Personally, I think double sleeving, then toploader, then team bag is excessive for putting in the binder. If I were to use one of these binders, I would use a single penny sleeve, then toploader, then just put it in the binder page. Regardless, thanks for the video. That's a nice looking binder.
Hey, I bought two small toploader binders and two big ones and started to fill up a small binder but after filling up almost all sides it feels like you're bending the cards cuz you need a lot of pressure to close the binder so i stopped using these binders. It would be better if a company creating binders where the pages are more apart in the middle.
Hi! I was wondering whether you had any problems getting cards out of the top loaders when you've double sleeved them? I've tried it myself and they seem very snug inside the top loader and I'm concerned about it damaging the cards, do you have any insight on this? Thanks!
Hi sorry for the delayed response! I have yet to have any problems. However, some people say that they dont like double sleeving when putting in toploader binder. It depends on what you use. So if you feel as if it is way to tight then take out 1 sleeve and you should be good! =) Hope this helps!
Sry for such the late response 55pt toploader binders do exist but this one I dont think would be a good option. I tried googling it and found that there are many for that kind of toploader.
Its more expensive haha and it's supposed to be the better version of the two. However, I can't honestly say that it is or it isn't. Both have been purchased and both have issues. As long as the opening is not messed up you should be fine to use either or.
I have had both these toploaders in hand to test. The premium one is made of a little harder material, a little more difficulty to bend. Other than that the two main layers where the cards is in between, one of the layers is a little longer, so it is a little easier to remove a card inside. Other than that I couldnt see much.
What is the company name that created the binder and the cost? Does the top loaded card fit in the middle part of the page when you didn't show it off on video?
Thanks for the review man! How do you feel storage goes with those binders? Can you store them on top on each other? Would that be okay you think? They are quite large so I dont have a book shelves or such for them to stable them like books.
When you fill them up they can get somewhat heavy. So I would not recommend stacking them. and unfortunately they are too large for most book cases. The way I have it right now is I put it on my desk and have it open midway through since I personally like to look at it frequently.
@@daybreak748 Thanks for your reply. I will just lie one and one flat then inside my chest of drawers. I noticed that going with Regular Toploaders makes them slide 2-3 millimeters farer into the pockets than the Premium ones.
@@daybreak748 Damn, I will have to go over the toploaders and get away the small plastic bits on the toploaders? What if something get inside lol, I mean always something man. How many pockets do this binder has?
@@ericting2020 I would love to see these binders. Do you have a link to a site that sells these? Because all that I have seen are way over that price point.
Thats great to hear! So more options for people. Unfortunately I just checked and these are sold out! =(. But I have seen some other ones come up for under 50 so like you said these are getting cheaper for sure!
I have yet to have any problems. I know some people believe that it may be to much. But I think other factors also pay a role. Condensation, Humidity levels and such can also have an impact on your cards. For me living in Jersey where it doesnt get too cold or too hot I have yet to have any issues. But if you live in an area that causes the cards to bend more then double sleeving and toploader can have an impact. I also believe its personal preference too.
For sure! Penny sleeves are thin. If the opening has the big plastic chunks that are rigid then it will definitely damage the card. I showcase the toploaders in the video and showcase the type of plastic pieces that was left after production.
yea the ones that I have seen are pretty terrible. Wish there was a better way to display graded cards but honestly I have yet to find one that seems viable.
I had the same issues with Ultra Pro toploaders honestly horrible quality control and always super dusty. That's why I buy Vaultx toploaders now. Their quality is leagues ahead of Ultrapro.
I dont see why not. As long as its something that can go into a regular toploader you should be fine. Now if your talking about Patches and thicker cards like that I would not recommend.
1. literally never seen such terribly mutalited toploaders in my life 2. penny sleeves are there for a reason to protect from plastic and scratches 3. toploaders protect the card thats the point. just don't use them if they are bad quality like yours. very obvious when they are mutilated. 4. your supposed to get the little opening open a bit, then squeez the sides of the edges of the top loader slightly and the top loader opens up wide allowing you to literraly just drop the card in. then it goes back to normal protecting the card flat.
