I live IN a Faraday Cage, and it didn't require much work at all!! My method was simple, I got my hands on a 1971 Parkwood 12 foot by 60 foot mobile home which seemed to "do the trick"!! As it stands I usually have to go outside to even use my cell phone as the skin of the mobile home is all metal, even with the metal roof, and it doesn't seem to allow RF signals into the home!! Heck I can't even listen to a radio inside my home, because there are no radio wave able to get through the skin of the place!!
Ditto I live on a steel boat away from the cities. Only think now I well sensitive and can actually hear some of it when I'm in the city . It got worse lately feel waves of it passing thru at times.
I work and sleep in the aluminum trailers. Inside the trailer at my work I get 7mw/m2 outside 300mw/m2. Trailer is outside away from routers and phones. I leave my phone outside of aluminum trailer. When I get ready to sleep I put my phone into airplane mode also disabling location on it. I'm able to fall into deep stages of sleep like when I was a kid, I ground myself as well with wire to the ground rod I pounded to the ground. It's the best to use your own ground. Difference is HUGE with and with out. I was waking up 4-6 times /might before and took some time to fall back into sleep, Everything changed after I start sleeping in the aluminum trailer. I highly recommend trying it especially if you are straggling getting good night sleep
Basically any conductive metal will block the signals, even if it has holes in it as long as the holes are small compared to the frequency. That said, radio frequencies are completely harmless and it would be annoying not to have any cell signal in your home. Imagine if there is an emergency you can't even call 911 or if someone is trying to reach you urgently they may not be able to.
@@BoopSnoot "completely harmless"?! Wakeup! Who paid you to say that? Why do people get their health destroyed by cancer RADIOtherapy then? I bet you wanted to write "completely harmful"!
Great video! Before becoming a Geovital consultant I was very sick from 23 cell towers 1000 feet from our home. We had moved to a home with a water tower that didnt have towers, as the towers were is=nstalled I became progressively sicker. It got to the point I couldnt work. Anyhow once I got a hold of some good quality meters I realized I needed to do something until we could figure out what to do. My temporary fix was the aluminum screen over a portable greenhouse frame in which I slept in. The meter was reading so high that it blanked out(over 10,000mw2) to 500. Still a lot but a phenomenal difference. Amazon sells the aluminum screen. Be sure it is METAL screen! There is screen that is made of plastic and will do absolutely nothing!
I live half a block from a water tower with General dynamics 5g radios huawei and motorola installed by at and t. I put aluminum window screen under 2/3s of my new roof. Since I don't have a meter I don't know if it reduced the radiation because it was kind of an after thought in the process of roofing but it couldn't have hurt anything!
I have been trying to study this for some time now. I just cannot get it. I'm single and I'm so sick from EMF. I don't even understand the differences between rf, EMF, and microwaves. After all these years I'm feeling discouraged. Right now I'm so weak I can hardly keep myself awake and I just keep on losing weight. I'm disabled already so I'm not able to really afford much. But there is an opening for me in an antique milking parlor with a cement floor and steal siding on one side which is the side the cell towers are on. It has only a small window or two. It seems hopeful. It has to be insulated and wallboard has to be put in and of course flooring. I wonder how you are doing? And if you have any words of Hope or direction for me? Thanks
@@laualee1irmão, não coloque toda esperança nesse mundo caído, depositei sua esperança em Cristo Jesus, só ele é a salvação, busque ele, como se busca um tesouro escondido, peça pra ele te ajudar, orientar, direcionar, e te salvar, ele faz tudo isso...e ainda te recebe nos braços. Pense bem irmão, busque- o diligentemente, e verá a diferença na sua vida!! Seja tu cheio da Graça e conhecimento do Deus vivo!!❤
Thank you for the insight. Its absurd how such beautiful homes have to be modified to make a space fit for life. How long can this corporate control and legally making people sick be allowed to go on?
CFL/LED light bulbs emit RF energy. Strong enough to overpower my local AM radio station from 12 inches away. Old incandescent light bulbs do not make RF. All electronic devices also produce RF, light dimmers, clock radio, computers, fans, etc.
@Tudi Zuno yes i have been well educated and what kind of asumptions are you talking about? he is just spreading lies and thinks this guy is a mesiah, when he actually is just wasting people's time
I really need advice if you can help to the best of your ability. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps on how to shelid this room. Thank you and God bless 🙏❤️
I made a cage for my bed, aluminum mesh screen, double layered on all sides, copper wire connected running into the ground outside. Still get perfect cell service and WiFi signal inside the cage? Any advice?
Did you shield the bottom? That is important. Also, electrical grounding is not necessarily the same as putting a wire in the ground- you would need to use a ground connection on an electrical socket to make it work. Hope it works out well!
I saw similiar materials that ppl import from China and many of them contain nickel. I don't know if this one does, but it is not safe for many people and it is something to take into account. Thank You for the movie, very informative
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
I use metal mesh trash cans , cheap, to cover all cords, or use as a hamper for live electrical cords, and I use a silver lined blanket to cover my computer base, and i use shielding blankets while in front of t.v, or screens. I hardwired all devices, and dumped my cell phone, for a corded phone. no wireless in my life, and i sleep at night, have no skin rashes, and less anger /moodiness. I also use stetzer filters on each outlet.
@The General I don't think who posted this is crazy at all. If you think that converting parts or your entire home into a proper Faraday cage is crazy then we disagree. People criticizing this video asking for this person to give away their business for free by showing their tools and procedures which is funny to me because if you understand electricity all this stuff is basic knowledge. Someone that sees this video and chooses to bash it, in my simple mind I see that they are blinded by their privilege wanting things handed to them instead of seeking it out on their own. Talk to any field electrical engineer and they'll quickly see the obvious legitimacy and profitability of doing this as a business.
@The General In electricity there two fundamental concepts that in my opinion explain the danger of cm/mm waves.. These are the concepts of voltage and and current. Think of voltage like water pressure and current can be compared to the volume of water flowing. Now with those two concepts in mind let's also use the analogy of mixing fluids. If you mix water with another water like liquid they will mix seamlessly. However if you try to make water and oil no matter how much you stirr it, mix it, shake it, no matter how much it appears for a moment that it is mixed once settled they will separate. Now look at water as our atmosphere on the surface of Earth and centimeter/millimeter waves as the oil. These two things will not mix. And any type of centimeter or millimeter wave emission will always be pushed up into the ionosphere. So in order to keep these emissions down in the troposphere they have to be broadcast it at high intensity (high voltage and current) so they can go over a certain distance before being pulled up into the ionosphere. Everything is electiricty. Radiowaves are no different than the electricity going through a wire. It's the intensity and amplitude that changes how it behaves and what we call it and as any electrician will tell you it's not the voltage the kills you it's the current. So going back to the fluids analogy because these cm/mm waves would normally just shoot up into the ionosphere (water and oil not mixing) they have to be broadcasting them at higher and higher intensities as they increase the speed of the pulses (GHz) we move into a situation where they are literally slowly microwaving the atmosphere. And a lot of these 5G devices broadcast directional waves meaning they can broadcast it directly to you instead of our current system which is omnidirectional. To some it up, Tesla had device which used this sort of thing and it's called the death Ray. One of the initial application of millimeter/ centimeter wave emitting devices that the military(US) used which is the same techonology being used in 5th generation telecommunication broadcasting devices (5G) was for crowd control. Because broadcasting these frequencies at high intensities would literally cause the people to feel as though their skin's on fire because it heats up the water molecules within any living organism which is what microwaves do. The Earth is designed to allow light to reach down to the surface not cm/mm waves.
