You really are skillfull when it comes to repairing these bikes. Combining parts to something that works thats great. I was wondering i have seen a few people having problems replacing the back casette beceause of the cable not having a disconnect. I was wondering why no one just cut the cable in halve and make a connector in between? And would you know if it would fit a deore m6100 12speed?
Hiya where are you based I having difficulty in my bike burned motor they send me new one tried installing it still same problem motors works sound comes out but wheel never moves on
daft question.i put my lo26 in the back of my car.took it out to ride.now my pas does'nt kick in.i reset the setting to factory settings.still nothing.what have i done wrong
Hi, i wondered how you got on fitting the smaller controller for the 1000w motor, did it fit in the frame okay? If so I wondered if you would kindly give details of the model number of the controller and the seller who you bought it from? As an after thought does the controller have the loop wire to reduce the power to 250w like the large controller which came with the 1000w kit? As I wish to run at the reduced 250w rate! I'd very much appreciate your help with my enquiry as I'm following your conversion since my motor failed on my samebike LO26. Regards
@@tristatetech ok, I take it you couldn't find a small controller with the same functions as the original large one then. I know you said in your video you'd like to obtain a controller that would fit in the frame as the original did. I think I'll have to make a vented aluminium box to house the large controller that can fit to the rear rack I've fitted. (I'm concerned about overheating using the bag that comes with the conversion kit)
@@musmanov4642 hi, the reason behind it is that the physical size,dimension of the 1000w hub motor is so much larger than the 250w and hopefully I get a little more torque from that, leverage! ( in the video mark said that the power delivery of this hub was so much better than the original 350w so it's got to be better than a standard 250w ) admittedly power output is the same when set to 250w! I'm also intending wiring it up in such a way that through an ignition switch, feed to a switch on the handlebars, then at the flick of a switch I can change up to 1000w when off road if I wish.
hey, i have a question, how did you manage to burn the motor? i've been seing a lot of people burning the 350w motor on the LO26, but not many burning the 500w motor. did you force it uphill or overheated it or did it just die on its own without you stressing it too much. i have the 500w motor and i didn't have any issues with it overheating, even using it on cruise mode
Your seller is obligated to provide you with a 1 year warranty. My motor burnt out after 2 weeks and only 400km. This bike has been a compete nightmare.
@@tristatetech I have a 350W and the motor burnt out after 400km. Complete garbage. It would struggle up steep hills too even from the beginning. I wasted so much money on this. About £1200 total.
Hi mate , love the videos very informative. Sorry if its a silly question but does it matter what gear your in if you just using the motor? I ask because you have said on numerous times the motor has struggled even in high or low gear?
Yeah, like he'd rather spend time riding his bike instead of giving you more FREE information and what ever else you need and can't figure out on your own. The guy provides a lot of information and you complain. Ingrate!
Thats a cracking video mate. Top job.
i have lo26 11 which i think is great but my next bike will be mid drive because i live in hilly area
You really are skillfull when it comes to repairing these bikes. Combining parts to something that works thats great.
I was wondering i have seen a few people having problems replacing the back casette beceause of the cable not having a disconnect. I was wondering why no one just cut the cable in halve and make a connector in between? And would you know if it would fit a deore m6100 12speed?
Hiya where are you based I having difficulty in my bike burned motor they send me new one tried installing it still same problem motors works sound comes out but wheel never moves on
Great video. Mine needs new cogs on back but my cycle expert cannot do it. Can you help
daft question.i put my lo26 in the back of my car.took it out to ride.now my pas does'nt kick in.i reset the setting to factory settings.still nothing.what have i done wrong
I cant get this planetary gear off, you mentioned on min 4:25, I use the bike to work, any tip would be very welcome
Like the vid . Where did you get the 1000w motor and controller from ? Was it easy to fit
I second this, 1000w controller where?
Hi, i wondered how you got on fitting the smaller controller for the 1000w motor, did it fit in the frame okay? If so I wondered if you would kindly give details of the model number of the controller and the seller who you bought it from? As an after thought does the controller have the loop wire to reduce the power to 250w like the large controller which came with the 1000w kit? As I wish to run at the reduced 250w rate!
I'd very much appreciate your help with my enquiry as I'm following your conversion since my motor failed on my samebike LO26.
Regards
Didn't use the original controller, just used the much larger new one.
@@tristatetech ok, I take it you couldn't find a small controller with the same functions as the original large one then.
I know you said in your video you'd like to obtain a controller that would fit in the frame as the original did.
I think I'll have to make a vented aluminium box to house the large controller that can fit to the rear rack I've fitted. (I'm concerned about overheating using the bag that comes with the conversion kit)
why you want 1000w motor and reduce to 250w? isnt it weird? just get a 250w straight away or original 350
@@musmanov4642 hi, the reason behind it is that the physical size,dimension of the 1000w hub motor is so much larger than the 250w and hopefully I get a little more torque from that, leverage!
( in the video mark said that the power delivery of this hub was so much better than the original 350w so it's got to be better than a standard 250w ) admittedly power output is the same when set to 250w!
I'm also intending wiring it up in such a way that through an ignition switch, feed to a switch on the handlebars, then at the flick of a switch I can change up to 1000w when off road if I wish.
The same thing has happened on my Lo26 350w, could you tell the part number of the replacement motor or where I could buy a replacement motor?
contact samebike, they sent me a new one for free
My motor (350W) burnt out after 2 weeks and only 400km. This bike has been a compete nightmare.
Hi friend, is this the 350W motor version or the 500W?
hey, i have a question, how did you manage to burn the motor? i've been seing a lot of people burning the 350w motor on the LO26, but not many burning the 500w motor. did you force it uphill or overheated it or did it just die on its own without you stressing it too much. i have the 500w motor and i didn't have any issues with it overheating, even using it on cruise mode
I burnt it out going up a steep hill. I believe the 500W motor is much better. There are many people who have reported the 350W motor burning out.
Please, can you put the link to buy the motor? My Samebike engine burned out and the store wants to charge me $ 250 for the replacement
Your seller is obligated to provide you with a 1 year warranty. My motor burnt out after 2 weeks and only 400km. This bike has been a compete nightmare.
I'm curious how many kilometers you did on the original engine before it died?
About 700Km but it died because I was going up a really steep hill (25%)
@@tristatetech I have a 350W and the motor burnt out after 400km. Complete garbage. It would struggle up steep hills too even from the beginning. I wasted so much money on this. About £1200 total.
Is it really worth it replacing the motor if you still have to do steep hills?
How much teethes planetary gear have? 36T?
very good
Hi mate , love the videos very informative. Sorry if its a silly question but does it matter what gear your in if you just using the motor? I ask because you have said on numerous times the motor has struggled even in high or low gear?
the motor doesn't pass through the gears so it shouldn't matter
Hi, I would be also interested where to buy a replacement motor ... Thanks.
You have to email samebike and ask
I had no luck with Samebike. But I did get another motor from gearbest who I bought the bike from.
@@tristatetech hi which motor reference have you used to do 1:1 replacement ?
How much for motor
You forgot to show us how to push back the wires, and the motor, and basically almost everything which is importatnt.
you dont seem to like replying to the questions even when you do, u do it it with very minimal words used
Yeah, like he'd rather spend time riding his bike instead of giving you more FREE information and what ever else you need and can't figure out on your own. The guy provides a lot of information and you complain. Ingrate!
rather difficult !!!
great vid really helpful..cheers.