I have a 2000 G20. You're dope! This helps so much! Hopefully I have no other issues than just my power steering. This is definitely going to save me money! Can't wait to finally fix my baby! Thank you!
Thanks SO MUCH FOR THE VIDEO. WITH THIS and a little more research I replaced my power steering high pressure hose. You also need the correct washers, 4 just for the power steering hose. I saved a ton of money and invented something in the process. So I can't thank you enough!!!! This video was my main help. BTW, this is not an easy repair you should have a lot of tools for this.
Thanks! Watched the full video. I'm going to try to replace the hose and see how that works...if it keeps leaking I'm just gonna pay my friend. Great things about videos like these are they show me the extent of the labor. Thank ya so much for the video.
I really appreciate this video. It was the only one we could find that helped. We got everything on okay, no leaks but still not working. There's a chance we might have reversed those two little lines held on with hose clamps. Does it matter if we did? Don't know if you're still around but, again, thanks for the video.
I'm curious around 7:50 where you are tightening the adjuster bolt for PS bracket...did you loosen the what you call the stud for the tensioner beforehand? I am having trouble & going righty for loosey for belt seems to make the belt tighter?
make sure that the bolt on the side is loosened than try to remove tension. i had a hard time with mine to it could be that over time it got stuck hit it with a hammer to try to break it loose
@@ERICSDIYGARAGE Thanks, I got the stud for the tensioner (goes through "block") loose at the beginning & was able to move the adjustment bolt which also goes through the "block". Things were turning, but nothing was moving. Ultimately, I had to break the pivot bolt with head near the oil filter loose. Once that happened, things moved & the belt finally loosened. Thanks again for your reply!
That pump looks way easier than the earlier SR20 where the oil filter housing is right above the power steering pump. On my AWD P10 Primera, I can barely see it from underneath.
I am trying to change the PS belt o. My Infiniti g20. I keep tightening the fastener all in but it did not by release the pressure off the belt. Help please..
I'm putting 02 Infiniti G20 back together after 3 years. This video helped me to put the bracket back together. At the moment install . Lol
I have a 2000 G20. You're dope! This helps so much! Hopefully I have no other issues than just my power steering. This is definitely going to save me money! Can't wait to finally fix my baby! Thank you!
+Jomarie Militante Glad im able to help you thank you for watching!
I recently got a 2000 g20 and while I don't need to replace my power steering hose I do certainly appreciate your videos! thank you!
Crimson Markasaur thank you!
Thanks SO MUCH FOR THE VIDEO. WITH THIS and a little more research I replaced my power steering high pressure hose. You also need the correct washers, 4 just for the power steering hose. I saved a ton of money and invented something in the process. So I can't thank you enough!!!! This video was my main help. BTW, this is not an easy repair you should have a lot of tools for this.
Any chance you still know the part number for the HPPS hose??
Thanks! Watched the full video. I'm going to try to replace the hose and see how that works...if it keeps leaking I'm just gonna pay my friend. Great things about videos like these are they show me the extent of the labor. Thank ya so much for the video.
I really appreciate this video. It was the only one we could find that helped. We got everything on okay, no leaks but still not working. There's a chance we might have reversed those two little lines held on with hose clamps. Does it matter if we did? Don't know if you're still around but, again, thanks for the video.
Needed this video have a lil leak and it was red fluid I'm glad it's not transmission fluid but a power sterring leak
I think I’m finally doing this job tomorrow, I don’t know if it’s the pump or line but I got the pump and gonna give it a try...😅
Good luck! Let me know if you need any help 👍
I appreciate you making these videos man.gracias
Thank you for watching👍
I'm curious around 7:50 where you are tightening the adjuster bolt for PS bracket...did you loosen the what you call the stud for the tensioner beforehand? I am having trouble & going righty for loosey for belt seems to make the belt tighter?
make sure that the bolt on the side is loosened than try to remove tension. i had a hard time with mine to it could be that over time it got stuck hit it with a hammer to try to break it loose
@@ERICSDIYGARAGE Thanks, I got the stud for the tensioner (goes through "block") loose at the beginning & was able to move the adjustment bolt which also goes through the "block". Things were turning, but nothing was moving. Ultimately, I had to break the pivot bolt with head near the oil filter loose. Once that happened, things moved & the belt finally loosened. Thanks again for your reply!
What size is the stud he takes out and shows us
That pump looks way easier than the earlier SR20 where the oil filter housing is right above the power steering pump. On my AWD P10 Primera, I can barely see it from underneath.
A year late reply sorry but I need info about that car. I've looked very little about them. What's the official name for that version of the p10?
You should make a video showing how you installed the air filter/intake
Thank for your comment im working on making a custom intake that hopefully everyone can use
Is this the same for a 05 3.5 Altima?
Its very similar but the size of the bolts might be different
@@ERICSDIYGARAGE seems like i remember u sent me a link to a video of this job on my exact car.. maybe not but if u know of one please let me know lol
I have a 1992 sr18 Nissan bluebird sss power steering rack is liking.
God damn, gotta do mines as well
its definitely not my favorite repair lol
What size socket I need for the bottom stud?
Michael Mcclanahan the one hold the power steering pump?
ERICSDIYGARAGE yeah the long one on the bottom
Michael Mcclanahan its a 14mm
I am trying to change the PS belt o. My Infiniti g20. I keep tightening the fastener all in but it did not by release the pressure off the belt. Help please..
+Ardit Agolli break the bottom power steering bolt that holds the bottom side of the pump
ERICSDIYGARAGE
Are you talking about the bolt at 08:20 ?
Thanks
Ardit Agolli yes correct
Video wont run for me....is it down?
no I haven't taken it down
Anyone else not able to view the video?
sorry your experiencing this issue I'm not sure how it can be fixed