Translated with Google translate, sorry for any mistakes. Do these steel wheels run in snow? And can you install a snow plow? Because as far as I know, there is no such plow for it.
yes, i think steel wheels will go in snow no problem, even in ice. i dont know about snow plow, you would probably need to make one, but machine is so powerful that it would work no problem
@@mk15handyman lol lol Well I've got one of these machines and the rear vertical steel adjustable post is probably the most important thing to the correct operation of the machine which is printed in the instruction book and all TH-cam videos (except of course yours). What happened ? I suspect that it was taken off and the plough fixing was put on. Anyways now you know !
Also you are not keeping the machine level. The manual says not to lean the machine back or forward more than 20 degrees when operating because the oil will not circulate correctly and the engine may be damaged.
@@mk15handyman I only read the manual afterwards too. Another tip from the manual that I missed was.. if you have a jet washer then don't hold it closer than 1m to the machine. Thanks for the video.
The function of turning the steering column is very useful; it allows you not to trample the plowed ground and walk side by side.
Thx for your comment. I like that too. And it folds for storage nicely
It is running away from you because you are missing the depth bar at the back.
Exactly, it's a steel rod with a bent end. You don't need that plow.
Ich habe eine Stihl MH 445 . Sie ist immer noch sehr gut . Danke für dein Video . Like 9
Danke
o hold the machine in the ground, there is a special steel rod with different depths of driving into the ground
Thx for comment. Yes it is, I know now now. I need to order it as I lost original.
dziękuję za komentarz i za oglądanie
Translated with Google translate, sorry for any mistakes. Do these steel wheels run in snow? And can you install a snow plow? Because as far as I know, there is no such plow for it.
yes, i think steel wheels will go in snow no problem, even in ice. i dont know about snow plow, you would probably need to make one, but machine is so powerful that it would work no problem
@@mk15handyman lol lol Well I've got one of these machines and the rear vertical steel adjustable post is probably the most important thing to the correct operation of the machine which is printed in the instruction book and all TH-cam videos (except of course yours). What happened ?
I suspect that it was taken off and the plough fixing was put on. Anyways now you know !
beast
Also you are not keeping the machine level. The manual says not to lean the machine back or forward more than 20 degrees when operating because the oil will not circulate correctly and the engine may be damaged.
Those are very good points. Thx
@@mk15handyman I only read the manual afterwards too. Another tip from the manual that I missed was.. if you have a jet washer then don't hold it closer than 1m to the machine. Thanks for the video.
Дорогая игрушка, только для очень мягкой земли и в небольших объёмах, к нормальному мотоблоку ни какого отношения
Фрезы точешь и целину берёт или гусиные ставь
Сошник не вторкнул
Он хотел перевести слово "вторкнул", но онлайн переводчик глюкнул.🤣