I agree with you. Am I just purchasing the wrong ones? When I purchase from amazon or an online retailer this is the crap I get sent. I have purchased multiple times and more often then not this is something I have seen and dealt with over and over again.
DO NOT USE Ultra Pro! Buy BCW!!! I’ve used UP for years until recently getting back into the hobby. Now I buy BCW all day for penny sleeves, top loaders….
Personally, I think double sleeving, then toploader, then team bag is excessive for putting in the binder. If I were to use one of these binders, I would use a single penny sleeve, then toploader, then just put it in the binder page. Regardless, thanks for the video. That's a nice looking binder.
Hey, how did it go, did you get some gemloaders?
have you filled the whole binder? Front and back? How does it hold up? It actually ain't worth it if you can't safely store a complete full binder.
Hey, I bought two small toploader binders and two big ones and started to fill up a small binder but after filling up almost all sides it feels like you're bending the cards cuz you need a lot of pressure to close the binder so i stopped using these binders. It would be better if a company creating binders where the pages are more apart in the middle.
@@BashOne16 amazon now sells a large D-Ring binder for topl loader pages. works way better and sits nicely without bending pages
Will the dragon shield resealable perfect fit sleeves would work? I was thinking of DS resealable sleeves and toploader then binder.
Hi, Thanks for video.but why do you say to avoid the non premium toploaders please ? I just bought regulars and now I am hesitant to use them.
Just FYI Ultra Pro does sell binder pages for PSA graded cards!
Ty! I know they sell the 4 plastic page but those are not that great from my experience. Have you tried them recently?
Hi! I was wondering whether you had any problems getting cards out of the top loaders when you've double sleeved them? I've tried it myself and they seem very snug inside the top loader and I'm concerned about it damaging the cards, do you have any insight on this? Thanks!
Hi sorry for the delayed response! I have yet to have any problems. However, some people say that they dont like double sleeving when putting in toploader binder. It depends on what you use. So if you feel as if it is way to tight then take out 1 sleeve and you should be good! =) Hope this helps!
@@daybreak748 I use 110 micron sleeves, put the card in upside down then put in Toploader right side up.
@@Eight8411 That is a great way to protect your cards!
4:00 for those watching in 2024 i picked up a 9 pocket by d dackitt for 20 bucks
Thanx for watching! And thanks for helping out community!!!
Thanks, this was helpful. Also, are there any toploader binders for 55pt toploaders?
Sry for such the late response 55pt toploader binders do exist but this one I dont think would be a good option. I tried googling it and found that there are many for that kind of toploader.
I bought regular top loaders ultra pro for my ultra rare pokemon cards. What is the difference between the regular vs premium?
Its more expensive haha and it's supposed to be the better version of the two. However, I can't honestly say that it is or it isn't. Both have been purchased and both have issues. As long as the opening is not messed up you should be fine to use either or.
I have had both these toploaders in hand to test. The premium one is made of a little harder material, a little more difficulty to bend. Other than that the two main layers where the cards is in between, one of the layers is a little longer, so it is a little easier to remove a card inside. Other than that I couldnt see much.
What is the company name that created the binder and the cost? Does the top loaded card fit in the middle part of the page when you didn't show it off on video?
Thanks for the review man! How do you feel storage goes with those binders? Can you store them on top on each other? Would that be okay you think? They are quite large so I dont have a book shelves or such for them to stable them like books.
When you fill them up they can get somewhat heavy. So I would not recommend stacking them. and unfortunately they are too large for most book cases. The way I have it right now is I put it on my desk and have it open midway through since I personally like to look at it frequently.
@@daybreak748 Thanks for your reply. I will just lie one and one flat then inside my chest of drawers. I noticed that going with Regular Toploaders makes them slide 2-3 millimeters farer into the pockets than the Premium ones.
@@grandiosa86 No problem! And yea that could happen since the premium is suppose to be a little thicker "better" quality so movement can happen.
@@daybreak748 Damn, I will have to go over the toploaders and get away the small plastic bits on the toploaders? What if something get inside lol, I mean always something man.
How many pockets do this binder has?
