I replaced the PCV valve (OEM part from local dealership) on our 2012 Highlander during a routine oil change. We noticed a rough idle and weird oil consumption this past year. I noticed an immediate difference after putting the new PCV valve in. AMD was right, it’s a tight spot! Thanks for the video!
Changing the PCV valve today in my 07 Yaris with 157,900 miles. It sits right on top and is easy to get to. Actually, changing the coolant, the transmission fluid, & oil change; everything easy so far. I'm a 70 yr old female and recommend the Yaris for ease of maintenance & the best Toyota engine per The Car Care Nut!
As an old mechanic and 17 year employee of the Toyota KY. Plant I thank you. I think you should sale t-shirts that say "folks don't do this, this is not good." I'd buy one.
Mine is in the same I was able to remove and replace it simply by lifting up the car as if I was going to do an oil by using a creeper I simply slid under the car and replaced the PCV valve without moving anything out of my way or taking any brackets apart not a simple job but once you figure out ways to put your ratchet it's possible it took me about 1 hour and 30 minutes to replace it with new OEM valve
I did this job with your guidance, I lucked out and got the new one started on the first try. Yes it isn't easy, but like you I have done some difficult jobs on cars. I have had worse but not by much LOL!
Took me about 2 and half hours total but I made it. I had to run and a deep socket set and a 3" extension bar. I wanna know what the engineer was thinking!! Lol. And I'm also glad you took your time to explain the entire process. I wouldn't of known that clamp was on the hose end because I didn't feel it at all. I had to wiggle it slowly to where it was turned downwards so I could take it off. Thanks AMD.
Great video . I just replaced the valve on my 2012 Camry SE . Everything is exactly as you described . My 2 cents : a better way to reach the hose is from under the car and if you open the hood , the natural light gives you a better view . I also used a joint socket adapter and a larger socket extension to remove the valve . Thank you very much for the video .
Wow what a crazy spot. All PVC vales should be right on top of the vales cover gasket right on top. My hyundai sonata and outlander are super easy to do. I'm never gonna do it to our 2017 toyota camry
Great videos as usual. I have replaced the PCV valve in my 2009 Highlander. But did the expensive way (manifold removal). It was a $ 500 job for a $20 part. Let me tell you that it was totally worth it! It's like night & day. The engine is back to life. This HL has 167K miles and it was sluggish and burning oil for a while (no blue smoke. Just drinking 1qt every 1000). If your Toyota has >100k I totally recommend replacing the PCV. It is amazing the manual don't call for PCV replacement.
I am the original owner of a 2012 Camry 2.5 with 163,000 miles and have never changed the pcv valve. Mine uses about the same amount of oil and I hope this will help. I bought an aftermarket pcv valve a few months ago with other parts but after watching this video I will probably get an OEM one so I will only do this once.
After the at-205 my 2013. Then on the advice of a Toyota mechanic I tried Blue devil sealer and it's been good , no leaks. I still would like to do the PVC and I have bought it recently
I have 2010 Toyota Camry 2.5L with over 230,000 miles on it and I've never replaced the PCV valve or that hose. Now my OCD is going crazy!! I got to get this done. 🥶🥶🤯🤯
Thank you for this video I just installed my new oem PCB valve and hose on my 2012 Camry. With out this video there is no way I would of been able to do this. Thanks again for all your videos.
My father, a Master Diesel Technician of over 40 years would teach me to “grow eyes on my fingers” Sometimes, it even helped to close my eyes while using my fingers to feel around. Patience is a virtue….
I just did this on my 17 Camry 2.5 XSE and it took me about 90 minutes to change the PCV valve, I also changed my spark plugs. Car runs like a champ. I drive 80% on the highway so my engine with 66K miles on it gots lot's of life still.
I did this on a 2013 Rav4 LE and found it easier to do most of the procedure from the top instead of underneath. Moving the coolant bottle to the side (you do not need to remove the 2 coolant hoses) allows more room to work (along with removing the back bracket for the bottle). You still need to remove the crank position sensor and bracket, from bottom. I also found it was easier to remove the PCV hose, from the top, by pulling off the intake side first, then pulling it off PCV. The bend on the hose is tight, making it hard to get a grip, but doing it this way allows to grip it better and much less intimidating. Also using a ratchet from the top allows you to use a longer handle to break loose PCV (be gentle) along with 2 small extensions. Trying to use a small ratchet from the bottom was difficult to get leverage with limited room. One other tip...looking up from the bottom, you can see the tip of the PCV, which allows putting the socket on and initially push the hose on much easier. Make sure you lightly lubricate hose before installing. None of this would have been possible with out the video. Thanks AMD!
Thanks for your comments. I️ tried to do from the button on a camry 2012 and, as you mention, the space is too limited to pull the hose and no visibility at all to put back the hose in place.
@@markweatherill yes sir, just give it to 'er and tighten that bolt without mercy and with all strength you can muster and come up with, and then use a breaker bar to "give er" another 1/4 of a turn, and it ain't ganna be comen off, ever literally lol)
I have a 1999 Camry 2.2 liter that I need to replace the valve cover gasket. So I ordered all my parts including the PCV valve and spark plugs from Toyota. Gaskets and everything. Can’t wait to do it.
Great tips AMD. In my career as a mechanic you have to learn those, I call it, racoon skills with your fingers. I'm 69 and retired now . My fleet of 98 school buses and equipment was an enjoyable experience.
