Pretty nicely explained, though it's dangerous to lead people to think that level is correct. Sure you can adjust a laser level to be parallel with body lines, but the average viewer won't know that you meant that. Lining up graphics on a vehicle can be simple, but more often than not, it's the difference between a professional looking job and a poorly installed decal. But I don't mean to be negative. Honestly it's one of the best explanations of the center hinge technique I've seen on TH-cam. I'm sharing it with my brother-in-law who purchased some decals from me.
Hi Tony, In this application we used a self leveling green laser to set our level line. Stabilo chalk pencils are typically our go to for quick registration points.
Is there a preferred temp to make sure the graphic will stick properly, I have to do this outdoors? It felt like summer last week but today feels like winter lol.
I'm surprised a video had to be made to do this job of installing a decal. I did this in early '70's and it seems and looks like nothings changed so far
![กี่หมื่นฟ้า | Your Sky Series EP.1 [1/4]](http://i.ytimg.com/vi/vLGjxFL6U_I/mqdefault.jpg)
By far, THE best and most straightforward instruction. Thank you for your time.
Pretty nicely explained, though it's dangerous to lead people to think that level is correct. Sure you can adjust a laser level to be parallel with body lines, but the average viewer won't know that you meant that. Lining up graphics on a vehicle can be simple, but more often than not, it's the difference between a professional looking job and a poorly installed decal.
But I don't mean to be negative. Honestly it's one of the best explanations of the center hinge technique I've seen on TH-cam. I'm sharing it with my brother-in-law who purchased some decals from me.
Just amazing technique. Thanks so much for sharing!
Great video. Good to also note that if using a self levelling laser, the truck needs to be on a level surface. Thanks.
Hi Tony,
In this application we used a self leveling green laser to set our level line. Stabilo chalk pencils are typically our go to for quick registration points.
Only was I was shown, works great even on 6' window graphics.👍
push pin type thumbtacks work great, if you get a bubble.
Thank you. Great video instructional 😊
Thank you! This was very helpful 💪🏽
Thank you
Is there an advantage to printing that sticker on wrap material? Why use wrap over those vinyl stickers? Thanks!
is an application fluid necessary? i noticed you did not use one.
It's only old school when you're a young kid
What type of vinyl do you recommend for dump trucks that carry hot asphalt? I need decals on the body
Is there a preferred temp to make sure the graphic will stick properly, I have to do this outdoors? It felt like summer last week but today feels like winter lol.
The desired temperature is between 60-75 degrees Fahrenheit, however you can preheat the surface if too cold to avoid adhesion issues.
what do you mean when you say 70/30 isopropyl
@@scrapin2010 It is isopropyl alcohol, I just used cheap rubbing alcohol for the final clean in a spray bottle, worked really well too!
That’s correct we use the 70 percent alcohol 30 percent water ratio…down to 50/50 to cut the oils to maximize the adhesive bond to the paint.
Helpful. Thanks! 🙏
How long does something like this last??
I’m trying to do this. It’s 28 degrees and not sticking.
I'm surprised a video had to be made to do this job of installing a decal. I did this in early '70's and it seems and looks like nothings changed so far
Which vinyl is that? Oracle 651? Thanks 😊
Hello, this is the 751 series, we find it much more convenient for both installations and overall durability.
His flat top is old school 😂
😂😂😂
What was the name of the pencil you used?
Chalk pencil
stabilo...they are the best at erasing when you are finished installing the kit.
Is he single?
He have a ring 😅
What is the name of the tape you used?