Sir so the entry level solution for people would be just to hang a huge aluminum screen over their bed and maybe make a structure out of PVC tubing and just ground the screen to a rebar spike in the ground. QUESTION: DOES THE GROUND LEVEL HAVE TO BE ALSO DONE IF YOU ARE ON THE GROUND LEVEL CONCRETE SLAB?
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
Amigo, am I sure glad I subscribed to your channel! I dig the fact that you approach the challenge like a true engineer, obtaining metrics first and then proceeding from an analysis of actual conditions. Diagramming out the existing conditions definitely helps to develop an adequate strategy, as well as visualize the reality prior to shielding. Also, right on for the analysis over time -- A year later meant exponential rise in EMF saturation from without the apartment. I totally agree with you regarding always grounding, given my own experiments and evaluation of the results. Those who advocate not grounding err, in my opinion. A well thought out implementation, and I thank you for sharing this with us all. F.
After 1,120 microwatts is over Level 4 Dangerous level of EMF exposure. You are actually making a safe zone shielding the Electromagnetic frequencies. I recommend watching Ken Wheelers Dangers on 5G video.
I really need advice if you can help to the best of your ability. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps on how to shelid this room. Thank you and God bless 🙏❤️
Thanks for sharing. There are unconstitutional radio wave motion detection devices pointed at my room. It will wake me up at the middle of the night, then a sudden propagation of strong waves would be felt.
Generally for effective RF blocking you actually need multiple layers separated by an insulating material as many signals are designed to penetrate such rooms
dont feed the trolls. i had to move into a 16foot box truck 6 months ago.....i learned to love it and right now im hanging in my hammock listening to the rain typing this . everyone talks shit but i finally have a sense of freedom now that i have nothing. i never let people get to me. i just feel bad for these people that cant find anything better to do with there lives. they weigh down everybody around them down with negativity and regurgitate the crap... thanks for offering somebody help that never asked. your an amazing person.
You mention that there is a computer in the room. Wouldn't the emfs from the computer bounce of the faraday-painted walls and thereby increase the person's exposure to it while it is in use? Or is that only a problem if the curtains are closed and the faraday cage is made complete?
Good question. The reality is that there is no material that will solve your problem. The best materials you can get, will take the pain off for a while but hardly they will improve your situation. Unless you make a really far space between you and the radiofrequencies that are going to hit you. If you want to spend money, try to make a good amount of distance between you and the frequencies. Do not try to just protect yourself, try to make a distance too. This will improve a lot your situation. For example: when you got a faraday cage. Make another faraday cage in the faraday cage... And so on.. This will really improve your situation.
Hello, I have a question - assuming you turn on the lights in the room. Will the Electric field accumulate because there is nowhere for the electrive wave to escape and you're trapping it in the room?
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
I need help!!! I am in a time crunch and doing shielding while my kids are gone for the weekend. Amazon lost my package and I ran out of faraday tape. I have copper tape, aluminum tape, and copper wire with some open grounding plugs. Can anyone suggest what I can do? Could I use the exposed copper wire and just run it along the wall and tape it to the wall using aluminum tape and then find a way to ground it that way? Would that work? I don't have money to get an expert so I'm doing it myself.
I am thinking about doing this to my bedroom with the YShield paint. I was thinking about removing my crown molding painting the entire walls, ceiling, and floor under carpet. I was going to put the ground behind the crown molding, And after it drys paint over it with a preferred color, out of sign out of mind. And find a shielding fabric to shield the windows... But I was wondering if you have a video on grounding electronics.. I plan to go room by room until I have all outter walls of the house,floors, and ceilings shielded. Thanks for sharing your knowledge.
Hello, sir. I am a high tech engineer speciallizing in micro electronics, with an interest in quantum computing and AI research. I am subscribing and I'd really like to learn from youl and hopefully assist in data collection and documenting any discoveries or theries. What tools do you use to take measurements? Also no need to go cold turkey if you hardline a LTE or better access point outside the cage. Perhaps stick to ONE frequency within the domicile? There must be better ways.
I really need advice if you can help to the best of your ability. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps on how to shelid this room. Thank you and God bless 🙏❤️
Having been 'targeted' myself with Directed Energy Weapons, Scalar weapons and goodness knows what other weaponized technology for the past 9 years, I would also be grateful for any information specifically to help shield against such things. Although I guess some of what's mentioned in the video would be worth a try.
I like your design and results. I have a similar emf/rf situation where I live. Ever since this knowledge and technology center was built with a multiband frequency rooftop tower with satcom/telecom/teleconfrence and a radio station all on a 13,000sq. ft. array I can't sleep there, headaches and other issues. So I tried copper mesh but the milimeter wave is small enough to get through. So screening is out unless it's micro holes in the mesh. Now I am using a nickel/copper.
Definatly under us. I've been following a operation in florida connecting all utilities from underground. Organized crime and government working hand in hand
I've been hearing in this is just kind of a question aluminum is a conductor and we also breathe in aluminum and boreum and other metal nanoparticles. Live watched one video where the guy said don't surround everything in the loom. It can help conduct things and make it worse. He said use mylar. Cover everything all the way around your bedroom me roof everything in. Mylar had that will break down the different types of frequencies from passing through your bedroom. Or whatever part of your house. You don't want it like the closest room to the 5G Tower. Is that correct?
@Crisp Muncher lol, you are a moron obviously. Where I'm living right now, Nano rain is happening right outside right now in the sky has a pink Hue to it. When we wake up three or four days out of the week. The whole sky is gray. I hope that you go out and get yourself one of them edumacations! I feel really sorry for you. Why don't you do some research Little Snowflake maybe you'll figure out what's going on.....
you better make sure that seperate ground rod is bonded to the AC supply Ground rod . If You dont you will be inviting high voltages inside where people are due to step potentials,during nearby lightning ground strikes.
QUESTION FOR YOU: Modern Masters has metallic paints that have REAL metal flakes - lots of them - in the paint. The copper paint has so many flakes in it that you can spray vinegar on it when it's wet and it will oxidize to an 'old copper' look. Could I use their metallic line? (I get mine from Artistic Painting Studio there in CA but she ships all over the world.) Could I paint a trim or moulding in their copper paint, and somehow (decoratively) ground it?