I replaced This On My 2012 camry around 100k few years Ago. I will replace soon om my 2016 Camry also when the weather is Warmer and no snow. Replace the Hose while you're at it. Does not cost much i think i paid under $20 for the Hose and Around $10 for the Valve at my Local Toyota dealer. A quick Tip; To Help you start the new pcv valve in without crossing the threads, Cut the Old Hose (that you replacing Also) about 4 inches and insert it into the Valve Without the clamp and it will make your life Easier. Then use the Socket wrench.
Great video! Love the attention to details. I just did mine last night. The lack of space and you weren't kidding about "feeling around". The toughest thing was installing the new PCV valve and making sure you are not cross-threading it.
This is supremely helpful sir. I own a 17 of the exact same model and I am the same way this person is. Absolutely love my car! Coming from nothing but American cars to this has been so eye opening in terms of differences in quality. Than you for the content and thanks to Mrs. Car Care Nut for the awesome camera work. God bless
This video inspires me to take better care of my 2003, tundra, 5 VZ--FE. Runs like a champ. Original owner. Changing the PCV valve is SIMPLE, by comparison, to what I just viewed. I would never have attempted what I just viewed on this particular vehicle. PCV for my '03 Tundra... $10-ish.
Great video. The hose was difficult to remove, but I found that removing it from the top side made it release from the PCV valve much easier. Thanks for the help.
I will try that tomorrow on my 2011 Camry SE. I have changed it before by removing the intake manifold and its a long job. Keep these cars maintained and they will run forever. I just hit 324,000 miles on my 2011 and it Still runs as smooth as when I purchased it.
Mrs CCN, you are so professional in taking the videos since everything is so very well visible. You, guys, are awesome in making educational videos. Learning a lot from your channel. Didn’t even notice like more than two hours passed listening to Professor CCN!
From your video and another short specific one, I changed the PCV on a 2013 RAV4. If it wasn't for you I would have never believed the PCV was there. Took me about 40 mins to find it with yours and the other video playing on the laptop and positioning the laptop to as close to the same view as possible. Then I kept losing it. Should have marked the path to it with something. I broke the hose pulling it off and pulled the other end off, which because of how tight everything which also took a lot of time to find without removing components. Putting the PCV back in was even worse. The only way I could start the threads was with a terrible position with my left arm weaved through a whole bunch of components. Putting the PCV in the socket did not work either. Something sharp dug into my forearm. I tried all kinds of body positions to try and find a better one. Nothing! Finally, just let it dig while starting the threads and dealt with my bleeding arm afterward. It was a weekend project and I had not purchased a new hose thinking I would use some fuel line hose if needed. Found out the nibble from the other end was significantly bigger than the PVC nibble and the dealer closed before I could get there! With soaking in no-odor mineral spirits and using a needle nose plier to enlarge the hose end, plus several yells and a few choice words, I finally got the hose to go on this end. The really crazy thing is with 105,000 miles on this vehicle the original PCV rattled better than some news I have had. I replaced it with a Toyota PCV which only slightly rattled better. Definitely not worth the effort at this time, but it was a memorial experience!
Highlight of my Saturday Morning...always learning something from the Master. Thanks for all your work and the young lady, too. Enjoy your videos, as usual.
Nice video about this part. I did this on my 2016 Scion tC (same engine) at the same time I replaced the spark plugs. Hardest part is getting that hose on and off. Never thought of just pulling the hose off and pushing it back on. But, I was able to pinch and move the compression clamp by hand. If you can do this, I recommend it because it will make getting the hose on and off much easier. On another note, it is possible to see the clamp and the end of the hose, but only when on your back lying under the car. But you definitely cannot see the whole PCV valve. Removal and replacement of the valve itself is a blind by feel job - easy enough.
Anytime you see that white carbon on the intake valve that is a very healthy clean running engine. That is something I learned from my dad who was a “ car care nut” professional Toyota tech back in the 70’s and 80’s. He was working there when the 1st Gen Camry, the 86 1/2 Supra, and the first Gen MR2 launched.
I lived in the rust belt for years but not anymore . If out on road and rim/tire froze in place get on your butt and kick with legs on right and left on rubber of the tire it will come right off I’ve shown all my 5 daughters this trick . Excellent video Iam sure I’ll be doing this on wife’s 16 soon at 110.000miles
*Word of advice to anyone doing this* You _CAN_ replace the PCV under the intake but GET A NEW HOSE and clips that hold it on. Chances are it will be hardened and crack split when you try to put it back on. I did mine earlier in the summer and getting access is pretty straight-forward but I could NOT get the old hose on without splitting. BTW - TAKE YOUR TIME, work by feel and keep checking yourself. You can do it.
I didn't have time to run to my local stealership and get a new hose. But the added bonus of using the old house is that it's already molded to fit the PCV. Both the hose and the clip went on with a satisfying click simply when I pushed it on. Oh yeah dab some engine oil on the inside of the house prior to attempting. Good point about the hose cracking though! I will keep an eye on mine.
I just got home from doing the PCV on my Scion tC. You are 100% correct about getting the hose and clips. My hose was split at the end that goes on the PCV and the clips are loose.
