SO GLAD that I found your easy fix for the closer. This fix saved me $47.00 plus shipping! I removed the pins and rotated 180 degrees to free it up. Also sprayed some dry lube spray inside. Works like a charm! Thank you for your comprehensive video.
Thank you!!!!! My husband was abt to buy another one ugh... I found a tool to put thru & it worked!!!!! Thank you!!!! You sure saved me a trip to the hardware store & lots of $$$$$.
Thank you! Out of all the videos that I watched on the matter, your video made the most sense and worked. While the spring is a cheaper part anyway, I’m glad I fixed it and didn’t have to spend any money. Only one adjustment I had to make due to my circumstances. The retracting pole was actually slightly bent too so I straightened it along with everything you said and it worked.
Thanks a lot for the tip. At the first, it didn’t work, and I thought mine has a different problem. However, here is what I followed you.\ 1. remove the small screw (for air control) 2. don’t push the button, and follow the video. push up and down(left to right) 3. and it will close to the normal, and then put the air screw back, and try push out and it.
Thank you! I had some guys moving furniture out of the basement and instead of allowing me to hold the door they decided they knew how to work my door and messed it up. I had to order another bracket and this worked perfect with releasing the jam for my Larson door.
AMAZING! Spent months trying to figure out how to fix mine! Finally! This worked. I had to keep spinning the shaft 180 then 360 then 180 etc clockwise and counterclockwise until it unjammed. Thanks!!
Thanks for sharing this fix. I had the same issue as the one you demonstrated. Your instructions were clear and your visual illustrations were helpful. They helped me to feel that I could apply it to my situation. It worked for me! Thanks!
I’ve used this video twice to fix my closer on our front and back screen doors. I used the Allen wrench technique and a half turn to release the stuck closer. Thank you for this informative video. 😊
Great video ! I have a problem with the door closing too fast and hard against the door frame. I do have a door closers somewhat like the one you have where you can open the door and have it stay open to your preferred opening but again my problem is that the door closes too fast and hard. Can this be a problem with getting the right adjustment on the door closer ?
I'm not sure. These closers are created to close at a fairly slow pace so, if it's moving faster and harder as it closes, I'm not sure what the problem may be and unfortunately might be best suited to replace the closer but, still, worth contacting the manufacturer about.
Thank you. You were a life saver. The instructions were printed so small that even with glasses I couldn't read them and all I could think was, "this shouldn't be so hard!"
Thank you for this video, I don’t think the guy who installed the door told me about the closer). I thought the door was broken until I watched your video. I used an Allen key to turn it and It clicked a few times and that worked. Thanks again
I tried rotating 180 degrees, but it was stuck. My solution was to pull it out completely as far as it could go. After that, it slowly retracted back into the housing. I saved myself about $35-$40 bucks.
I have the same exact closer as the one that you demonstrated. It is brand new. My problem is that the door closes slowly and then when it gets to the very end it's slams shut. I have the tried the adjusting screw both ways clockwise and counterclockwise to no effect it does slow down the door but then when it gets to the very end its slammed it shut. Any idea what could be causing this?
Great tip! I have a Larson storm door, I had to remove my adjustment screw all the way, then turn it as you described, it released, and retracted. Thanks! John
Thanks this video helped me but who ever attached my pump to my door did not have it aligned right but unscrewing the pump and putting pin back in and holding tightly to screw back into the holes to screw back in worked for my problem! Thanks for doing this video…sending thanks from MN…my pin popped pot but It was not lined up to just put back in….
Can you explain what you did to fix the bracket that goes to the door jam? I think that’s the issue with mine. The screws keep coming loose and one is crooked. So when the door is opened it pops. Any suggestions?
My closer is just like yours, my problem is the closer lever started touching the door when closed causing it to lock open every time we open the storm door. Do you know what the answer might be? We had the door installed about 8 years ago and the touch lever just started touching the door a few weeks ago.
My door closer sometimes works and recently the door has been slamming and the screw was tight which meant that it was a slow close but sometimes it holds and sometimes it slams shut could the closer be no good?
I couldn’t get it to unjam so I bought another one (both same kind as are in your video) installed and it jammed too, and I can’t get it to un jam either. What is wrong?
Thank you so much for this video. With the winter storm we just had my door got stuck and the rod had bent. I got that straighten and didn't know how to retract the rod. I thought it was still broken. But with your help I'm back in motion
Yo nice 😂jokes on the jam no bs dude nice bro I stumbled upon the perfect video and you ain’t taught me nothing yet but I love you already my adhd is focused now lmao nba jam / jam master jay bro seriously good energy man god bless 333
Ok, I finally found instruction on the Anderson foot closure. To close it, just push door open a few inches and let go. Door closes. Only step on the bottom button when you want it to stay open. Hope this helps.