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, of there's a little bit of rf for now it's fine but my goal is to jist limit it especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
CAN YOU GIVE US A LIST OF MATERIALS AND THEIR LEVELS OF EFFECTIVENESS? FOR EXAMPLE I WANT TO KNOW IF SHEET METAL WOULD BE MUCH MORE SUPPERIOR THAN SAY THAT ALUMINUM WINDOW SCREEN? WTHAT IS THE LARGERS SIZ SCREEN YOU CAN USE THAT STILL WORKS.
Why would someone want to remove emf and rf for a bedroom? I was just looking into protecting some devices by faraday caging a closet to hold some additional supplies but the concept of doing a whole bedroom seems a bit excessive, right?
Better call Saul: Chuck McGill. They tell you before they do something. They dismiss concerns and problems as 'crazy man is crazy' BEFORE they ever bend you Over ,a
Hi, is your Faraday Cage ground earth common to the building earth? Did you connect the two, and if not, did you have concerns of forsee problems with a potential difference between them?
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
That's a huge increase from 3.6 mW/m2 to 19.1mW/m2 in a year. Did you take photos of the local cell towers and base stations before and after? Could it the case that a load of 4G LTE tech was added to those towers. If so it just goes to show that massive MIMO and other LTE enhancements significantly add to the power density of 4G.
thanks for sharing Michael Neuert, can you please share how to reduce the magnetic fields? What are you views about Magnetic Shielding Flexible Film GIRON and Mumetal to reduce magnetic fields?
The higher frequency RF is not a problem. It's the sub-ghz and I haven't found a way to block it as of yet. I've been asking around, I don't know that blocking out sub-ghz is even possible...
You need to do more research. Higher frequency radiation carries more energy and potentially more harm. Think X-rays or gamma rays from nuclear bombs for some perspective.
Does anyone know about faraday fabric - I bought 6 meters of it but I have no idea how to use it lol. I live in a second story apartment and they JUST this week (I didn't notice it last week, and I was keeping an eye out for new towers since people were saying the COVID-19 quarantine was when the 5G towers were being put up) so I just noticed today and it's HUGE!!! Not a small one, but a gigantic one that has things sticking out in every direction! Ugh! But yeah I'm just learning about al this stuff as well as grounding/earthing - but any info would be greatly appreciated!
@@laurieishii5364 Unfortunately these fabrics are insufficient to block out the 5G signals. If there is indeed one such 5g mast near your room I would certainly say that you would gradually start to experience either frequent headaches, slight muscle twitches and eventually cancer. Only when the mass population start to fall sick and die will proper research be done into High EMF frequencies on humans. Don't be that casualty before that happens.
If I build an off grid cabin without solar or electricity would I still need to ground it ? or would applying the EMF protection paint only be enough ?
Can you talk about how no matter what hotel I switch too the last month its following me even whn im visiting my mom just hanging outside. My bed shaking my body buzzing n vibrating. I hv videos n recording.
Can you help me out? I’d love for you to help me out, can we paint this carbon based paint and then paint over it since it comes out black? Will it loose its purpose?
@Vinod Yes.... I plan to Paint my bedroom with y-shield emf protection paint... and hide the grounding tape under crown molding... and then paint over it with the color I actually want my room to be... And use www.amazon.com/s?k=EMF+SHEILDING+window+film&ref=nb_sb_noss on my windows... I am going to remove my carpet and paid the floor with y-shield as well.... And reinstall the carpet... NO ONE WILL KNOW MY ROOM IS SHIELDED.... I plan to do all my outer walls ... ceiling... and floors as I get money.... I dont have wireless devices in my home so I dont have to deal with that... And I am in a house rather than a apartment so other tenets devices are not an issue.
Thank you for this video. Now I understand the importance of grounding and also getting a better grip on the different types of frequency although I still don't get it 100%. So are there meters that measure all these types of frequency and what meter?
They have emf meters ,dirty electricity meters,rf meters,spectrum analyzers (very expensive but will detect the military weapons attacking you) and gausmeters which detect magnetic waves.Easiest way is to hire an emf specialist to come to your house and advise you.Do your homework to find a competent and accredited individual.
I have the electrical box outside of my home at the head of my bed in the bedroom. Great location - NOT! I'm going to be working on fixing this somehow. The paint Y-sheild is so expensive. I wonder if I can have the electric box moved away from the home?
Picures online, have shown people just put up metal on metal on metal, wood, kind of like a piece of art on the wall above their bed on the wall to help; dont know if it helps thou
So it accumulates electrical wave if you not ground it, it becomes an electric trap instead of a shield? can you make a dumb-basic grounding by piping down a metal rod into the ground soil/concrete? Also would it not be an easy target for thunderbolts in stormy weather if you cover a whole room corner or house itself by outside?
I really need advice if you can help to the best of your ability. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Also will ot become an electrical trap of I don't ground it? Any advice helps on how to shelid this room. Thank you and God bless 🙏❤️
Would living in a camper block RF signals? Thought of this when I read: Greg Benwell commented May 2020, in an earlier commented that they lived in a faraday cage, a 1971 12 x 60 Mobile home with metal exerior.
@EMF Center - with Michael Neuert & Satya Giordano have you measured the impact of disturbing the Magnetic earth field? It is good idea to reduce EMF into your house, but the problem is that you need the magnetic earth field effect in your life. If you modify that, you might be creating some other problems.
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
@@alexzemaitis at risk of sounding dumb, first question is whether you have issues with EMF. Many people do not have, but get into the boat of emf restriction out of missing out. SEcond question is, have you measured with an EMF meter how much you actually get? is it more intense in some areas or directions? I live about 3 blocks away from one and the meter does not detect meaningful signal after 100m away from the tower. Finally, You may want to try by parcels. First try one wall, then next etc, because these stuff is expensive.
Yeah yshield dot com. It works super I sleep so good when I got the fabric called voile and naturell. daylite does not shield as well. for the people who do not believe, ignore them, I sleep so good now and thats proof enough for me.
@Buscheig Brauen hey brother, what's the size of the holes in that foil? where did you get it and any possibility sending me a pic of it if not? or shall i just sit here with a roll and pinprick it myself?
im about to prime the entire inside of my new home. Do you think adding activated charcoal to the primer (then doing another coat of regular primer, then paint.) be good for emf?
Is a wifi router 6 meters bellow me seperated by w cement with iron floors dangerous for me? Like on my samsung S5 phone it shows to be -68 dbm. My first co cencern is that it might bother my sleep and lowers testosterone.please answer.thank you
This radiation is bad because one may not feel anything until it's harmed the body and then it's too late. keep phone on airplane when not using and turn off your wifi at night. note down how you sleep for several days or weeks, then you will know for yourself!