Thank you, AMD, for the excellent video clip with many valuable tips. I emailed you with a request for this procedure, and within a few days, here it is. Yeah, that not-so-polite term for a Toyota engineer who came up with the location of the PCV valve came to my mind more than once, to keep it mildly. I helped change PCV valves to several of my friends' vehicles, including 04 Sequoia, 08 Highlander, 13 Kia Soul, and so on, including my own 11 Nissan Altima, and in non of those cases took more than 2-3 min to do the job on my slow day. Thank you again, and keep up with the excellent job.
I have a 2006 Corolla 4ZZ FE 1.4 that is just a pain to work on as any newer Toyota. The engine bay is very compact and can often drive you crazy to get your hands in to access parts. At least this job will never worry me. Great channel and excellent mechanic.
Thank you for this great video. At the end when you recommend MAINTENANCE I find that to be the most important thing of all. I have a 1995 Toyota, 185K, that I've owned for almost 27 years. Over the years I DIY maintained it religiously. It runs and looks like a new one. It's so cool that this truck, T100 SR5, can hold it's own against the newest ones. My second vehicle, a 2006 Lexus GS, I purchased used about 10years ago. Same story here. I feel that I really don't need to purchase a new car unless I want to. I know these Toyotas will last for years longer and probably even outlast me. I watch your videos for repair & maintenance tips as I still do enjoy doing many DIY projects on these vehicles. Thanks for the info.
Enjoy your show but your comment on how this little valve is engineered floored me. If I had a job in my bay that billed 3 hours labor and took me less than 30 minutes, I would be sending that engineer birthday and Christmas cards. Jobs like this fund my 401K. Best Wishes!
The Car Care Nut . I have had the pcv valve for about 4 years and did not want to take the intake off. Takes too much time. This was the first video I saw replacing it this way. Your videos are very helpful. Thank you very much.
Thank you for the video AMD, I had a 2011 Camry and I have always wondered if there is a better way to access that PCV valve... This video is a DREAM COME TRUE!!!!
That must’ve hired a Mercedes’ engineer!!! There are several things on the Mercedes Sprinter that are done by braille. That’s the world I live in many days. Great video as always my friend and my hats off to the camera lady!!! Give Mrs. AMD my best!! ✌️
@@vw5056 I have some of those in my fleet as well. They truly aren’t to bad. Except the cam position sensors on the back of the heads. You’re doing those by braille. LOL. But as a whole they are pretty good to work on.
Great shortcut! You can actually practice blind on junk parts if you have any. I used to assemble the coaster brake on my bicycle blindfolded based on my dad telling me they had to learn to service their firearms blind in the army during ww2.
I have ‘16 CRV with 90k miles on it; we owned it since brand new I can not wait to see its spark plugs condition when it’s time to replaced its spark plugs at 100k miles on its K24W
Sir I absolutely love your videos...I'm a mechanic myself, I've learned a lot of your videos, THANK YOU,...I also own a 2021 Tundra....love it...yes horrible in gas ..but we can't have everything haha...but again love your videos PLEASE keep them coming and God Bless You
Thanks Amd, I am not a pro, but I just did this job in my driveway with hand tools in 1.5 hours. I did this on a 2011 Rav4 in my driveway yesterday. The clamps are not tight and you can carefully pull the hose off the PCV. I was able to reuse my old hose and the added bonus of it being hardened is that it clips back on the new valve with confirmation via sound and feel. Be sure to dab the hose end with a little oil to make it go on easier with the hose clamp in place. Then put the other end of the hose on via the top of the engine. Rubber gloves are a must because that's what lets you grip the tip of the PCV and get the new PCV threaded back on. Oh yeah, the third generation Rav4 only has enough room to use only one hand.
Great instructional,just did mine.I had no problem until trying to hand thread the valve back in,just cramped and trying to find that hole blind is a little rough. All good now Thanks
My 2013 rav4 started burnung a lot of oil. At 165k miles i performed the pcv replacement as per AMD here. Not so easy, i got it out with relative but going back in took a couple hours. Twice i backed the valve out because i wasnt sure if i was going in straight. Lots of different body positions, im a bigger guy so i couldnt do it as shown. Anyway, after 3 hours and a lot of fear, lol, got it together and she runs great. Lets see if the oil loss is solved. Thank you for the excellent guidance. Saved my family a lot of money. Thank you sir
This makes me miss my '96 Chevy Monte Carlo - the pcv valve was right there at the top of that engine and super simple to just disconnect the hose and replace the valve! lol I actually have this car - the 2016 Camry LE - and it has served me well. 97k miles after just under 6 years of driving. I bought it brand new with only 12 miles on it and it has been a pleasure to drive. Perfect maintenance record as I've taken it to the dealership every ~5k miles for service. The only things I'm concerned about currently is a clicking when making sharper turns (sounds like it's down around the wheel but mechanics have found nothing so far) and from time to time the AC fan seems to fluctuate speed - almost like it's not sure what speed its supposed to be at. (Turning it off and back on usually gets it working fine again. Another issue that never happens when I'm in for service. lol) Aside from those 2 minor things, I haven't had to replace anything other than the normal stuff you do for routine maintenance. Absolute gem of a car!
Many thanks! I did this today. It seems to be a lot easier if you do the whole thing from under the car by the wheel well as opposed to reaching in from the side. And the use of a little anti-seize on the new PCV threads significantly cut down on the probability of cross threading as the thread was extremely tight in there. This way I was able to start screwing in the new valve by hand for a few turns.
One trick I learn to take off a stuck tire: loosen the lug nuts but don’t take them off. Keep that tire on the ground without jack up. Turn steering left and right and/or move the car forward and backward slightly and brake. Usually the weight of the car will loosen the rim from hub.