I did what you suggested and also removed the end screw to release the pressure and I still cannot get it to close. It got stuck open the first time I tried to use the button to hold the door open. Totally frustrated and the wind is terrible today, so I need to get this back on the door ASAP! Any suggestions? Please and thank you!
Hi Michele, thanks for watching. I'm sorry that none of those things have resolved the issue. As evidenced by other comments which I agree with, this is a very annoying product. Without seeing your closer, it's possible that it is fully jammed/broken which I know is disappointing news for you given this happened the first time you used it. I personally don't have another resolution for this kind of jam than what you've already tried. You may be best suited to just reaching out directly to Wright which I know doesn't help you with your immediate need. I'm sorry I couldn't be of further help. Stay safe and all the best in resolving this!
Such a common problem for many homeowners and renters alike.... Storm doors can drive you nuts if you aren't handy and know how to adjust them and maintain them. We highly recommend chains to help prevent hyper extension of the door...
Hi, I believe it was right to take the time to say thank you. I exactly had that problem and followed exactly your demonstration. Problem solved. Thank you and have a blessed day!
I am so glad someone with a collage degree came up with this closer. the old closers with the metal wedge just did not work- bull this new and improved closer will not work work- junk. it only allows my door to open about 1/3 rd of the way
If you only you got a college degree and learned how to spell and type a sentence or two properly. Geez, I lost brain cells trying to read your comment. Open a book or something.
I ordered a new closer as in the video to replace one that was bent. It arrived defective. The door would open but the closer hung up on every ring of the rod. It drove me nuts until I realized it was defective. It was replaced by the online company I ordered it from.
Great video. My closure jammed would usually just replace except this video saved me from that. My jam had to be turned many times to get it back in to place. Thank you!
My closer has a stopper on the rod to keep it open when your trying to go in and out of the house quickly and it ended up getting stuck open because of the stopper, I can't seem to pull it out any farther to get it unstuck I really need help, I can't find anything online about how to get it off, its stuck open with the stopper piece! Help mmeeee
@Neko Kat, mine is the same as yours. When I turned my rod (as shown in the video) it worked and retracted, thereby getting the stopper stuck in the middle. I just used the tip of a screwdriver to lift the bent portion and it slid right down (as rod continued to retract). Easy peasy! All fixed!
I had the exact same model with the exact same issue.. thank you for helping me fix it! On the side note though don't forget to loosen the address there at the other end to make the air come out easier to make this process easier 👍😁🤓👍
I have that model... the video does not make clear if the stopper button is open or closed when trying to release. I tried with the button open and my torque wrench 120 ft- lbs with no results. That is a ton more twist than your video. HELP!
While I can't see the extent of the hole/what happened, I presume you should be able to patch the hole. I unfortunately do not have a video on that issue. However, dependent upon your door, I imagine you should be able to find a video on this issue on TH-cam or Googling on that specific topic. Thanks for watching, sorry I couldn't be of more help, and I wish you the best!
@@SumukhComedy yes, but it was difficult and still gets stuck, maybe because it’s curved now. Same thing happened here the wind took it BIG time. New one?
@@lisab432 If it's still just getting consistently stuck, that's irritating, and so I hate to say that, yes, a new one is probably for the best. These aren't the greatest devices as evidenced by many frustrated comments on this video :) but at least it'll only cost you $15 or you could look at other possibilities that may be on the market that may be better. Thanks for watching and sorry I couldn't be of more help!
thanks for posting this info. I had the exact issue and was able to get it to close again but still kept getting stuck so called the 800 number and they shipped a new one no questions asked. Hoping this one works correctly
Just fixed mine for my dad. He was ready to head to the store for a new one. I said hold on let me youtube it. Never fails! thank you sir!!!!
3 years later and this video is STILL useful man!!!! thank you!
SO GLAD that I found your easy fix for the closer. This fix saved me $47.00 plus shipping! I removed the pins and rotated 180 degrees to free it up. Also sprayed some dry lube spray inside. Works like a charm! Thank you for your comprehensive video.
Your video is a lifesaver. It saved me $35.00 in purchasing another one touch holder! THANK YOU
I was ready to buy a new door closer until I saw your video. Thank you so much. I fixed it all by myself!
Thank you!!!!! My husband was abt to buy another one ugh... I found a tool to put thru & it worked!!!!!
Thank you!!!! You sure saved me a trip to the hardware store & lots of $$$$$.
Thank you! Out of all the videos that I watched on the matter, your video made the most sense and worked. While the spring is a cheaper part anyway, I’m glad I fixed it and didn’t have to spend any money.
