Colt CZT Project **Custom Headlights**
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Mitsubishi Colt CZT Project
In this video I show you the process of splitting the headlights and installing LED Halo rings and sequential LED strips.
120mm and 90mm Halo Rings www.ebay.co.uk...
Sequential switchback LED strip 45cm www.ebay.co.uk...
0.4mm Piano wire www.diy.com/de...
How did u put the headlight back together the actual lens once you removed it and heated it
I re-heated the original black sealant and pushed the plastic lense back onto the housing. Refitted the clips and never had any problems
how did u make the actuall light black? just spray paint or a new headlight?
I keyed the chrome plastic trim and wiped it with a tack cloth to remove any dust. I then sprayed 2 coats of plastic primer followed by 3 coats of black, and then 2 coats of clear lacquer
When it comes to the wiring do you splice all the halo wires into the original side lights wiring so when you turn on the sides it will light up both the rings
Do you connect each 4 wires on a headlight to the sidelights original wiring
The halo rings were wired to a seperate switch because blue isn't a legal colour here in the UK. The switch back was spliced into the origial sidelight/indicator loom.
You could connect all 3 to the one sidelight, the LEDs don't draw a huge amount so it 'should' be ok
Amazing bro! Already I buy Angel eyes and this week I will do the same 😉
👍
Well done, indicators look great!
can you please explain where and how can i find the spot of making the cable managment? just a begginer and i little comfused about the cable managment
12v 6mm 50A cable was from a friend
Fuse box amzn.eu/d/3G67jhj
Cable,crimp connectors,switches and fuses were purchased from a local motor factor
COB LED strips from ebay
is it required to buy a fuse box or i just can make it in other way?
@@kokmusic11 its upto you how you do it. This method was easier and more convenient for me
@@hoodedreeperwhere did you mount the fuse box does this mean you didn’t even need to touch the fuses inside the glove box you just wired to the mini fuse box and original headlight wiring
@@Jayy149 the additional fuse box was mounted behind the glove box. I didn't touch the factory one, I made my own seperate circuit