You always give good advice,,,Imagine I am a Sewing Machine Technician,,,and my fingers are my eyes,many times,,getting into all these small spaces,,well done
What works better than a mallet for me when removing a seized wheel is putting your back to the car pulling your leg forward and giving the tire a hard rear kick contacting the bottom of the tire with your heel.
Ty always a great learning experience with you AMD, just goes to show the hands of a experienced mechanic can do miracles when the problem is out of the view of the eyes. Keep Safe Keep Strong My Dear friend
The book my 2015 came with said nothing about PCV valve change intervals ?? So what should it be?? If you get one of these engines out of the car , with a new valve, you can actually measure the thread on the valve and install a similar fitting with a metal hose, like brake line, the other end a female fitting so now the vale is at a place where it is accessible easily. With a shop like yours , I can even take apart a 6, 8 speed transmission and find out where I can drill and easily install a tube for a dip stick.
Just use a prybar on the inside of the wheel prying on the lower ball joint and it will come off with very little effort. This tip is from an old German mechanic.
I just did a pcv valve on a 2009 Corolla. My work area Central Avenue in Tampa. I had to remove the intake manifold, actually pull it back about 6 inches and there it was. Right under the 3rd inlet of the intake manifold. The job was half hour maybe 45 minutes. I am not a mechanic. I ended up replacing the intake manifold gasket because I misdiagnosed a P0301 or engine misfire. With the experience replacing the intake manifold probably took a half hour maybe. Unfortunately thanks to a compression check blown head gasket. Reason for clicking on your video, your thumbnail popped up.
Very good tutorial. Why couldn't you use that borescope ($60-$125)that you used on the cylinder for guiding the extraction and insertion of the PCV valve. Otherwise it is going to be $375 on the labor? You could secure it and point the camera by sticking with tape or silly putty nearby. The rusty wheel hub was an easy fix. Thanks again you are a very good teacher.
I replaced the PCV valve (OEM part from local dealership) on our 2012 Highlander during a routine oil change. We noticed a rough idle and weird oil consumption this past year. I noticed an immediate difference after putting the new PCV valve in. AMD was right, it’s a tight spot! Thanks for the video!
Changing the PCV valve today in my 07 Yaris with 157,900 miles. It sits right on top and is easy to get to. Actually, changing the coolant, the transmission fluid, & oil change; everything easy so far. I'm a 70 yr old female and recommend the Yaris for ease of maintenance & the best Toyota engine per The Car Care Nut!
You are an incredible teacher. Just bought a used 2014 RAV4 with only 44k and I've already learned a lot from your channel. Thank you
As an old mechanic and 17 year employee of the Toyota KY. Plant I thank you. I think you should sale t-shirts that say "folks don't do this, this is not good." I'd buy one.
Today my Toyota dealer quoted me $694 to replace the pvc valve. I can do it myself now. Thank you!
My mechanic charged me $350.
$694!???
$410 at the dealership near me!
Mine has a power steering pump in the way geez . I guess some 11 camrys are different ?!
Literally the exact same quote and recommendation. Thank you!
That’s my sisters car thank you for the service and being very helpful to my dad.
You’re very welcome! The car is in great shape!
Now you can change it for her at 200k… 😁
Mine is in the same I was able to remove and replace it simply by lifting up the car as if I was going to do an oil by using a creeper I simply slid under the car and replaced the PCV valve without moving anything out of my way or taking any brackets apart not a simple job but once you figure out ways to put your ratchet it's possible it took me about 1 hour and 30 minutes to replace it with new OEM valve
I couldn't turn it using this method and feared breaking it. I'm due for an oil change, so I'll check this access.
I did this job with your guidance, I lucked out and got the new one started on the first try. Yes it isn't easy, but like you I have done some difficult jobs on cars. I have had worse but not by much LOL!
This is a good example why I like your channel....It's great to watch someone who knows what they're doing & what they're talking about.
I put anti seiz on my Camry hubs. Learned that lesson early on.
Change PCV looks so easy when professional is doing job. That engine is in good condition. Thank you Mrs TCCN and AMD.
Took me about 2 and half hours total but I made it. I had to run and a deep socket set and a 3" extension bar. I wanna know what the engineer was thinking!! Lol. And I'm also glad you took your time to explain the entire process. I wouldn't of known that clamp was on the hose end because I didn't feel it at all. I had to wiggle it slowly to where it was turned downwards so I could take it off. Thanks AMD.
I wish you are my service man. You take care of people and not rip off. God bless you
Great video . I just replaced the valve on my 2012 Camry SE . Everything is exactly as you described . My 2 cents : a better way to reach the hose is from under the car and if you open the hood , the natural light gives you a better view . I also used a joint socket adapter and a larger socket extension to remove the valve . Thank you very much for the video .
Would I still need to remove the wheel, etc? Thank you
@@MusiqTruth… removing wheel provides easier Safety And easier Access…
Wow what a crazy spot. All PVC vales should be right on top of the vales cover gasket right on top. My hyundai sonata and outlander are super easy to do. I'm never gonna do it to our 2017 toyota camry
Great videos as usual. I have replaced the PCV valve in my 2009 Highlander. But did the expensive way (manifold removal). It was a $ 500 job for a $20 part. Let me tell you that it was totally worth it! It's like night & day. The engine is back to life. This HL has 167K miles and it was sluggish and burning oil for a while (no blue smoke. Just drinking 1qt every 1000). If your Toyota has >100k I totally recommend replacing the PCV. It is amazing the manual don't call for PCV replacement.
