!!!

  • @cadetecamundongo-rj6xn
    @cadetecamundongo-rj6xn ปีที่แล้ว +1

    Meu amigo sendo leigo. Qual força aérea esse tornado pertence? Não visualizei símbolo de qual força aérea?

    • @Bratovitch
      @Bratovitch ปีที่แล้ว +2

      Tornados nessa cor creio que sejam a versão britânica com cores pra camuflagem no deserto nas guerras do Golfo e Afeganistão

    • @tarcisioghignattibeckenkam4845
      @tarcisioghignattibeckenkam4845 ปีที่แล้ว +1

      RAF

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Olá!
      É da força aérea inglesa, utilizado na Guerra do Golfo em 1991!
      Um abraço!

    • @cadetecamundongo-rj6xn
      @cadetecamundongo-rj6xn ปีที่แล้ว +2

      @@MartiniModels ok obrigado pela atenção 😃

    • @cadetecamundongo-rj6xn
      @cadetecamundongo-rj6xn ปีที่แล้ว +2

      @@tarcisioghignattibeckenkam4845 ok meu amigo grato..

  • @predatorterminator9897
    @predatorterminator9897 10 หลายเดือนก่อน +1

    ❤❤❤❤❤❤

  • @alexandrebolan3454
    @alexandrebolan3454 ปีที่แล้ว +1

    bom dia como eu acho essa tinta deserto pink...!?

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Olá Alexandre!
      Tem um set da Hataka com as cores utilizadas na Guerra do Iraque!
      www.hataka-hobby.com/userdata/public/gfx/1012/HTK-CS73-Modern-Royal-Air-Force-paint-set-vol.-2.jpg
      Tem da AK (British Desert Pink RC043)
      Qualquer coisa estou a disposiçnao!
      Um abraço!

  • @harrymattah418
    @harrymattah418 ปีที่แล้ว +2

    Nice job overall. Especially the moving parts of the wing, which give some volume to the model. Again, I find the panel lines far too accentuated. Not only you, but on many models we can see on YT.

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      Hi Harry!
      Thank you for your comment!
      I'll try to lighten the color of the wash a little more! 😉
      Cheers!

    • @harrymattah418
      @harrymattah418 ปีที่แล้ว +1

      @@MartiniModels It is quite difficult to calibrate the darkness of the wash. It depends on the colour of the model, and it very much depends on the ambiant light.
      A 0,5 mm line on a 1/32 model would be a 16 mm line on the real aircraft. Imagine this line full of dark wash. Reducing to 0,1 mm (quite difficult to engrave) would still be a 3,2 mm line on the real aircraft.

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว

      @@harrymattah418 Hi Harry!
      Exactly!
      The big problem in this kit that the engraved lines are too wide!
      Cheers! 👍

    • @harrymattah418
      @harrymattah418 ปีที่แล้ว

      @@MartiniModels This is very difficult to correct ! Either sanding the whole aircraft to smooth the lines, or filling the lines, and engraving sharper lines. Both are very much time-consuming and delicate.

  • @엉짱-o8v
    @엉짱-o8v ปีที่แล้ว +1

    멋집니다. 굿👍

  • @GiorgioBeltrammi
    @GiorgioBeltrammi ปีที่แล้ว +1

    Bellissimo!

  • @LincolnshireRailMonkey
    @LincolnshireRailMonkey 2 หลายเดือนก่อน +1

    It honestly breaks me that no one does an aftermarket exhaust kit for open nozzles. Drives me bananas

    • @MartiniModels
      @MartiniModels  2 หลายเดือนก่อน

      Hi Lincoln!
      I used the Reskit exhaust set.
      Can be left open or closed.
      Cheers!

  • @carlose.schild7022
    @carlose.schild7022 ปีที่แล้ว +1

    Perfeito, pena que não voa... kkkkk!

  • @garryprettyman8927
    @garryprettyman8927 ปีที่แล้ว +1

    Send the decals back. I have had a few issues with Kits World. Never use them again.

  • @СергейАртёмчик-ю5н
    @СергейАртёмчик-ю5н ปีที่แล้ว +2

    ...большая такая модель....

  • @garryprettyman8927
    @garryprettyman8927 ปีที่แล้ว +1

    Sneakers tee

  • @khalifahas717
    @khalifahas717 ปีที่แล้ว +2

    Tragedi panavia-tornado di landasan burung garuda bos hahahahaha..... semua pertempuran penuh dengan angkatan udara di rumah itu dari 'amerika rusia prancis jerman inggris' hahahaha..., *di kehakiman nasrani indonesia di lubuk pakam dengan angkatan udara, di kepolisian indonesia tg.morawa juga dengan angkatan udara.* Luar biasa bakal serangan burung-burung nya kekalifahan nanti memerangi kekafiran di ring merah-putih "lawan-lawan langsung begelempangan macam nyamuk di mana-mana" hahahahaaha.....

  • @luteroblau6955
    @luteroblau6955 ปีที่แล้ว +1

    HAS HECHO TU LAS CALCAS ?,,,,,,IMPRESIONANTE.
    POR FAVOR PODRIAS HACER VIDEO EXPLICATIVO.
    UN SALUDO .GRACIAS

    • @MartiniModels
      @MartiniModels  ปีที่แล้ว +1

      Hola amigo!
      ¡Tengo la idea de hacer un video al respecto!
      Saludos desde Brasil!