Only one adjustment I had to make due to my circumstances. The retracting pole was actually slightly bent too so I straightened it along with everything you said and it worked.
Thanks a lot for the tip. At the first, it didn’t work, and I thought mine has a different problem. However, here is what I followed you.\
1. remove the small screw (for air control)
2. don’t push the button, and follow the video. push up and down(left to right)
3. and it will close to the normal, and then put the air screw back, and try push out and it.
Thank you! I had some guys moving furniture out of the basement and instead of allowing me to hold the door they decided they knew how to work my door and messed it up. I had to order another bracket and this worked perfect with releasing the jam for my Larson door.
AMAZING! Spent months trying to figure out how to fix mine! Finally! This worked. I had to keep spinning the shaft 180 then 360 then 180 etc clockwise and counterclockwise until it unjammed. Thanks!!
Thanks for sharing this fix. I had the same issue as the one you demonstrated. Your instructions were clear and your visual illustrations were helpful. They helped me to feel that I could apply it to my situation. It worked for me! Thanks!
I’ve used this video twice to fix my closer on our front and back screen doors. I used the Allen wrench technique and a half turn to release the stuck closer. Thank you for this informative video. 😊
Thank you! I had just installed this replacement closer and it "jammed" within a few days. Your instructions were right on.
Thank You!!! I had no idea what had happened to our door. Your clip saved me a lot of aggravation.
Great video ! I have a problem with the door closing too fast and hard against the door frame. I do have a door closers somewhat like the one you have where you can open the door and have it stay open to your preferred opening but again my problem is that the door closes too fast and hard. Can this be a problem with getting the right adjustment on the door closer ?
I'm not sure. These closers are created to close at a fairly slow pace so, if it's moving faster and harder as it closes, I'm not sure what the problem may be and unfortunately might be best suited to replace the closer but, still, worth contacting the manufacturer about.
Thank you!! I also had to change out the bracket then discovered the opener was jammed - this video was a game changer.
Just visited family and was able to fix their door which had been unusable for months, thank you!
Thank you so so much, my husband and I looked at your video a few times and he fixed it....thanks to you!!!! Thank you very much!!
Thank you SO MUCH for this. It was everything I needed and you saved me from having to come out of pocket for anything. You're fantastic!
You saved me $20 dude. I was about to order a new one until I saw your video & fixed mine.. thanks !
I am so glad I came upon your video. Super helpful. Empowering
Thank you so much, your description of the mechanism truly helped me fix my closer.
Thank you. You were a life saver. The instructions were printed so small that even with glasses I couldn't read them and all I could think was, "this shouldn't be so hard!"
Thank you for this video, I don’t think the guy who installed the door told me about the closer). I thought the door was broken until I watched your video. I used an Allen key to turn it and It clicked a few times and that worked. Thanks again
I have a different style but your method worked. Does it matter if you turn it clockwise or counterclockwise? I also put some lubricant on it.
I don't know that it matters but I turned it clockwise. Whatever works to get it unjammed! Glad it worked out for you and thanks for watching!
This fix worked on mine and it was an old one without the button. You saved the day..thanks:)
I tried rotating 180 degrees, but it was stuck. My solution was to pull it out completely as far as it could go. After that, it slowly retracted back into the housing. I saved myself about $35-$40 bucks.
Thank you!!!!! this just fixed mine 😁😁 Almost got my hair stuck in it tho hahaha
This!!! Turning it didn’t work but your suggestion did. Thank you!
Look at that! Over a year later and someone is using your video to get themselves out of a jam! Thanks!
I have the same exact closer as the one that you demonstrated. It is brand new. My problem is that the door closes slowly and then when it gets to the very end it's slams shut. I have the tried the adjusting screw both ways clockwise and counterclockwise to no effect it does slow down the door but then when it gets to the very end its slammed it shut. Any idea what could be causing this?
Great tip! I have a Larson storm door, I had to remove my adjustment screw all the way, then turn it as you described, it released, and retracted. Thanks! John
What about if the cap at the other end of that popped off. Should I glue it back or is there a way to get it back
Thanks for the tip. Saved me a lot of frustration. Who would have thought to try rotating 180 degrees. I also like the basketball analogy.
I have a closer like yours. I have the same problem. I have another problem, the button doesn't work.
Thanks this video helped me but who ever attached my pump to my door did not have it aligned right but unscrewing the pump and putting pin back in and holding tightly to screw back into the holes to screw back in worked for my problem! Thanks for doing this video…sending thanks from MN…my pin popped pot but It was not lined up to just put back in….