I am the original owner of a 2012 Camry 2.5 with 163,000 miles and have never changed the pcv valve. Mine uses about the same amount of oil and I hope this will help. I bought an aftermarket pcv valve a few months ago with other parts but after watching this video I will probably get an OEM one so I will only do this once.
After the at-205 my 2013. Then on the advice of a Toyota mechanic I tried Blue devil sealer and it's been good , no leaks. I still would like to do the PVC and I have bought it recently
@@tsukki_amv2848did it solve ur oil burning problem
I have 2010 Toyota Camry 2.5L with over 230,000 miles on it and I've never replaced the PCV valve or that hose. Now my OCD is going crazy!! I got to get this done. 🥶🥶🤯🤯
You can’t change the pcv valve the same way done in this vid. 2010s have a hydraulic power steering system.
Thank you for this video I just installed my new oem PCB valve and hose on my 2012 Camry. With out this video there is no way I would of been able to do this. Thanks again for all your videos.
My father, a Master Diesel Technician of over 40 years would teach me to “grow eyes on my fingers” Sometimes, it even helped to close my eyes while using my fingers to feel around. Patience is a virtue….
I just did this on my 17 Camry 2.5 XSE and it took me about 90 minutes to change the PCV valve, I also changed my spark plugs. Car runs like a champ. I drive 80% on the highway so my engine with 66K miles on it gots lot's of life still.
I did this on a 2013 Rav4 LE and found it easier to do most of the procedure from the top instead of underneath. Moving the coolant bottle to the side (you do not need to remove the 2 coolant hoses) allows more room to work (along with removing the back bracket for the bottle). You still need to remove the crank position sensor and bracket, from bottom. I also found it was easier to remove the PCV hose, from the top, by pulling off the intake side first, then pulling it off PCV. The bend on the hose is tight, making it hard to get a grip, but doing it this way allows to grip it better and much less intimidating. Also using a ratchet from the top allows you to use a longer handle to break loose PCV (be gentle) along with 2 small extensions. Trying to use a small ratchet from the bottom was difficult to get leverage with limited room. One other tip...looking up from the bottom, you can see the tip of the PCV, which allows putting the socket on and initially push the hose on much easier. Make sure you lightly lubricate hose before installing. None of this would have been possible with out the video. Thanks AMD!
Thanks for your comments. I️ tried to do from the button on a camry 2012 and, as you mention, the space is too limited to pull the hose and no visibility at all to put back the hose in place.
I did this on my 2011 RAV4, a generation earlier than yours. Couldn't do it from the top but you have excellent tips though!
Did you have a ❤code on your 2013 or did you jus do it as precautionary maintenance?
Precautionary maintenance. Vehicle had 100K miles at time of replacement.
Well he said this video applied to a 2009 to 2012 RAV4, not a 2013, so you have that.
A good method to prevent cross threading is to turn the bolt counterclockwise until the bolt seats correctly. Then, turn the bolt clockwise to fasten.
Yes, I agree! Ur method has wrkd for me for decades.
yep, i do this with almost every bolt.
that works with metric bolts, i suppose. For Imperial fasteners you just need brute force and ignorance.
@@markweatherill yes sir, just give it to 'er and tighten that bolt without mercy and with all strength you can muster and come up with, and then use a breaker bar to "give er" another 1/4 of a turn, and it ain't ganna be comen off, ever literally lol)
Imagine cross threading this. You won't have a bad day but a bad month.
I saw the thumbnail and I got really excited! Thank you so much AMD and Mrs. Car Care Nut!
I have a 1999 Camry 2.2 liter that I need to replace the valve cover gasket. So I ordered all my parts including the PCV valve and spark plugs from Toyota. Gaskets and everything. Can’t wait to do it.
Great tips AMD. In my career as a mechanic you have to learn those, I call it, racoon skills with your fingers. I'm 69 and retired now . My fleet of 98 school buses and equipment was an enjoyable experience.
I have the same car but a 2015, with almost 134,000 on it. Love the car, also taken well care of.
I replaced This On My 2012 camry around 100k few years Ago. I will replace soon om my 2016 Camry also when the weather is Warmer and no snow. Replace the Hose while you're at it. Does not cost much i think i paid under $20 for the Hose and Around $10 for the Valve at my Local Toyota dealer. A quick Tip; To Help you start the new pcv valve in without crossing the threads, Cut the Old Hose (that you replacing Also) about 4 inches and insert it into the Valve Without the clamp and it will make your life Easier. Then use the Socket wrench.
Great video! Love the attention to details. I just did mine last night. The lack of space and you weren't kidding about "feeling around". The toughest thing was installing the new PCV valve and making sure you are not cross-threading it.
I have a 2017 camery and the Toyota shop told me it would cost 650.00 big ones so I want to do it a cheaper way.
This is supremely helpful sir. I own a 17 of the exact same model and I am the same way this person is. Absolutely love my car! Coming from nothing but American cars to this has been so eye opening in terms of differences in quality. Than you for the content and thanks to Mrs. Car Care Nut for the awesome camera work. God bless
you my best car youtuber, can I ask why there's no upgrades on the Toyota Prius alpha ?