So are you safer in that room during a thunder storm now. Better place for current to travel if room gets stuck but it will be more likely to get hit now.
No, there is grounding. So it goes straight to the ground. Sorta like what you see People who does shows and stand in a Cage and have 20,000 Volts hit their Cage, same principle. NOTE: Without the Ground Wire, YOU WILL BE DEAD!
Thanks for the great videos. I am new to all of this and I am wondering If, putting some grounded aluminum wall around a room or house will help lower emf radiation in the room/house ?
@Vinod Would grounded aluminium screen mesh (is there better kind) on the wall be ok cause I read that foil does not allow the wall to breathe and will eventually degrade ? Appreciate all the knowledge you are sharing and thanks so much ?
@Vinod So do these type of walls absorb or reflect or both the emf signal ? Grounding it just sends the signal back to the earth. I am very new to all of this and just confirming the theory - thanks again for sharing your knowledge.
Life Hacks Tip: Use a dust particulate counter, and notice that the most dirty air in a room is within 1 foot of the floor. Sleeping on the floor is bad, because the air quality is the absolute worst that close to the floor. Move up higher than 24 inches, and the dust load goes down substantially... I'd advise these clients to move their bed off of the floor to get better air quality...
True but many get around that by airing everyday and vacuuming everyday or alternate days for just a couple of minutes.works for asthma patients and all
Safe and Sound PRO II RF Meter 200MHz - 8GHz for emf.The really good meters cost thousands of dollars so you can locate the source and so they can detect more of the frequencies being used.people fail to understand that many of these things are weapons.They have been used that way at least since the 1860's in the United States.
Why didn't you paint before you put the carpet down, then you could have painted down the skirting boards and connected the paint directly onto the floor material? then put the carpet down afterwards?
This worked perfectly! I have almost no radiation in my bedroom anymore. But now my phone does not work in my bedroom, so I installed a WiFi access point in there :)
They probably fell in love with the sunroom after living in it for a while. The sun / increased sun exposure probably caused them to feel better on a seperate path from ef/em shielding
erm..do what i did and just tell the router to shut up wifi wise and only use ethernet? I had to go all the way to my ISP and with a doctor to support me otherwise switching the wifi off was contract breach, that alone told me enough...!!
3 ปีที่แล้ว
@@eezeedoesit, you have the right to switch off your wifi or even router as its sometimes technically needed. Things ISPs say not always are legal.
I live IN a Faraday Cage, and it didn't require much work at all!! My method was simple, I got my hands on a 1971 Parkwood 12 foot by 60 foot mobile home which seemed to "do the trick"!! As it stands I usually have to go outside to even use my cell phone as the skin of the mobile home is all metal, even with the metal roof, and it doesn't seem to allow RF signals into the home!! Heck I can't even listen to a radio inside my home, because there are no radio wave able to get through the skin of the place!!
Ditto I live on a steel boat away from the cities. Only think now I well sensitive and can actually hear some of it when I'm in the city . It got worse lately feel waves of it passing thru at times.
I work and sleep in the aluminum trailers. Inside the trailer at my work I get 7mw/m2 outside 300mw/m2. Trailer is outside away from routers and phones. I leave my phone outside of aluminum trailer. When I get ready to sleep I put my phone into airplane mode also disabling location on it.
I'm able to fall into deep stages of sleep like when I was a kid, I ground myself as well with wire to the ground rod I pounded to the ground. It's the best to use your own ground.
Difference is HUGE with and with out. I was waking up 4-6 times /might before and took some time to fall back into sleep, Everything changed after I start sleeping in the aluminum trailer.
I highly recommend trying it especially if you are straggling getting good night sleep
This is the solution I'm looking for.
Basically any conductive metal will block the signals, even if it has holes in it as long as the holes are small compared to the frequency. That said, radio frequencies are completely harmless and it would be annoying not to have any cell signal in your home. Imagine if there is an emergency you can't even call 911 or if someone is trying to reach you urgently they may not be able to.
@@BoopSnoot "completely harmless"?! Wakeup! Who paid you to say that?
Why do people get their health destroyed by cancer RADIOtherapy then?
I bet you wanted to write "completely harmful"!
Great video! Before becoming a Geovital consultant I was very sick from 23 cell towers 1000 feet from our home. We had moved to a home with a water tower that didnt have towers, as the towers were is=nstalled I became progressively sicker. It got to the point I couldnt work. Anyhow once I got a hold of some good quality meters I realized I needed to do something until we could figure out what to do. My temporary fix was the aluminum screen over a portable greenhouse frame in which I slept in. The meter was reading so high that it blanked out(over 10,000mw2) to 500. Still a lot but a phenomenal difference. Amazon sells the aluminum screen. Be sure it is METAL screen! There is screen that is made of plastic and will do absolutely nothing!
Did you sleep get better
I live half a block from a water tower with General dynamics 5g radios huawei and motorola installed by at and t. I put aluminum window screen under 2/3s of my new roof. Since I don't have a meter I don't know if it reduced the radiation because it was kind of an after thought in the process of roofing but it couldn't have hurt anything!
I have been trying to study this for some time now. I just cannot get it. I'm single and I'm so sick from EMF. I don't even understand the differences between rf, EMF, and microwaves. After all these years I'm feeling discouraged. Right now I'm so weak I can hardly keep myself awake and I just keep on losing weight. I'm disabled already so I'm not able to really afford much. But there is an opening for me in an antique milking parlor with a cement floor and steal siding on one side which is the side the cell towers are on. It has only a small window or two. It seems hopeful. It has to be insulated and wallboard has to be put in and of course flooring. I wonder how you are doing? And if you have any words of Hope or direction for me? Thanks
@@laualee1irmão, não coloque toda esperança nesse mundo caído, depositei sua esperança em Cristo Jesus, só ele é a salvação, busque ele, como se busca um tesouro escondido, peça pra ele te ajudar, orientar, direcionar, e te salvar, ele faz tudo isso...e ainda te recebe nos braços. Pense bem irmão, busque- o diligentemente, e verá a diferença na sua vida!! Seja tu cheio da Graça e conhecimento do Deus vivo!!❤
@@MaryMDias-vf1ey Thank you for writing me. Do you know where I may find an interpreter for your message?
Thank you for the insight. Its absurd how such beautiful homes have to be modified to make a space fit for life. How long can this corporate control and legally making people sick be allowed to go on?
Thank you Michael for what you do and sharing your knowledge, 🇨🇦🙏🏻✌🏻✨
And now you know why they really did away with lead based house paint.
Yeah and Unleaded petrol!!!!
Sea Pilot Shungite.. paint... Blocks the Radiation
I thought that too it was on the Simpsons. A nuclear bomb went of and they was OK and homer said it was all the lead paint. 🤔
@Daryl Halliday if you dont want to be controlled get rid of your cell phone.
