Removing the engine from my Classic Mini
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Whilst ive been away this week my excellent mechanic has been working on the classic mini. The engine is out, and the crank has been removed!
New parts are ordered, and we'll also be discussing what we can do to improve the interior, as well as having a look at the seats I purchased from Mand Mclassic mini spares.
Let me know what you think and don't forget to subscribe!
Somehow, I managed to miss the last 30 seconds of my own video! You know what's coming. Like and subscribe ❤😊
Replace the motor mounts and all of the rubber bushes - cheap as and easy to do. Maybe new earth strap too - may help elec issues. Someone has had a play with the hoses as you have silicone - bonus. Radiator looks iffy esp given the rusty water evidence. Thermostat replace at the same time cant hurt. There will always be a list of things to do - joy of a classic old car! ;-)
The thing with minis is it is a car you will always be working on and this is from years of ownership. They are awesome cars but like a small child require lots of attention 😂 in saying that they are a car that will pay you back with miles of fun and laughs. Mini shows are a must and a great source of advice and inspiration for your own mini.
Yea I have to say for the whole twenty miles I've driven the car I've loved it 😂
😂 20s better than none. Looking forward to the future vids.
The crank issue I think was just bad luck. I don’t think the seller could have predicted that and no inspection would have picked it up in my opinion. Happy to be corrected.
Change the tie bar rubbers. Can get more firm ones to reduce engine rocking if you wish.
Don’t beat yourself up, nobody would have spotted that clutch. The rusty marks on the subframe/rad is that it has been over heating - causes are - the rad’s knackered, thermostats knackered, water pumps knackered or possibly engine issues. I would 100% change the thermostat and uprate the water pump. Probably change or flush the rad. Whilst out, change crank seal, gear selector seal, maybe driveshaft oil seal. Basically if it’s leaking oil, change the nearest seal. 👍
Legend. Thanks buddy. 😊
The rusty water is just sand from when the engine block was cast, you will find that on pretty much every steel block engines, nothing to stress about 👍
That's good to know. Think I'll definitely give it a flush.
With a old mini it's always I step forward 2 steps back . The day you think its perfect. It will let you down
I'm happy with that ratio. I'd just like to stop moonwalking backwards 😂
great video mate agreed got to keep pushing forward
Thanks mate. Yea parts should be ordered this week. Few things to get done in the Defenders then time to get this on the road.
Get some straight cut drop gears on it while it’s out 😂
and loss your hearing .....
Yes! A very evocative sound of the 60s racing heyday! I always regretted not getting them fitted to my 1380cc Swiftune lump with JKD 5 speed straight cut box…
Unless you have hydrolic suspension it is far easier to remove the whole front end, complete with engine, gearbox and radiator. It is also much easier to re assemble the whole thing out of the car. There is also far less chance of scratching or damaging anything in the process.
Hadn't even though of that as an option Bruce. Will definitely keep that in mind.
My dads got a 73 mini in the same colour, never seen another painted the same. Do u know the paint code for it 😂
@@MarkHoughton-qi3st I think i actualy do. Its a skoda colour. Got a can of it in the workshop somewhere.
I'm just looking at 3d printing now 😁 I need to get two old 90s tsw alloy wheel centres made up
I've got a Bamburgh lab. Brilliant bit of.kit.
That rusty look appears that the previous owner must have been running water and not coolant...Should to a Red rebuild/ replacement..
Good to know. Worth running evaporust or coolant cleaner through the system?
@@MrJoshuaSivarajah yes I Would thinka flush of the cooling system when you get it back together..🤔🤔
I think the end of your video is missing, it ends with ‘I’ve gone out and bought the mini workshop manual’ then stops abruptly?😮
Yea I messed the transfer up 😂
Got a classic mini on west coast of Scotland as well, bought site unseen. Engine and gearbox been perfect for me, the body work not as great. Time to learn to weld for me 😂😂
Although the weather's been that bad here its only been out once this year.
Yea I feel your pain Paul. Although I've just woke up to sunshine. Time to get some jobs crossed off that list.
@@MrJoshuaSivarajah aye, no doubt it'll be back to rain tomorrow. You'll love the roads in the mini up the west coast and Highlands, brilliant for such a wee car.
While the engine out!!!! All mounts balljoints etc a must save loads of foal language 😂😂😂😂😂
Good to know. I'll get them ordered!
That engine mount problem wasn't the mechanic's fault, yet another bit of crap design, happens to most of them eventually...
I am going deaf in my left ear.