This video inspires me to take better care of my 2003, tundra, 5 VZ--FE. Runs like a champ. Original owner. Changing the PCV valve is SIMPLE, by comparison, to what I just viewed. I would never have attempted what I just viewed on this particular vehicle. PCV for my '03 Tundra... $10-ish.
We're in trouble.
Muchas gracias mi amigo, it took me more than 5 minutes 😅 and bruised fingers but job is done, thanks for all your videos and help to us the people.
Great video. The hose was difficult to remove, but I found that removing it from the top side made it release from the PCV valve much easier. Thanks for the help.
I will try that tomorrow on my 2011 Camry SE. I have changed it before by removing the intake manifold and its a long job. Keep these cars maintained and they will run forever. I just hit 324,000 miles on my 2011 and it Still runs as smooth as when I purchased it.
Mrs CCN, you are so professional in taking the videos since everything is so very well visible. You, guys, are awesome in making educational videos. Learning a lot from your channel. Didn’t even notice like more than two hours passed listening to Professor CCN!
From your video and another short specific one, I changed the PCV on a 2013 RAV4. If it wasn't for you I would have never believed the PCV was there. Took me about 40 mins to find it with yours and the other video playing on the laptop and positioning the laptop to as close to the same view as possible. Then I kept losing it. Should have marked the path to it with something. I broke the hose pulling it off and pulled the other end off, which because of how tight everything which also took a lot of time to find without removing components. Putting the PCV back in was even worse. The only way I could start the threads was with a terrible position with my left arm weaved through a whole bunch of components. Putting the PCV in the socket did not work either. Something sharp dug into my forearm. I tried all kinds of body positions to try and find a better one. Nothing! Finally, just let it dig while starting the threads and dealt with my bleeding arm afterward.
It was a weekend project and I had not purchased a new hose thinking I would use some fuel line hose if needed. Found out the nibble from the other end was significantly bigger than the PVC nibble and the dealer closed before I could get there! With soaking in no-odor mineral spirits and using a needle nose plier to enlarge the hose end, plus several yells and a few choice words, I finally got the hose to go on this end.
The really crazy thing is with 105,000 miles on this vehicle the original PCV rattled better than some news I have had. I replaced it with a Toyota PCV which only slightly rattled better. Definitely not worth the effort at this time, but it was a memorial experience!
Another guy commented here said he did from the top of his Rav4 by removing his washer tank.
Highlight of my Saturday Morning...always learning something from the Master. Thanks for all your work and the young lady, too. Enjoy your videos, as usual.
Nice video about this part. I did this on my 2016 Scion tC (same engine) at the same time I replaced the spark plugs. Hardest part is getting that hose on and off. Never thought of just pulling the hose off and pushing it back on. But, I was able to pinch and move the compression clamp by hand. If you can do this, I recommend it because it will make getting the hose on and off much easier.
On another note, it is possible to see the clamp and the end of the hose, but only when on your back lying under the car. But you definitely cannot see the whole PCV valve. Removal and replacement of the valve itself is a blind by feel job - easy enough.
Anytime you see that white carbon on the intake valve that is a very healthy clean running engine. That is something I learned from my dad who was a “ car care nut” professional Toyota tech back in the 70’s and 80’s. He was working there when the 1st Gen Camry, the 86 1/2 Supra, and the first Gen MR2 launched.
Your dad is now our dad too.
Love the your TH-cam videos, I'm an aircraft mechanic by trade and completely undersatnd working by feel, or what we call our minds eye.
I lived in the rust belt for years but not anymore . If out on road and rim/tire froze in place get on your butt and kick with legs on right and left on rubber of the tire it will come right off I’ve shown all my 5 daughters this trick . Excellent video Iam sure I’ll be doing this on wife’s 16 soon at 110.000miles
Great video , help me a lot , now I have a ease way to replace the pcv on my Toyota Corolla
*Word of advice to anyone doing this*
You _CAN_ replace the PCV under the intake but GET A NEW HOSE and clips that hold it on. Chances are it will be hardened and crack split when you try to put it back on. I did mine earlier in the summer and getting access is pretty straight-forward but I could NOT get the old hose on without splitting.
BTW - TAKE YOUR TIME, work by feel and keep checking yourself. You can do it.
I didn't have time to run to my local stealership and get a new hose. But the added bonus of using the old house is that it's already molded to fit the PCV. Both the hose and the clip went on with a satisfying click simply when I pushed it on. Oh yeah dab some engine oil on the inside of the house prior to attempting.
Good point about the hose cracking though! I will keep an eye on mine.
I just got home from doing the PCV on my Scion tC. You are 100% correct about getting the hose and clips. My hose was split at the end that goes on the PCV and the clips are loose.
A wipe-down with the rag and life's good. Ahmed, thanks for the helpful tips that many of us would overlook.
Thank you, AMD, for the excellent video clip with many valuable tips. I emailed you with a request for this procedure, and within a few days, here it is. Yeah, that not-so-polite term for a Toyota engineer who came up with the location of the PCV valve came to my mind more than once, to keep it mildly. I helped change PCV valves to several of my friends' vehicles, including 04 Sequoia, 08 Highlander, 13 Kia Soul, and so on, including my own 11 Nissan Altima, and in non of those cases took more than 2-3 min to do the job on my slow day. Thank you again, and keep up with the excellent job.
I have a 2006 Corolla 4ZZ FE 1.4 that is just a pain to work on as any newer Toyota. The engine bay is very compact and can often drive you crazy to get your hands in to access parts. At least this job will never worry me. Great channel and excellent mechanic.