Sea Pilot I wonder why he didn’t recommend lead based paint and only graphite based paint?
CFL/LED light bulbs emit RF energy. Strong enough to overpower my local AM radio station from 12 inches away. Old incandescent light bulbs do not make RF. All electronic devices also produce RF, light dimmers, clock radio, computers, fans, etc.
You are saving man kind! Thank you!
You absolutely are AMAZING!
no he's just spreading lies, you don't even know, what he is talking about, and what does it mean
@Tudi Zuno yes i have been well educated and what kind of asumptions are you talking about? he is just spreading lies and thinks this guy is a mesiah, when he actually is just wasting people's time
I really need advice if you can help to the best of your ability. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps on how to shelid this room. Thank you and God bless 🙏❤️
I made a cage for my bed, aluminum mesh screen, double layered on all sides, copper wire connected running into the ground outside. Still get perfect cell service and WiFi signal inside the cage? Any advice?
Did you shield the bottom? That is important. Also, electrical grounding is not necessarily the same as putting a wire in the ground- you would need to use a ground connection on an electrical socket to make it work. Hope it works out well!
I saw similiar materials that ppl import from China and many of them contain nickel. I don't know if this one does, but it is not safe for many people and it is something to take into account. Thank You for the movie, very informative
You always want Silver. I try Nickel and there is a smell to it. With Silver, it's less smells.
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
Tis are present and accounted for!
I use metal mesh trash cans , cheap, to cover all cords, or use as a hamper for live electrical cords, and I use a silver lined blanket to cover my computer base, and i use shielding blankets while in front of t.v, or screens. I hardwired all devices, and dumped my cell phone, for a corded phone. no wireless in my life, and i sleep at night, have no skin rashes, and less anger /moodiness. I also use stetzer filters on each outlet.
Are you supposed to put them in each outlet.? Do you have any links or info?
Thank you. This is truly life changing information. Exactly what I was looking for.
@The General ?? Is he telling thr Truth?
@The General... Would you care to say, why you have written this please.
@The General I don't think who posted this is crazy at all. If you think that converting parts or your entire home into a proper Faraday cage is crazy then we disagree. People criticizing this video asking for this person to give away their business for free by showing their tools and procedures which is funny to me because if you understand electricity all this stuff is basic knowledge. Someone that sees this video and chooses to bash it, in my simple mind I see that they are blinded by their privilege wanting things handed to them instead of seeking it out on their own. Talk to any field electrical engineer and they'll quickly see the obvious legitimacy and profitability of doing this as a business.
@The General In electricity there two fundamental concepts that in my opinion explain the danger of cm/mm waves.. These are the concepts of voltage and and current. Think of voltage like water pressure and current can be compared to the volume of water flowing. Now with those two concepts in mind let's also use the analogy of mixing fluids. If you mix water with another water like liquid they will mix seamlessly. However if you try to make water and oil no matter how much you stirr it, mix it, shake it, no matter how much it appears for a moment that it is mixed once settled they will separate. Now look at water as our atmosphere on the surface of Earth and centimeter/millimeter waves as the oil. These two things will not mix. And any type of centimeter or millimeter wave emission will always be pushed up into the ionosphere. So in order to keep these emissions down in the troposphere they have to be broadcast it at high intensity (high voltage and current) so they can go over a certain distance before being pulled up into the ionosphere. Everything is electiricty. Radiowaves are no different than the electricity going through a wire. It's the intensity and amplitude that changes how it behaves and what we call it and as any electrician will tell you it's not the voltage the kills you it's the current. So going back to the fluids analogy because these cm/mm waves would normally just shoot up into the ionosphere (water and oil not mixing) they have to be broadcasting them at higher and higher intensities as they increase the speed of the pulses (GHz) we move into a situation where they are literally slowly microwaving the atmosphere. And a lot of these 5G devices broadcast directional waves meaning they can broadcast it directly to you instead of our current system which is omnidirectional. To some it up, Tesla had device which used this sort of thing and it's called the death Ray. One of the initial application of millimeter/ centimeter wave emitting devices that the military(US) used which is the same techonology being used in 5th generation telecommunication broadcasting devices (5G) was for crowd control. Because broadcasting these frequencies at high intensities would literally cause the people to feel as though their skin's on fire because it heats up the water molecules within any living organism which is what microwaves do. The Earth is designed to allow light to reach down to the surface not cm/mm waves.
Wait to you get the bill. That will be truly life changing.
Sir so the entry level solution for people would be just to hang a huge aluminum screen over their bed and maybe make a structure out of PVC tubing and just ground the screen to a rebar spike in the ground. QUESTION: DOES THE GROUND LEVEL HAVE TO BE ALSO DONE IF YOU ARE ON THE GROUND LEVEL CONCRETE SLAB?
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
Amigo, am I sure glad I subscribed to your channel!
I dig the fact that you approach the challenge like a true engineer, obtaining metrics first and then proceeding from an analysis of actual conditions. Diagramming out the existing conditions definitely helps to develop an adequate strategy, as well as visualize the reality prior to shielding. Also, right on for the analysis over time -- A year later meant exponential rise in EMF saturation from without the apartment. I totally agree with you regarding always grounding, given my own experiments and evaluation of the results. Those who advocate not grounding err, in my opinion.
A well thought out implementation, and I thank you for sharing this with us all.
F.
How's the humidity levels in the air/walls?
Mould growth, corrosion between different materials?
After 1,120 microwatts is over Level 4 Dangerous level of EMF exposure. You are actually making a safe zone shielding the Electromagnetic frequencies. I recommend watching Ken Wheelers Dangers on 5G video.
I really need advice if you can help to the best of your ability. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps on how to shelid this room. Thank you and God bless 🙏❤️
Thanks for sharing. There are unconstitutional radio wave motion detection devices pointed at my room. It will wake me up at the middle of the night, then a sudden propagation of strong waves would be felt.
This video is like unintentional ASMR. Such a soothing voice. Like butta!
Generally for effective RF blocking you actually need multiple layers separated by an insulating material as many signals are designed to penetrate such rooms
Thankyou so much for sharing this! I just grounded my foil panel for blocking rf through my bedroom wall, sooo much better. :)
If you are building a house from scratch, do you have any suggestions here to make the shell of the house a good barrier to RF?
A company in Rhode Island is selling faraday cage shielded wall paper.
Thank you. Professor. God bless you.
he is not a professor, otherwise he would know something about it
Great video. Thank you for the new ideas and insights!
I can hardly afford my groceries, possible to do this diy on a barely budget? Thanks. It's so important.
@Tian Vermonntemg why'd you ask him that?
Tian Vermonntemg what do you think, genius?
LOL, SIMP!