There is a mini case binders or smaller top loader that fits in normal binder
Thats cool to know! I will have to look into that. How are the cost for those?
@@daybreak748 smaller top loader 10 pieces around 10 USD
@@ericting2020 I would love to see these binders. Do you have a link to a site that sells these? Because all that I have seen are way over that price point.
@@daybreak748 atm don't have other binder ...all from Japan
Gem Loader and others are 50 as well now so i assume maybe this one is cheaper now
Thats great to hear! So more options for people. Unfortunately I just checked and these are sold out! =(. But I have seen some other ones come up for under 50 so like you said these are getting cheaper for sure!
yea, I was wondering if it will bend card especially if you max in the card in binder, I got the unbranded one at around USD10 is cheap
Hey, do you think double sleeving the cards and then putting them in the toploaders and binder will damage the cards over time due to the pressure?
I have yet to have any problems. I know some people believe that it may be to much. But I think other factors also pay a role. Condensation, Humidity levels and such can also have an impact on your cards. For me living in Jersey where it doesnt get too cold or too hot I have yet to have any issues. But if you live in an area that causes the cards to bend more then double sleeving and toploader can have an impact. I also believe its personal preference too.
hey bro u still using this? hows it held up in jan?
Sry for the late response. Yes so far the binder itself is holding up! 🙂
Perfect fits damage your cards youre doing it wrong especially double sleeving for a toploader. Too much pressure
Interesting. I have been using perfect fits for a very long time now and not once have I had any issues. I will have to look into it! TY!
Does the zipper have any branding on it?
How can top loaders damage the card if the card is inside a penny sleeve? Honest question
For sure! Penny sleeves are thin. If the opening has the big plastic chunks that are rigid then it will definitely damage the card. I showcase the toploaders in the video and showcase the type of plastic pieces that was left after production.
Great video, I’m a novice here. What size penny sleeve and top loader will I need for Pokemon cards does anyone know?
There are binders for graded cards. They're not great, but they do exist.
yea the ones that I have seen are pretty terrible. Wish there was a better way to display graded cards but honestly I have yet to find one that seems viable.
Use perfect fit top loader sleeves they are awesome!!
I will have to try them out! TY!!!
Will the dragon shield resealable perfect fit sleeves would work? I was thinking of DS resealable sleeves and toploader then binder.
Superior Fit Innovations (SFI) are all i use. They are awesome!!
I had the same issues with Ultra Pro toploaders honestly horrible quality control and always super dusty. That's why I buy Vaultx toploaders now. Their quality is leagues ahead of Ultrapro.
Ill have to check them out! Thanks for info!
*sees albedo play mat* yep I can trust this guy
Do these work for sports cards to ??
I dont see why not. As long as its something that can go into a regular toploader you should be fine. Now if your talking about Patches and thicker cards like that I would not recommend.
No, only anime (Yu-Gi-Oh, Pokemon, Weiss, etc) fit in these binders
Ayo whats that nino card??
1. literally never seen such terribly mutalited toploaders in my life
2. penny sleeves are there for a reason to protect from plastic and scratches
3. toploaders protect the card thats the point. just don't use them if they are bad quality like yours. very obvious when they are mutilated.
4. your supposed to get the little opening open a bit, then squeez the sides of the edges of the top loader slightly and the top loader opens up wide allowing you to literraly just drop the card in. then it goes back to normal protecting the card flat.
I agree with you. Am I just purchasing the wrong ones? When I purchase from amazon or an online retailer this is the crap I get sent. I have purchased multiple times and more often then not this is something I have seen and dealt with over and over again.
Over one/1 year later and the eBay link no longer works. Who is the seller?
DO NOT USE Ultra Pro! Buy BCW!!! I’ve used UP for years until recently getting back into the hobby. Now I buy BCW all day for penny sleeves, top loaders….
what are you saying?
i dont understand what are you saying
@@ZakiPolicarpio don’t buy Ultra Pro. Buy BCW for penny sleeves
bcw zip folio is a wonderful binder
but nothing is wrong with ultra 😅
If you will make a case against something, you should divulge the reasons why you say so. Otherwise, your ranting is useless and baseless.
Aaaannnd itsgone