Can you explain what you did to fix the bracket that goes to the door jam? I think that’s the issue with mine. The screws keep coming loose and one is crooked. So when the door is opened it pops. Any suggestions?
I ended up replacing it. Here is a video with that information: th-cam.com/video/qpQFGH1Nsdk/w-d-xo.html
My closer is just like yours, my problem is the closer lever started touching the door when closed causing it to lock open every time we open the storm door. Do you know what the answer might be? We had the door installed about 8 years ago and the touch lever just started touching the door a few weeks ago.
My door closer sometimes works and recently the door has been slamming and the screw was tight which meant that it was a slow close but sometimes it holds and sometimes it slams shut could the closer be no good?
Worked like a charm!! Thank you!!
Awesome. Thank you. Winter storm blew it open and jammed my door. Worried awesome. Thank you
I couldn’t get it to unjam so I bought another one (both same kind as are in your video) installed and it jammed too, and I can’t get it to un jam either. What is wrong?
Thank you very much for your thorough instructions. I can now go back to DEFCON one, it’s fixed thank you so so much
Thanks, I just had the exact same issue and follow your instructions. Good job!!!
After seeing the last comment made about how long it took to get to the part they needed...simply just fast forwarded. Problem resolved. Thank you!
Thank you Sumukh, video worked perfectly! My wife asked why I hadn't fixed it earlier if it was so easy 🤣
Great delivery! A few dad-jokes. Thanks for the help!
Thanks Sumukh, bought 6 closers for parts and was able to fix some of them with you video.
Thank you so much! I had this issue for weeks and finally went and found this video. ❤️👊🏿
Thank you so much for this video. With the winter storm we just had my door got stuck and the rod had bent. I got that straighten and didn't know how to retract the rod. I thought it was still broken. But with your help I'm back in motion
Yo nice 😂jokes on the jam no bs dude nice bro I stumbled upon the perfect video and you ain’t taught me nothing yet but I love you already my adhd is focused now lmao nba jam / jam master jay bro seriously good energy man god bless 333
Thank you soo much hope you see my comment! I didn’t have idea how to fix it ! you make my day!!
I did see your comment and glad I could help and make your day!
I bought a brand new one and the door still won't stay open.
Does this have something to do with where it was placed?
Ensuring the button on the door closer is pushed down keeps it locked in place. Is that happening?
I have the v2012, but the rod is square and will not turn or twist. Any suggestions?
Very good video. Thanks for speaking at a nice tempo with great diction and accurate information.
Thank you so much. First time I tried you tube to fix something.
Great instructions! I DID IT!
If my adjustment screw is missing do I need to buy a whole new mechanism?
Perfectly explained and completely resolved. Thank you!
Thank you, this helped fix my Wright Products V2012WH and saved me time and money.
What do you when the closer (metallic part) is not turning?
Thank you for saving me $50! You helped me resolve my problem 🙏🏼
Ok, I finally found instruction on the Anderson foot closure. To close it, just push door open a few inches and let go. Door closes. Only step on the bottom button when you want it to stay open.
Hope this helps.
I did what you suggested and also removed the end screw to release the pressure and I still cannot get it to close. It got stuck open the first time I tried to use the button to hold the door open. Totally frustrated and the wind is terrible today, so I need to get this back on the door ASAP! Any suggestions? Please and thank you!
Hi Michele, thanks for watching. I'm sorry that none of those things have resolved the issue. As evidenced by other comments which I agree with, this is a very annoying product. Without seeing your closer, it's possible that it is fully jammed/broken which I know is disappointing news for you given this happened the first time you used it. I personally don't have another resolution for this kind of jam than what you've already tried. You may be best suited to just reaching out directly to Wright which I know doesn't help you with your immediate need. I'm sorry I couldn't be of further help. Stay safe and all the best in resolving this!
Such a common problem for many homeowners and renters alike.... Storm doors can drive you nuts if you aren't handy and know how to adjust them and maintain them. We highly recommend chains to help prevent hyper extension of the door...
How would you fix the button or would you just be sol
how to put the button back on the closer when it comes the wright tap & go type thanks in advance
Just like @AnthonySal but in my case it was husband about to go and buy a new closer, I did exactly as you showed on the video and voilà! Thank you!
this was the best intro ever.
THANK YOU for sharing.
“I” fixed it!
The key is the “Allen” wrench.
Thank you! This is exactly the fix I was looking for!