@Tian Vermonntemg your a good person thank you. dont argue with morons your giving them something they want.......
dont feed the trolls. i had to move into a 16foot box truck 6 months ago.....i learned to love it and right now im hanging in my hammock listening to the rain typing this . everyone talks shit but i finally have a sense of freedom now that i have nothing. i never let people get to me. i just feel bad for these people that cant find anything better to do with there lives. they weigh down everybody around them down with negativity and regurgitate the crap... thanks for offering somebody help that never asked. your an amazing person.
I would have used the aluminum screen on the floor with laminate floor underlayment material.A lot less expensive than taffeta
Hmmmm that sounds like a great idea!
Great video. What did you use for measuring RF signal's power?
I'd also like to know.
You mention that there is a computer in the room. Wouldn't the emfs from the computer bounce of the faraday-painted walls and thereby increase the person's exposure to it while it is in use? Or is that only a problem if the curtains are closed and the faraday cage is made complete?
What about psychotronic weapons and voice 2 skull
Good question. The reality is that there is no material that will solve your problem. The best materials you can get, will take the pain off for a while but hardly they will improve your situation. Unless you make a really far space between you and the radiofrequencies that are going to hit you. If you want to spend money, try to make a good amount of distance between you and the frequencies. Do not try to just protect yourself, try to make a distance too. This will improve a lot your situation.
For example: when you got a faraday cage. Make another faraday cage in the faraday cage... And so on.. This will really improve your situation.
I cap lined with foil , shiny side out
Hello, I have a question - assuming you turn on the lights in the room. Will the Electric field accumulate because there is nowhere for the electrive wave to escape and you're trapping it in the room?
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
Did the clients note improvements or a sense of improved well b being?
Hahahaha!
I need help!!! I am in a time crunch and doing shielding while my kids are gone for the weekend. Amazon lost my package and I ran out of faraday tape. I have copper tape, aluminum tape, and copper wire with some open grounding plugs. Can anyone suggest what I can do? Could I use the exposed copper wire and just run it along the wall and tape it to the wall using aluminum tape and then find a way to ground it that way? Would that work? I don't have money to get an expert so I'm doing it myself.
What do you think about pink salt lamps. If your heating them by electricity seems ironic.
I am thinking about doing this to my bedroom with the YShield paint.
I was thinking about removing my crown molding painting the entire
walls, ceiling, and floor under carpet.
I was going to put the ground behind the crown molding,
And after it drys paint over it with a preferred color, out of sign out of mind.
And find a shielding fabric to shield the windows...
But I was wondering if you have a video on grounding electronics..
I plan to go room by room until I have all outter walls of the house,floors, and ceilings shielded.
Thanks for sharing your knowledge.
Which is the first step on evaluating how much intensity of radiation we have at home and at workplace?
Which is a good meter to buy?
Hello, sir. I am a high tech engineer speciallizing in micro electronics, with an interest in quantum computing and AI research. I am subscribing and I'd really like to learn from youl and hopefully assist in data collection and documenting any discoveries or theries. What tools do you use to take measurements? Also no need to go cold turkey if you hardline a LTE or better access point outside the cage. Perhaps stick to ONE frequency within the domicile? There must be better ways.
I really need advice if you can help to the best of your ability. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps on how to shelid this room. Thank you and God bless 🙏❤️
Do you have any recommendations for people who are being targeted?
Having been 'targeted' myself with Directed Energy Weapons, Scalar weapons and goodness knows what other weaponized technology for the past 9 years, I would also be grateful for any information specifically to help shield against such things. Although I guess some of what's mentioned in the video would be worth a try.
What do You say about Nano Tec. and what do You do to get rid of it to shield Your biofield?
Is it possible to wrap the outside of a house to reduce rf? If it is a one-story house, do you need to shield the floor?
I like your design and results. I have a similar emf/rf situation where I live. Ever since this knowledge and technology center was built with a multiband frequency rooftop tower with satcom/telecom/teleconfrence and a radio station all on a 13,000sq. ft. array I can't sleep there, headaches and other issues. So I tried copper mesh but the milimeter wave is small enough to get through. So screening is out unless it's micro holes in the mesh. Now I am using a nickel/copper.
if that is so im going under the house here, ill start digging tomorrow!! ;[
Try multiple layers
Definatly under us. I've been following a operation in florida connecting all utilities from underground. Organized crime and government working hand in hand
Good video thanx. How do you convert V/m (volts/meter) to uW/m/squared (micro watts/meter squared).?
I've been hearing in this is just kind of a question aluminum is a conductor and we also breathe in aluminum and boreum and other metal nanoparticles. Live watched one video where the guy said don't surround everything in the loom. It can help conduct things and make it worse. He said use mylar. Cover everything all the way around your bedroom me roof everything in. Mylar had that will break down the different types of frequencies from passing through your bedroom. Or whatever part of your house. You don't want it like the closest room to the 5G Tower. Is that correct?
@Crisp Muncher lol, you are a moron obviously. Where I'm living right now, Nano rain is happening right outside right now in the sky has a pink Hue to it. When we wake up three or four days out of the week. The whole sky is gray. I hope that you go out and get yourself one of them edumacations! I feel really sorry for you. Why don't you do some research Little Snowflake maybe you'll figure out what's going on.....
I do t think Mylar works
@@Bigbaz-bj8io yes ,I believe that can be woven in the as well.
@@Bigbaz-bj8io there's a graphite paint to i think. I don't know how gaphite is for humans even tho we are all carbon. lol
you better make sure that seperate ground rod is bonded to the AC supply Ground rod . If You dont you will be inviting high voltages inside where people are due to step potentials,during nearby lightning ground strikes.
very interesting. i will have to budget for this thanks.
OH YEAH BABY
bruh, ur supporting their moneymaking bullshit
Sir, I am chipped in my body, cau you give idea, how can break or defunct the chip , using electro magnetic pulser , how can do it
Great job sir.
Lil' tip for you: put the link of your website in the description, people are lazy so the link will bring more traffic.
Thank you sir.
The man did not blink, at all!
Why aren't people painting the Back of headboards? When you move, the safety feature goes with you. Or, the nightkerchief may come back,too.
QUESTION FOR YOU: Modern Masters has metallic paints that have REAL metal flakes - lots of them - in the paint. The copper paint has so many flakes in it that you can spray vinegar on it when it's wet and it will oxidize to an 'old copper' look. Could I use their metallic line? (I get mine from Artistic Painting Studio there in CA but she ships all over the world.) Could I paint a trim or moulding in their copper paint, and somehow (decoratively) ground it?
This is an excellent question! Also copper tape as a molding trim
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, of there's a little bit of rf for now it's fine but my goal is to jist limit it especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
Hello! The all wifi should be completely removed? And only wiring. What about the mobiles? iPads, laptops? Thank you in advance!