Thank you for this great video. At the end when you recommend MAINTENANCE I find that to be the most important thing of all. I have a 1995 Toyota, 185K, that I've owned for almost 27 years. Over the years I DIY maintained it religiously. It runs and looks like a new one. It's so cool that this truck, T100 SR5, can hold it's own against the newest ones. My second vehicle, a 2006 Lexus GS, I purchased used about 10years ago. Same story here. I feel that I really don't need to purchase a new car unless I want to. I know these Toyotas will last for years longer and probably even outlast me. I watch your videos for repair & maintenance tips as I still do enjoy doing many DIY projects on these vehicles. Thanks for the info.
Enjoy your show but your comment on how this little valve is engineered floored me. If I had a job in my bay that billed 3 hours labor and took me less than 30 minutes, I would be sending that engineer birthday and Christmas cards. Jobs like this fund my 401K.
Best Wishes!
An ethical mechanic would not charge 3hrs.
Your customer would be pissed if you charged 3 hours but he only waited 30 minutes.
The Car Care Nut . I have had the pcv valve for about 4 years and did not want to take the intake off. Takes too much time. This was the first video I saw replacing it this way. Your videos are very helpful. Thank you very much.
You make the best informative videos. Love your editing.
Thank you for the video AMD, I had a 2011 Camry and I have always wondered if there is a better way to access that PCV valve... This video is a DREAM COME TRUE!!!!
I'm impressed with this mechanic.
You the man,i bought a toyota and that hose was missing,need i say more,thanks to you im going to save time and money,thank you.
This was like watching a doctor do an endoscopy. Ur amazing, doc!
That must’ve hired a Mercedes’ engineer!!! There are several things on the Mercedes Sprinter that are done by braille. That’s the world I live in many days. Great video as always my friend and my hats off to the camera lady!!! Give Mrs. AMD my best!! ✌️
All vans are an utter pain to work on other than the Nissan NV but you pay for it with the turning radius.
@@vw5056 I have some of those in my fleet as well. They truly aren’t to bad. Except the cam position sensors on the back of the heads. You’re doing those by braille. LOL. But as a whole they are pretty good to work on.
Great shortcut! You can actually practice blind on junk parts if you have any. I used to assemble the coaster brake on my bicycle blindfolded based on my dad telling me they had to learn to service their firearms blind in the army during ww2.
If your rifle jams at night, can repair it without any light, especially if your out in the field, give away your location to the enemy.
Thanks AMD for your service, and it’s a joy watching a master at his craft. Thanks to Mrs Car Care Nut, too!
Thanks for the video. I have been putting off on my 2010 RAV4. I feel a little more comfortable with doing it now.
I did this yesterday on my 2011 RAV4. Not too hard if you have some experience and follow AMD
I have ‘16 CRV with 90k miles on it; we owned it since brand new I can not wait to see its spark plugs condition when it’s time to replaced its spark plugs at 100k miles on its K24W
Sir I absolutely love your videos...I'm a mechanic myself, I've learned a lot of your videos, THANK YOU,...I also own a 2021 Tundra....love it...yes horrible in gas ..but we can't have everything haha...but again love your videos PLEASE keep them coming and God Bless You
Thanks Amd, I am not a pro, but I just did this job in my driveway with hand tools in 1.5 hours. I did this on a 2011 Rav4 in my driveway yesterday. The clamps are not tight and you can carefully pull the hose off the PCV. I was able to reuse my old hose and the added bonus of it being hardened is that it clips back on the new valve with confirmation via sound and feel. Be sure to dab the hose end with a little oil to make it go on easier with the hose clamp in place. Then put the other end of the hose on via the top of the engine. Rubber gloves are a must because that's what lets you grip the tip of the PCV and get the new PCV threaded back on.
Oh yeah, the third generation Rav4 only has enough room to use only one hand.
I replaced mine around 30k and will do it again at around 60K. Took me a while since it was in a weird spot. Thanks for this video
Did this on my 2015 Scion tC and it was even harder. There’s more room on the Camry. Most I’ve ever done was swap suspensions. I’m proud of myself lol
You’re the man ! “El caballo” , excellent explanation and honest advice !!!👍💪
yes indeed, there is a very special place in "hot-ville" for the auto designers....
You would have loved working on military jets, many jobs are done only by feel and you had to safely wire the part when done.
Your camera flip around minute 5 was genius. I’m using that. So good!
It's always nice to see owners who take good care of their cars. Remember, cars can't choose their owners.
Great instructional,just did mine.I had no problem until trying to hand thread the valve back in,just cramped and trying to find that hole blind is a little rough.
All good now
Thanks
My 2013 rav4 started burnung a lot of oil. At 165k miles i performed the pcv replacement as per AMD here. Not so easy, i got it out with relative but going back in took a couple hours. Twice i backed the valve out because i wasnt sure if i was going in straight. Lots of different body positions, im a bigger guy so i couldnt do it as shown. Anyway, after 3 hours and a lot of fear, lol, got it together and she runs great. Lets see if the oil loss is solved. Thank you for the excellent guidance. Saved my family a lot of money. Thank you sir
How is your oil looking? Bout to do this on a 2012 RAV4 with the 2ARFE.