Hi, I believe it was right to take the time to say thank you. I exactly had that problem and followed exactly your demonstration. Problem solved. Thank you and have a blessed day!
will this work with a fully extended ARM
I am so glad someone with a collage degree came up with this closer. the old closers with the metal wedge just did not work- bull this new and improved closer will not work work- junk. it only allows my door to open about 1/3 rd of the way
If you only you got a college degree and learned how to spell and type a sentence or two properly. Geez, I lost brain cells trying to read your comment. Open a book or something.
I ordered a new closer as in the video to replace one that was bent. It arrived defective. The door would open but the closer hung up on every ring of the rod. It drove me nuts until I realized it was defective. It was replaced by the online company I ordered it from.
Great video. My closure jammed would usually just replace except this video saved me from that. My jam had to be turned many times to get it back in to place. Thank you!
I can't believe it!!! Worked like a charm. Thank you!!!!!!! 😊
Is this one a square rod/hole?
my friend a million thanks for posting this video I was going nut trying to push that metal back to its place great video
Thanks! Just used this video to fix my mom’s door!
Thanks! This worked for my Larson Door Closer which got stuck open. Saved a costly replacement.
As much as this video is informative, unfortunately this video didn't help my door closer.
I replaced mine today. It really wasn’t too expensive and I am not very handy. It was easy.
Agreed, but it was helpful in determining that the piston is likely seized and needs to be replaced.
I screwed my tight n still no stopping it from slaming shut,HELP
Thanks man!
How do U rotate a square rod?😢
My closer has a stopper on the rod to keep it open when your trying to go in and out of the house quickly and it ended up getting stuck open because of the stopper, I can't seem to pull it out any farther to get it unstuck I really need help, I can't find anything online about how to get it off, its stuck open with the stopper piece! Help mmeeee
Hi Neko, I'm sorry. Without visually seeing it, I'm just unfamiliar with how it may be operating. Is this also a Wright closer or another brand?
@Neko Kat, mine is the same as yours. When I turned my rod (as shown in the video) it worked and retracted, thereby getting the stopper stuck in the middle. I just used the tip of a screwdriver to lift the bent portion and it slid right down (as rod continued to retract). Easy peasy! All fixed!
I had the exact same model with the exact same issue.. thank you for helping me fix it! On the side note though don't forget to loosen the address there at the other end to make the air come out easier to make this process easier 👍😁🤓👍
Thanks. Worked perfectly. Saved me $23
This fix worked great. I only had to remove one pin to correct the issue. Thanks!!!
This actually worked for me. Thanks man!
Excellent! Looks like the rod is returning! Thanks!
Worked like a charm! Thanks for saving me money and aggravation!
thanks......you speak well and are a intelligent man. pleasure to listen to your instructions.
I have that model... the video does not make clear if the stopper button is open or closed when trying to release.
I tried with the button open and my torque wrench 120 ft- lbs with no results.
That is a ton more twist than your video.
HELP!
The button should be open/unlocked so I'm not certain why it may be more difficult to twist. I'm sorry I can't be of more help!
Pull on the skinny metal piece with pliers to make it go out even farther and it will release.
So glad I found this. I was able to fix it. thank you
Omg thank you ! It’s been a week since I’ve had my screen door open 😂 this helped.
Thank you for sharing. Marry Christmas
I was literally re-packing it to bring it back to the Home Depot 🤪
Helpful video and instruction; I was able to get my storm door closer back in working order...unlike Armando Benitez!
i have a hole in my door from someone pulling the closer off my door. is there a way to repair the hole?
While I can't see the extent of the hole/what happened, I presume you should be able to patch the hole. I unfortunately do not have a video on that issue. However, dependent upon your door, I imagine you should be able to find a video on this issue on TH-cam or Googling on that specific topic. Thanks for watching, sorry I couldn't be of more help, and I wish you the best!
The hex key trick worked!!! Thank you!!!
Thanks! But what if the rod looks bent ??🤔
Is it able to fully go back in like in the video?
@@SumukhComedy yes, but it was difficult and still gets stuck, maybe because it’s curved now. Same thing happened here the wind took it BIG time. New one?
@@lisab432 If it's still just getting consistently stuck, that's irritating, and so I hate to say that, yes, a new one is probably for the best. These aren't the greatest devices as evidenced by many frustrated comments on this video :) but at least it'll only cost you $15 or you could look at other possibilities that may be on the market that may be better. Thanks for watching and sorry I couldn't be of more help!
@@SumukhComedy I replaced it! Don’t be sorry! It’s nice to know I’m not alone in my jam lol😂
It helped me saved a lot of money! Thank you!
thanks for posting this info. I had the exact issue and was able to get it to close again but still kept getting stuck so called the 800 number and they shipped a new one no questions asked. Hoping this one works correctly
Thank you so much! This was the first video I watched and the best one! Thank you for a thorough and concise explanation!