CAN YOU GIVE US A LIST OF MATERIALS AND THEIR LEVELS OF EFFECTIVENESS? FOR EXAMPLE I WANT TO KNOW IF SHEET METAL WOULD BE MUCH MORE SUPPERIOR THAN SAY THAT ALUMINUM WINDOW SCREEN? WTHAT IS THE LARGERS SIZ SCREEN YOU CAN USE THAT STILL WORKS.
Chinese students put aluminium foil on their windows back in early 80's.............
Before they died in the square.
Why would someone want to remove emf and rf for a bedroom? I was just looking into protecting some devices by faraday caging a closet to hold some additional supplies but the concept of doing a whole bedroom seems a bit excessive, right?
Better call Saul: Chuck McGill.
They tell you before they do something.
They dismiss concerns and problems as 'crazy man is crazy' BEFORE they ever bend you Over ,a
Can you please do foot notes for materials in the links. TY professor
Hi, Michael! Can You describe material composition under carpet? 28% of copper will be also enaugh? Thanks!
Hi, is your Faraday Cage ground earth common to the building earth? Did you connect the two, and if not, did you have concerns of forsee problems with a potential difference between them?
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
That's a huge increase from 3.6 mW/m2 to 19.1mW/m2 in a year. Did you take photos of the local cell towers and base stations before and after? Could it the case that a load of 4G LTE tech was added to those towers. If so it just goes to show that massive MIMO and other LTE enhancements significantly add to the power density of 4G.
That is exactly why it was done.It is a kill weapon and they do not want us to get it.it mimics virus symptoms and no one looks for it.
thanks for sharing Michael Neuert, can you please share how to reduce the magnetic fields? What are you views about Magnetic Shielding Flexible Film GIRON and Mumetal to reduce magnetic fields?
Thanks for the great video!
@Michael Neuert Could you do a Wifi 5ghz shielding video for us who live in apartments? It is difficult to block these higher frequency RF.
The higher frequency RF is not a problem. It's the sub-ghz and I haven't found a way to block it as of yet. I've been asking around, I don't know that blocking out sub-ghz is even possible...
You need to do more research. Higher frequency radiation carries more energy and potentially more harm. Think X-rays or gamma rays from nuclear bombs for some perspective.
Does anyone know about faraday fabric - I bought 6 meters of it but I have no idea how to use it lol. I live in a second story apartment and they JUST this week (I didn't notice it last week, and I was keeping an eye out for new towers since people were saying the COVID-19 quarantine was when the 5G towers were being put up) so I just noticed today and it's HUGE!!! Not a small one, but a gigantic one that has things sticking out in every direction! Ugh! But yeah I'm just learning about al this stuff as well as grounding/earthing - but any info would be greatly appreciated!
@@laurieishii5364 Unfortunately these fabrics are insufficient to block out the 5G signals. If there is indeed one such 5g mast near your room I would certainly say that you would gradually start to experience either frequent headaches, slight muscle twitches and eventually cancer.
Only when the mass population start to fall sick and die will proper research be done into High EMF frequencies on humans. Don't be that casualty before that happens.
@@laurieishii5364 o you need to move in with me. Get away from towers
If I build an off grid cabin without solar or electricity would I still need to ground it ? or would applying the EMF protection paint only be enough ?
Legend - thank you
Good Information!! Thank You!
Can you talk about how no matter what hotel I switch too the last month its following me even whn im visiting my mom just hanging outside. My bed shaking my body buzzing n vibrating. I hv videos n recording.
Can you help me out? I’d love for you to help me out, can we paint this carbon based paint and then paint over it since it comes out black? Will it loose its purpose?
@Vinod
Yes....
I plan to Paint my bedroom with y-shield emf protection paint... and hide the grounding tape under crown molding... and then paint over it with the color I actually want my room to be...
And use www.amazon.com/s?k=EMF+SHEILDING+window+film&ref=nb_sb_noss
on my windows...
I am going to remove my carpet and paid the floor with y-shield as well.... And reinstall the carpet...
NO ONE WILL KNOW MY ROOM IS SHIELDED....
I plan to do all my outer walls ... ceiling... and floors as I get money....
I dont have wireless devices in my home so I dont have to deal with that... And I am in a house rather than a apartment so other tenets devices are not an issue.
this level of stupid Is getting unbereable
@@mssburr Hows it working any effect ?
What shielding effectiveness did this space get when you tested it per MIL-STD-285, IEEE-299 or NSA-94-106?
Thank you for this video. Now I understand the importance of grounding and also getting a better grip on the different types of frequency although I still don't get it 100%. So are there meters that measure all these types of frequency and what meter?
They have emf meters ,dirty electricity meters,rf meters,spectrum analyzers (very expensive but will detect the military weapons attacking you) and gausmeters which detect magnetic waves.Easiest way is to hire an emf specialist to come to your house and advise you.Do your homework to find a competent and accredited individual.
Is there a demand for contractors doing this
Thank you. Great information.
Great video, subbed
As u may know..a stuck house has metal screen under the stuckoo.does this act as a barrier for unwanted frequencies and EMF
Yes for lower frequencies. the higher the frequency the smaller hole in the screen you need. Stuko screen has large holes
I have the electrical box outside of my home at the head of my bed in the bedroom. Great location - NOT! I'm going to be working on fixing this somehow. The paint Y-sheild is so expensive. I wonder if I can have the electric box moved away from the home?
Picures online, have shown people just put up metal on metal on metal, wood, kind of like a piece of art on the wall above their bed on the wall to help; dont know if it helps thou
So it accumulates electrical wave if you not ground it, it becomes an electric trap instead of a shield?
can you make a dumb-basic grounding by piping down a metal rod into the ground soil/concrete?
Also would it not be an easy target for thunderbolts in stormy weather if you cover a whole room corner or house itself by outside?
I really need advice if you can help to the best of your ability. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Also will ot become an electrical trap of I don't ground it? Any advice helps on how to shelid this room. Thank you and God bless 🙏❤️
Would living in a camper block RF signals? Thought of this when I read: Greg Benwell commented May 2020, in an earlier commented that they lived in a faraday cage, a 1971 12 x 60 Mobile home with metal exerior.
Does turning off dedicated router and separate modem use count as elimination of "wireless" devices? Or copper shielding over them?
Where do you get cooper fabric?
Which EMF tester on the market or amazon do you recommend ?
@EMF Center - with Michael Neuert & Satya Giordano have you measured the impact of disturbing the Magnetic earth field?
It is good idea to reduce EMF into your house, but the problem is that you need the magnetic earth field effect in your life. If you modify
that, you might be creating some other problems.
You may want to consider window films for emf instead of the aluminum screens you installed.
Window films and aluminum screens.