Same question...did it help. I need to do this to my 2012 RAV4
This makes me miss my '96 Chevy Monte Carlo - the pcv valve was right there at the top of that engine and super simple to just disconnect the hose and replace the valve! lol
I actually have this car - the 2016 Camry LE - and it has served me well. 97k miles after just under 6 years of driving. I bought it brand new with only 12 miles on it and it has been a pleasure to drive. Perfect maintenance record as I've taken it to the dealership every ~5k miles for service.
The only things I'm concerned about currently is a clicking when making sharper turns (sounds like it's down around the wheel but mechanics have found nothing so far) and from time to time the AC fan seems to fluctuate speed - almost like it's not sure what speed its supposed to be at. (Turning it off and back on usually gets it working fine again. Another issue that never happens when I'm in for service. lol)
Aside from those 2 minor things, I haven't had to replace anything other than the normal stuff you do for routine maintenance. Absolute gem of a car!
Many thanks! I did this today. It seems to be a lot easier if you do the whole thing from under the car by the wheel well as opposed to reaching in from the side. And the use of a little anti-seize on the new PCV threads significantly cut down on the probability of cross threading as the thread was extremely tight in there. This way I was able to start screwing in the new valve by hand for a few turns.
I’m going to tackle this on my Wife’s ‘16 RAV 4 now. Appreciate it! Thank you.
Thanks to you and Mrs. Nut for an excellent informative video.
One trick I learn to take off a stuck tire: loosen the lug nuts but don’t take them off. Keep that tire on the ground without jack up. Turn steering left and right and/or move the car forward and backward slightly and brake. Usually the weight of the car will loosen the rim from hub.
I've helped neighbors with this method. Takes under a foot of horizontal movement to loosen the wheel.
Thank you for sharing this information. Performed this today and the job went exactly as you described. Wishing you the best with your new shop.
How does he know this stuff? Boy ,God sure has given him some gifts to help others and he is even in his church music ministry.
Having the right tools is 75% of the job.... thanx!
You always give good advice,,,Imagine I am a Sewing Machine Technician,,,and my fingers are my eyes,many times,,getting into all these small spaces,,well done
What works better than a mallet for me when removing a seized wheel is putting your back to the car pulling your leg forward and giving the tire a hard rear kick contacting the bottom of the tire with your heel.
Thanks for the advice and the know how. I did it myself and completed the job in two hours.
This is my favorite TV show
Ty always a great learning experience with you AMD, just goes to show the hands of a experienced mechanic can do miracles when the problem is out of the view of the eyes.
Keep Safe Keep Strong My Dear friend
Boy this camry looks nice underneath, especially in "rusty land".
Doing one of these next weekend on an '14 Camry...good times! Thanks for this vid bro!
I'm watching your videos it's an education every time thank you for your efforts.
The book my 2015 came with said nothing about PCV valve change intervals ?? So what should it be?? If you get one of these engines out of the car , with a new valve, you can actually measure the thread on the valve and install a similar fitting with a metal hose, like brake line, the other end a female fitting so now the vale is at a place where it is accessible easily. With a shop like yours , I can even take apart a 6, 8 speed transmission and find out where I can drill and easily install a tube for a dip stick.
This is a great PCV tip if I had a 2AR-FE motor. But I don't . I have done one on my 05 sienna though. Intake has to come off for that one for sure.
Great video! I replaced the pcv on my wife’s 2015 Camry today. Happened 4th
To take the tire off -loosen lug nuts 3-4 turns ,make a sharp turn ,low speed, the tire on the outer radius .Got it .
Another great video! Wrenching by feel is always fun! Miss my 2015 Camry
Just use a prybar on the inside of the wheel prying on the lower ball joint and it will come off with very little effort. This tip is from an old German mechanic.
I love that engine! Aside from the VVT gear rattle!! 22,000 for my RAV4 and it started doing that at 70,000 miles. Grrr
I just did a pcv valve on a 2009 Corolla. My work area Central Avenue in Tampa. I had to remove the intake manifold, actually pull it back about 6 inches and there it was. Right under the 3rd inlet of the intake manifold. The job was half hour maybe 45 minutes. I am not a mechanic. I ended up replacing the intake manifold gasket because I misdiagnosed a P0301 or engine misfire. With the experience replacing the intake manifold probably took a half hour maybe. Unfortunately thanks to a compression check blown head gasket. Reason for clicking on your video, your thumbnail popped up.
Very good tutorial. Why couldn't you use that borescope ($60-$125)that you used on the cylinder for guiding the extraction and insertion of the PCV valve. Otherwise it is going to be $375 on the labor? You could secure it and point the camera by sticking with tape or silly putty nearby. The rusty wheel hub was an easy fix. Thanks again you are a very good teacher.
A great idea, but I wish I had a borescope...
Nice content brother! Happy Saturday!
Great video, it is exciting That you have done the job. It is very helpful to someone who does that.
What I need to hear is Mr. CarCareNut looking at my spark plugs then telling me, "this is a very healthy engine"...that's a lucky 2AR owner
This is my first Toyota along with my first modern car,I was shocked reading the title about usually having to pull an intake for a pcv valve.
Very useful info. I'll give it a try on my 2010 LE! Thank you, AMD!
BROTHER 💪
YOU ARE AWESOME! 🔧⚒️
THE DOCTOR UNDER THE HOOD🩺⚒️🔧💪
THANKS 😊
FOR A WELL APPRECIATED VIDEO 👏👌👍
TAKE CARE
AND
STAY WELL 😷