The Yoshi came with my 16 Duke. I love ❤️ the sound , I agree #1 bike I've ever owned OMG this thing is a dream . I wish every hooligan could experience LC8 torque. The pull is pulled is so linear. Demo truck came through Houston in 18. Hopped on a 990 and I was never the same. My 16 SDR came with all the goodies. Enjoy your Duke .
Hey dude, nice ride! She sounds really good with that slip-on. I have a Gen 2 with a CRT De-cat that is just mental on all levels. If I may suggest, I replaced the stock steering damper fluid because the original fluid is just too watery and I got some slight wobbles at triple digits LOL. Besides that, these bikes are wonderful and are so smart out of the box. If you get a chance, check out a guy on TH-cam who goes by "By Eric". He has tons of great SDR information. BTW, I added ya on IG.
Thanks bud, appreciate ya! WRT the steering damper, I did the same thing. Found out it likes to wobble at higher speeds. I put an aftermarket progressive damper on it. Probably overkill, but seemed easier than pulling the old one apart and putting thicker gear oil in it.
Now that you've had this exhaust installed for a while have you noticed any change in the exhaust note? I have the same bike as you and am in the process of gathering information on the SC-1R. Thank you.
First thing I did before I put 1 mile on my 2021 SDR is take a 2" whole bit to the stock exhaust an cut the baffle out🤭 fuck stock!!! That had to do before my Austin Racing GP1RR showed up. SC PROJECT sounds good!!! SC Project an Austin Racing in my opinion is the best ya can get for 1290 SUPERDUKE R🤘😆🤙🏼
Hi mate, is it right that thas SC Project slip on adds about 7hp and 8Nm torque with no remaping? By the way awesome sound. Im still hesitating between AR and SC 😅 Thx
I wouldn’t want to say any hp gains without putting it on a dyno, but I can say that it seems to have much better low end response. It’s hard to tell with seat of your pants feel but I think it did add some horsepower. Plus it’s about half the weight as well. I have t done any mapping and it’s doing just fine.
Yep. Totally agree. Unfortunately, you have to drill through the muffler to access the bolt that holds in the baffle. It’s winter time here so the bike is not getting ridden much and it’s a good time to tackle that.
Thanks a lot for the time to make a great video !
Thank you. I really appreciate you taking the time to comment on it. Cheers!
Sounds good thanks for the comparison , I've got a Yoshi on my beast .
How do you like the yoshi?
The Yoshi came with my 16 Duke. I love ❤️ the sound , I agree #1 bike I've ever owned OMG this thing is a dream . I wish every hooligan could experience LC8 torque. The pull is pulled is so linear. Demo truck came through Houston in 18. Hopped on a 990 and I was never the same. My 16 SDR came with all the goodies. Enjoy your Duke .
Bro nice exhaust and sounds amazing I'm getting one hope sound as good on my triumph 1200 rs 🙌
Definitely let me know what you think once it’s on
@@upshiftingadventures4034 will do bro 😎 definitely 👍
Hey dude, nice ride! She sounds really good with that slip-on. I have a Gen 2 with a CRT De-cat that is just mental on all levels. If I may suggest, I replaced the stock steering damper fluid because the original fluid is just too watery and I got some slight wobbles at triple digits LOL. Besides that, these bikes are wonderful and are so smart out of the box. If you get a chance, check out a guy on TH-cam who goes by "By Eric". He has tons of great SDR information. BTW, I added ya on IG.
Thanks bud, appreciate ya! WRT the steering damper, I did the same thing. Found out it likes to wobble at higher speeds. I put an aftermarket progressive damper on it. Probably overkill, but seemed easier than pulling the old one apart and putting thicker gear oil in it.
Very good video🔥
Thumbs up and much support from my side!
Appreciate ya! Thanks for the support.
Now that you've had this exhaust installed for a while have you noticed any change in the exhaust note? I have the same bike as you and am in the process of gathering information on the SC-1R. Thank you.
If anything, it has become a little less raspy. I’m very happy with it
First thing I did before I put 1 mile on my 2021 SDR is take a 2" whole bit to the stock exhaust an cut the baffle out🤭 fuck stock!!! That had to do before my Austin Racing GP1RR showed up.
SC PROJECT sounds good!!!
SC Project an Austin Racing in my opinion is the best ya can get for 1290 SUPERDUKE R🤘😆🤙🏼
I think the factory pipe was good enough performance wise, but again, if it ain’t loud, make it that way!
Exelente video
Thank you.
i have the same bike colors with the same exhaust mate. do you feel any less power than stock?
I haven’t noticed any drop in power over stock. I did notice that the low end power is more responsive though.
Hi mate, is it right that thas SC Project slip on adds about 7hp and 8Nm torque with no remaping?
By the way awesome sound. Im still hesitating between AR and SC 😅
Thx
I wouldn’t want to say any hp gains without putting it on a dyno, but I can say that it seems to have much better low end response. It’s hard to tell with seat of your pants feel but I think it did add some horsepower. Plus it’s about half the weight as well. I have t done any mapping and it’s doing just fine.
@@upshiftingadventures4034 Thank You for your answer. I will order it now 😅 take care.
@@upshiftingadventures4034 hhfjjfzjxjfjdjejejjjj
Where did your SC exhaust from?
You can go directly through SC Project US
@@upshiftingadventures4034 - thank you. I’m going to get the Titanium.
Sound Mean🔥🔥✊Db kiler?
It is supposed to be removable but I can’t get it to come out. Gave up before I ended up messing up the exhaust. Still sounds great though
@@upshiftingadventures4034 there’s a tutorial on here, u have to drill hole in side of it
It's time to remove baffle 🎉
Yep. Totally agree. Unfortunately, you have to drill through the muffler to access the bolt that holds in the baffle. It’s winter time here so the bike is not getting ridden much and it’s a good time to tackle that.