I really need advice. I currently live in a motel room with a kitchennet and there is a 5g tower 4 blocks away in one direction and 1 mile in another direction. I want to sheild my room from emfs using reflectix, aluminum window screen and galvanized steel but I need advice on how to do it safley without making emfs worse. Should I put it on every single wall from floor to ceiling or just the 2 walls that the 5g is coming from? Also since I live in this room if I'm on my laptop or using my phone which i usually am in the room will it make it dangerous and start ping ponging around the room? Will I still be able to use electronics in the room without it being dangerous? I basically want to limit emf exposure as much as possible especially the 5g is the main concern, if there's a little bit of rf for now it's fine but my goal is to just limit emf as much as possible especially from the outside but I want to do it safely because there will still be electronics being used in the room until night time. Would it be best to just do like 2 or 3 sides of the room or even a faraday cage section of the room separate? Any advice helps thank you and God bless 🙏❤️
@@alexzemaitis at risk of sounding dumb, first question is whether you have issues with EMF. Many people do not have, but get into the boat of emf restriction out of missing out. SEcond question is, have you measured with an EMF meter how much you actually get? is it more intense in some areas or directions? I live about 3 blocks away from one and the meter does not detect meaningful signal after 100m away from the tower. Finally, You may want to try by parcels. First try one wall, then next etc, because these stuff is expensive.
Do you have links for where you purchase the daylite fabric, etc?
i hope not, it is a scam, please don't buy it, im trying to save your money
Yeah yshield dot com. It works super I sleep so good when I got the fabric called voile and naturell. daylite does not shield as well. for the people who do not believe, ignore them, I sleep so good now and thats proof enough for me.
@@RepublicOfCatyes that's a perfect example of placebo
Will aluminum screen work to shield ? Or what type of material do you need to use?
Aluminum foil works fine
Would sheet metal added to fencing around the home reduce EMF and RF from coming into the home?
@Buscheig Brauen hey brother, what's the size of the holes in that foil? where did you get it and any possibility sending me a pic of it if not? or shall i just sit here with a roll and pinprick it myself?
@@eezeedoesitI notice Reynolds’s wrap in precut squares has those tiny holes in it as I covered a lot area and noticed it.
im about to prime the entire inside of my new home. Do you think adding activated charcoal to the primer (then doing another coat of regular primer, then paint.) be good for emf?
Buy shungite powder.
@@schurr64 for what
hows it working, any effect?
Does emf clothing work if you can't ground the clothing?
use a fabric with high resistance, not the conductive stuff, or you'll pick up E fields like a magnet!
@@RepublicOfCatyes uh, E-fields? what Is this nonsense, it just Is harmless, stop it
@@suqma For you, I recommend electric fence therapy
@@RepublicOfCatyes lmao, same for you m8, but maybe pick the big energy lines, if you say this to people :)
@@suqma Oh, turns out you are so sensitive, and here you are making fun of sensitive people. Funny ain't it.
Is a wifi router 6 meters bellow me seperated by w cement with iron floors dangerous for me? Like on my samsung S5 phone it shows to be -68 dbm. My first co cencern is that it might bother my sleep and lowers testosterone.please answer.thank you
This radiation is bad because one may not feel anything until it's harmed the body and then it's too late. keep phone on airplane when not using and turn off your wifi at night. note down how you sleep for several days or weeks, then you will know for yourself!
very good video
Aluminum screened in porch all the way around the house. Maybe it would work.
My dog likes to stracth the sheet rock around outlets in the house.does this mean EMF is to high.
Hi, Michael. How much such room can coast for a bedroom and computer corner?
So are you safer in that room during a thunder storm now. Better place for current to travel if room gets stuck but it will be more likely to get hit now.
No, there is grounding. So it goes straight to the ground. Sorta like what you see People who does shows and stand in a Cage and have 20,000 Volts hit their Cage, same principle. NOTE: Without the Ground Wire, YOU WILL BE DEAD!
Thanks for the great videos. I am new to all of this and I am wondering If, putting some grounded aluminum wall around a room or house will help lower emf radiation in the room/house ?
@Vinod Thanks and what do you mean by "be careful" ? Also, would aluminum mesh be preferred over foil ? Thanks
@Vinod Would grounded aluminium screen mesh (is there better kind) on the wall be ok cause I read that foil does not allow the wall to breathe and will eventually degrade ? Appreciate all the knowledge you are sharing and thanks so much ?
@Vinod So do these type of walls absorb or reflect or both the emf signal ? Grounding it just sends the signal back to the earth. I am very new to all of this and just confirming the theory - thanks again for sharing your knowledge.
@Vinod So, grounding the surface is what allows it "absorb" or disperse the emf to ground instead of scattering it ? Thanks again !!!!
@Vinod All the best to you as well and looking forward to more of your videos !
Life Hacks Tip: Use a dust particulate counter, and notice that the most dirty air in a room is within 1 foot of the floor. Sleeping on the floor is bad, because the air quality is the absolute worst that close to the floor. Move up higher than 24 inches, and the dust load goes down substantially... I'd advise these clients to move their bed off of the floor to get better air quality...
True but many get around that by airing everyday and vacuuming everyday or alternate days for just a couple of minutes.works for asthma patients and all
My water line was emitting 241,000 mW/m2. It was outrageous.
can you show what the end of the grounding wire looks like?
Hello. Thank you for this vital information. Which emf, rf and electric field meter you would recommend me to buy?
Safe and Sound PRO II RF Meter 200MHz - 8GHz for emf.The really good meters cost thousands of dollars so you can locate the source and so they can detect more of the frequencies being used.people fail to understand that many of these things are weapons.They have been used that way at least since the 1860's in the United States.
Why didn't you paint before you put the carpet down, then you could have painted down the skirting boards and connected the paint directly onto the floor material? then put the carpet down afterwards?
This worked perfectly! I have almost no radiation in my bedroom anymore. But now my phone does not work in my bedroom, so I installed a WiFi access point in there :)
But this guy says to *remove* all Wifi and Hotspot devices and to use only *wired* connections.
Lol bud, ur a genius. You went through the trouble of getting rid of radio waves to than installing a radio transmitter. Genius.
U don't need anything like that in Ur safe spot...jump of of everything and get U anyway...WHY
😆
seems to me that isolating the original master bedroom, would have been so much easier...
They probably fell in love with the sunroom after living in it for a while.
The sun / increased sun exposure probably caused them to feel better on a seperate path from ef/em shielding
if i want to put a box around a router - do i need grounding? their frequencies are 2.4-4.8ghz - is that what you consider low..?
If you just want to block radio frequencies then it is not required to ground it.
erm..do what i did and just tell the router to shut up wifi wise and only use ethernet? I had to go all the way to my ISP and with a doctor to support me otherwise switching the wifi off was contract breach, that alone told me enough...!!
@@eezeedoesit, you have the right to switch off your wifi or even router as its sometimes technically needed. Things ISPs say not always are legal.
do you have to shield the floor if my bedroom is on ground level concrete pad???
Most likely no. RF frequencies come from above-ground sources.